Help! Unable to connect USB with the computer!

Similar Questions

• Unable to connect keywords with the imported photos

  have a PC Winsdows 8.0. and Litghtroom 5.7. I want to be ready to a computer breakdown and all my photos stored on an external drive. When I reimport to determine if I know how to do it correctly, photos come with no keywords. I checked the hirarcy button key words and exported the original internally. When I reimport there are no keywords or changing data. I know it's in the catalogue, but do not know how to connect witih photos. I have to re key word and edit all photos by 11,000 or so if I had a crash. I'm not a computer person and I try forums etc, and all I get is "remember the catalogue is here as well as photos" it is there but does not connect with the photos. Really frustrated please please help. Thank you

  The problem is that reimport is not the right thing to do. Never re - import!

  To restore everything after a crash, you restore a backup of the file catalog to its location of origin, and you return all the photos in their original location.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• USB ports do not work, although I can charge my phone with the computer, it wont let me view my data from the phone.

  I had my computer about a month ago and it was working fine. But then, all ports usb stopped working on me. Although I can charge my phone with the computer, it doesn't let me see my data from the phone. I've tried everything.

  I'm guessing that this problem came from me turning off the computer by disconnecting it instead of turn it off manually.

  Help, please.

  Hello

  
  1. what happens when you try to connect any USB device to the computer? You receive an error message?
  2. What problem is specific to any USB device or all devices?
  3. what troubleshooting measures have performed up to now?
   
  Do the methods and check if it helps.
   
  Method 1
  Try to use the phone on another computer and check if you are able to access the data. If you have the same problem on another computer then the problem is with your phone. If you are able to access the data, then perform method 2.
   
   
  Method 2
  Reinstall the USB controllers.
  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  (a) click Start, then type Device Manager in the start search box, and then click Device Manager.
  (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  (c) once complete, restart your computer. Your USB controllers will automatically install.
   
   
  Method 3
  Run the fix - it tool and check if that helps.
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics
   
  Response with more information to help you.

• Is it possible to connect and reconnect a keyboard with the computer on?

  I have now 2 iMacs Office sitting side by side on my desk.  Since I want a keyboard with a numeric keypad on the right side, I found the only way to get that with an Apple keyboard with a USB connected keyboard.  Therefore, when I want to knit back and forth between macs, I have to unplug the keyboard of one and then plug it in another one - and back.  It would be a hassle to turn off mac whenever I need to do that, so I was wondering if it would damage a computer.  Two usb ports are usb powered external hubs.

  There is no problem with the device on a keyboard with the computer and plug in another.  It's only external drives that need to be removed before unplugging.

  

• Error 1073807246 after connect the datalogger with the computer

  I have labview vi to get data from the data logger.

  First of all, it is excutable without error

  

  , but when the data logger is connected to the computer (COM1 serial port), my vi labview error 1073807246 shows.

  I know a little about this error, it means open a visa which was opened, but donot why error occurs when the datalogger connect with the computer.

  I just copy this previous labview vi of the lab computer, it worked well on this computer.

  Thanks much for any help.

  

  It's pretty clear you have some major, major misconceptions. The provider software is not required for a LabVIEW program and in fact is at the origin of the conflict. Windows allows more than a program unique access to com ports and as long as you remain convinced that you have continues to run this program, the LabVIEW program will never run. Certainly, the other pc is configured to use a port com for this program and for LabVIEW.

  If indeed the other program is needed, the program LabVIEW was written not as a comprehensive control program.

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• AirPlay does not connect without restarting the computer

  Hey guys,.

  I work in a school and all teachers have a MacBook Air 2011 or newer running 10.10.5 or newer. Many also have Apple TV connected to projectors so that they can use AirPlay to reflect their computers to projectors. So here's the problem:

  A couple of my professors can connect to their Apple TV and use without problems, but when they log off of Apple TV, the image of airtime in the bar of menus remains blue (which is normal when AirPlay is enabled). The problem is teachers are unable to reconnect to the Apple TV because the computer thinks it is still connected. Restart the computer to log in again!

  The computer will display the Apple TV as a device which we can connect to, but it never connects once it has been disconnected. It is a problem because teachers often connect to view a video and then disconnect so that they can work on their computers. If they try to reconnect, they need to restart their MacBook Air.

  ATV is up-to-date. Has been restarted and connected to another network and always has the same question. Not sure if this is ATV related or associated with MacBook Air. The two devices are connected to the same network that has no restrictions.

  I think I've cracked it because I had the same problem and since there are 2 minutes I solved it.

  Open activity monitor

  Click on the tab network and research AirPlayXPCHelper.

  This quick process and fact.

  Not sure if you have to do each time it stops working, but it is much faster that restarting your computer.

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• Dell V313 printer cannot communicate with the computer

  When I try to print from my Acer Aspire Windows 7 on my dell v313, I get the message "communication not available - the printer cannot communicate with the computer. It's already happened, but when I restarted the computer it would print. Now, it won't. I replaced the USB cable and downloaded the last Cabinet V313 - and the software. Ink cartridges are filled. I am holder of a horse's hoof and a 4 leaf clover; but nothing works. What can I try now? Thanks for any help,

  Mike

  Mike,

  You can try to disable the ToolTips of printers. If the printer is wireless, try channel 11 in your wireless router. You can also try to remove computers printer scan list and then restart the computer and see if it prints.

  Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

  

  Rick

• N911a HP Officejet Pro 8600 error scanner cannot communicate with the computer.

  Original title: is anyone has the sweep of HP Officejet Pro 8600 n911a problems when you use Windows 7 Pro?

  Just bought this laptop of HP Pavilion dv6-7138us, and had the updated operating system upgraded to Windows 7 Pro, directed by Office Depot until I take possession.  The all-in-one HP Officejet Pro 8600 n911a (bought a few months ago) will be analyzed to this laptop.  I can't access "managing the scan of the computer."  When I try to open the scanner of the icon, the message begins with "scanner cannot communicate with the computer."  I was on the HP support forum, tried to uninstall and reinstall the driver, even tried to download the driver on the net, you run printing HP & scan doctor, tried all disconnect them reconnect restart options, all without success.  The functions of printer normally with this laptop and the printer function scanner AND correctly on other two laptops running Windows XP Pro.  Which makes me suspect that this is a problem Windows 7 Pro.  Could this be just?

  My apologies if this isn't the right forum for my problem.  Please redirect me if this is the case.

  Any real help will be GREATLY appreciated.  It's so frustrating!

  Thank you.

  Hello

  1. you have any security program installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to disable any anti-virus program and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can also run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 3:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  See also:

  "The computer cannot communicate with the scanning device" Error message in Windows Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=NL&DocName=c00852756&LC=en

  I can't scan in Windows using the HP software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4323659

  Hope this helps and let us know if you need more assistance. We will be happy to help.