Finger on the screen of the monitor

Similar Questions

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• Qosmio G20: How to get the higher screen resolution on monitor external 22 "

  I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

  I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
  1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

  What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

  If someone is so good!
  Espen.

  Hello

  The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

  Perhaps an update of the graphics driver could help.

  By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

  Check also these forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767

• Screen LED-2311 x - idle time return to the screen of the monitor

  Hello

  the only problem I'm having is that when my computer shuts the screen due to idle time, when I move the mouse to wake up, the monitor will be taken more than 10 seconds to display the... I got more than 5 monitors, all display the screen in 5 seconds.  Why HP monitor takes so long to display? Anyone know the answer?

  Thank you.

  Socius

  Hello

  Are your other monitors LCD or LED?

  The LED should not need any time "warm up".  Disable power saving mode and see what happens.

• 860 - 009na: the monitor turns off during access to / applications change full screen

  Hello

  I got a new computer packed with the HP Envy 32 inch monitor. I am running on an issue that is simply irrating and I don't know how to solve it.

  Basically, the screen is empty. It is not a hard lock or whatever it is, he decides just during initialization more applications full screen (IE, a game) or even post Win10, connect, when computers are like "flickering" during the swap, the screen just turned off. This can be resolved by switching on the monitor input channel, or put the monitor in standby and distributed. On these occasions, I get sound through the screen.

  So appearances, the screen continues to receive entries from the computer and because of switching the monitor off and on again, it display image as expected. This is a case where the monitor is simply decide that it does not want to display the image for reasons unknown. Such as energy conservation.

  I updated the graphics card, provided I got most up to date display driver, double checked the connection... it just happens.

  It feels like it some really boring affecting somewhere that makes the screen, and I really want to change it. For the moment, it is a rate have to turn on the screen and two times just to get the start menu, then if I insert a game, he does even once, when I leave the game, does it again. It does not occur when a game that supports the windowed mode - without borders is loaded (I guess because it is not 'true full screen').

  Thus, it seems to happen during this process to set full screen.

  Well, there is another cable that I was not in the box titled "DisplayPort".

  So I changed my HDMI cable to use this one. The monitor works perfectly now... so as a workaround, this solved.

  But the question remains, why the monitor was so weird when using HDMI? It might be marked up as a potential problem.

• The screen on a monitor HP L1925 is not bright when I use a NVIDIA driver

  Windows XP; Monitor HP L1925; Graphics NVIDIA GeForce 9400 GT and driver card.

  When you're under the GeForce 9400 driver, HP L1925 screen is not as bright as could be. However, when I start mode safe mode, the screen is bright white. The monitor HP L1925 therefore has a problem with the NVIDIA GeForce 9400 driver. The driver is updated.

  In contrast, an Acer AL1715 monitor has a white screen shining under the NVIDIA driver.

  Support NVIDIA said that it is not a known isssue.

  Any advice?
  
  Thank you

  MichBALT

  Hello MichBALT,

  If the monitor is just aging? You see similar results on other computers?

• line that appears on the monitor screen

  There are line appearing on my screen, says that there is a problem with the image, and then asked me to restart my laptop. now im in safemode, my speakers does not work, what could be the problem?

  In Safe Mode, many devices do not work, then no sound is not a problem here. Connect an external monitor to your computer laptop, is the line shown in the monitor as well?  It seems that if your laptop must be taken to a workshop for diagnostic work.

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• White on the screen of the monitor

  Most of the games I have installed in the system Windows 7 when I run it starts to a black screen and keep black go forever.

  I do physical reboot by pressing the button. What I notice is the monitor power LED is orange, which means no signal is sent to the monitor. The only game that labour is now the other Left4Death DEMO does not at all. Other games that I have that does not work is FEAR2, CALL OF DUTY 2, HALF LIFE orange box edition. My system is Intel Core2Duo 4 GB of RAM and ATI Radeon 5850 operating system than Windows 7 Ultimate 32 - bit Edition. I try checking the Windows Firewall for the authorized program still not working. Help, please. Thank you

  Hello Yellowcali
  Please write to the Microsoft Forums.

  I suggest you to update the drivers of graphics for Windows 7 on this site:
  http://support.AMD.com/us/gpudownload/pages/index.aspx
  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Windows XP: the monitor screen is pink

  Original title: John Isaacs

  My screen has turned pink. Would it be a bad screen?

  Bad track or show the wrong adapter.  If you connect the monitor to another computer and the screen is pink while the monitor is bad if you connect another monitor well known on your computer and the screen is pink then the graphics card is bad.

  John

• AL1716 screen turns black after a few seconds. If I turn the monitor power off & on again, it works - 2s

  The monitor worked fine for a few years, so is no longer under warranty. I was about to throw.

  Then the monitor I bought to replace, was damaged on the way to the group practice site.

  Now, I hope to fix the Acer monitor.

  When the computer starts, and a new screen loads, the monitor it shows for a few seconds. Once the computer on the desktop, if I turn off the monitor and turn it back on, it displays the desktop perfectly for a few seconds.

  The monitor I replaced it with also works very well with the computer. He collided with another device, when the car in front of me stops suddenly and there is a piece missing from the screen in the lower left corner. It looks like modern art in the lower part with some of them white and black and a few vertical lines and horizontal lines. I can continue to use it, since what I need lies in the upper part of the screen. I learned the keyboard command to shut down the computer. The windows key, followed by the right arrow, followed by the Enter key.

  I watched a few videos for repair of monitor on Youtube.

  It seems that the capacitors are the typical element which spoils first.

  So I guess I'll break the front off the monitor and see if the card has the capacitors top of the pop up. I can use capacitors with the same intensity of micro-Farouk and the voltage equal or better than the other monitor.

  I've recently learned step secret beginning of successful welding.

  You must have a clean tip.

  When you clean the tip of the soldering iron, it should have the appearance of copper. If weld does not stick to the point, it is not clean enough. I used a wet sandpaper dry and scoured it. They are sold with a protective coating that must be removed. If it is not removed it clogging the tip.

• Window of email Outlook Express is lost on the side of the monitor and can not be read or moved. How to open the middle of my screen? Lorraine

  Windows XP.    I use Outlook Express to get my e-mail address.    When I open the e-mail message, he disappears on the side of the monitor with just a tad showing so I know it's there.   I can't move it with my mouse.  I have to click on the advice of the taskbar, click on maximize and then it fills the screen.  How can I get the e-mail to open in the middle of the screen, and hiding on the edge?

  Thank you.

  I'm not familiar with Outlook Express, but here are a couple of common solutions for windows that are out of the screen as you describe...

  (1) with the active window (as when you open just it), press Alt-space, and then press the button "M".  Then try using the arrow keys on the keyboard to bring the window on the screen.  Press "Enter" to move the window.  If it works, try to close the window at this time (I hope that it will save the current position of the window), and then reopen it.

  (2) try a right click on an empty space in the taskbar and select "Cascade Windows".

  HTH,
  JW

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.

• Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

  Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

  Hi Sdaugherty3,

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.