finished loading at startup in Vista?

Similar Questions

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Stop programs from running automatically at startup in Vista

  Hello

  I need to stop a bunch of programs to run automatically when my computer starts. I have about four programs that I need not run unless I open them myself. Their icons are listed in my lower right. A technician told me to stop running and it would be useful to my computer work better. I don't see this option in the Manager of tasks under Vista. Is this another place where I can manage which starts and runs and this isn't?

  Thanks much for any help!

  ~ April

  Individual programs have preferences that you can access and prevents them from running on startup?  If you right-click on the icons in the Notification area are there similar options available?

  Otherwise you can disable them to load at startup via the tool MsConfig and his ' tab Statup.

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310560&FR=1&PA=1&SD=HSCH

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• just loading at startup screen but after loading is the screen is completely blank.

  original title: help with a Windows Vista laptop please help.

  When I start my HP Windows Vista laptop, it works very well and just loading at startup screen but after loading is the screen is completely empty. The keyboard works fine and the keyboard lights are on but nothing on the monitor. Help, please? Passing on the black screen the arrow appears, but again, it is all black.

  > @dhhuang they don't tell me because I have no guarantee and it's like over $ 100 just for talking on their phone, which I think is not worth.

  I'm sure you can order a set of recovery disks. You need to talk to a technician to do it. Yes?

• Microsoft Update 3 of 3, has not finished loading. The computer automatically restarts and repeats the same continuous process

  original title: Microsoft Update 3 3 loading is not finished. The laptop restarts itself and repeats the same process continuous - not a techie - please help!

  My laptop has vista, I lit and tells me that Microsoft Update 3 of 3 has not finished loading. The laptop restarts automatically and repeats the same process continuous - I can't access the start menu or anything - what should I do?

  char1822,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  05/23 / 1107:53: 57 pm

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to limit which loads at startup?

  Is it possible to limit which loads at startup to speed up this operation?

  This can be done with msconfig.exe or AutoRuns.

  If your shoe is slowly, follow these steps:

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with this Toolkit from Microsoft.

  If it is not to speed up the startup process, follow my guide [2] to start track and compress the boot_BASE + CSWITCH + DRIVERS + POWER_1.etl 7z and RAR and transfer it to your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  [3] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows services won't load at startup

  I had a load of automatic update and now I have multiple errors at startup.

  The main error I get at startup is:

  C:\windows\system32\config\systemprofile\desktop is refers to a location that is unavailable.  It could bo on a hard drive on this computer or on a network.  Make sure that the disk is properly inserted, or that you are connected to the internet or your network and try again.  If it is not found, it could have been moved to a different location.

  There is nothing on my desktop but the trash.

  I tried the system restore and received this message: C:\windows\system32\rstrui.exe.  Long-term services or group was able to start.

  I can start safe mode and everything starts with limited capacity.  When I start, I can't access any change, even with my user designated as 'administrator '.  Nothing based on loads windows, and I can't do windows update.  When I try to use these programs, I get a message about a file missing named ATL DLL and asking me to reinstall.  I don't know what it is and hesitate to install something that I don't know.

  This all started after the update loaded 08/13/10.  I ran several anti-virus (avast, trendmicro) programs and have no virus found.

  I tried to do a repair on startup and it does not work.

  I'm afraid I'll have to wipe my hard drive and start from scratch, but I hope I don't have to do something drastic that.  Any suggestion would be appreciated!

  Theresa

  Hello

  First try SFC and chkdsk to erase corruption General and repair/replace damaged system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  After the foregoing:

  Not found ATL.dll error resolution<- check="">
  http://pcsupport.about.com/od/findbyerrormessage/a/ATL-DLL-not-found-missing-error.htm

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A drive mapped on P to P does not load at startup upward.

  My question is similar, but may have a different answer.  I have a peer-to-peer network and my computer plays the main role.  In the morning he gets turned on first so that other computers can charge the player.  Some of my programs require that the mapped drive is the same on all computers like me.  The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected.  I then manually go and plug.  Again, it is annoying more then anything.  Any suggestions?

  Hi Loreman,

   

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that mapped drive does not load at startup to the top.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  Follow the methods and mark the question below:

  Method 1:

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 2:

   

  Drive mapped to the network connection may be lost:

  http://support.Microsoft.com/kb/297684

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

   

• How to limit the programs that load at startup?

  How to prevent apps will load at startup?

  One place to check: Apple menu > System Preferences > users and groups > click the user in the left sidebar, then the login at the top items.

• I get a Firefox software update, but it never finishes loading. never. as ever.

  When I open Firefox, I get a msg of software update and when I click it, it never finishes loading. It says it connects to the update server, and the blue loading bar keeps running across the screen.

  Please go to www.getfirefox.com and download and install Firefox 18.0.1 from there.

• Last downlod of foxfire causes my PC to freeze and takes forever to finish loading.

  It works for a short time and when I refresh or turn a page, it freezes. I have to restart my system when this happens. Also the task manager sees nothing wrong and tells me that the site is running.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  You can try to decrease the value of the pref Network.http.Max - connections from 255 to a setting more modest as 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

• I understood the problem, but don't know how to fix it. It is said to run dxdiag because of the direct 3D, so I run dxdiag and it finishes loading, I test direct 3D and it works very well...

  I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo

  I have:
  (1.halo of the trial
  (custom edition 2.halo (full)
  Halo is ever going to work on my computer
  because he never did
  I play with my cousins that I visit about 3 times a year

  Hello

  I suggest you go through the link.

  Minimum system requirements for Halo: Combat Evolved
  http://support.Microsoft.com/kb/829479

  Please check if the computer meets the minimum system requirements to play HALO game
   
  You can also refer to:
  http://support.Microsoft.com/kb/829478

• CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  Not a matter of Microsoft/Windows.

  http://answers.Microsoft.com/en-us/search/search?searchterm=CHKUPD&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_xp-files&askingquestion=false

• Programtries to load at startup that I'm not sure.

  A startup name program: (5BB4B692-C213-DAD1-E621-571CE305F4CO), file: c:\documents and settings\myname\application data\faagge\cuavt.exe tries to load at startup. What kind of program is this and should I allow this program use or continue to block?

  On Friday, February 11, 2011 16:11:58 + 0000, BenXP333 wrote:

  A startup name program: (5BB4B692-C213-DAD1-E621-571CE305F4CO), file: c:\documents and settings\myname\application data\faagge\cuavt.exe tries to load at startup. What kind of program is this and should I allow this program use or continue to block?

  A search on the web for cuavt.exe can't find anything. This means that he almost
  Certainly a malware infection (either a virus or another type of)
  malicious software). It is very common for malware to generate names at random, since
  the author does not want you to know anything by a web site
  image search.

  Ken Blake (MS-MVP)