Firefox can not navigate on the internet until I clear a 'OFF LINE WORK"ITEM IN THE MENU?
How can I "run job line?" to allow Firefox to surf the net?
Probably you use FF4 (?).
If so, follow these steps.
- Right-click on an empty part of the tab bar, and then click the top option called 'Menu bar'. This will remove the orange Firefox button, but restore the text links at the top.
- Click on 'File', and then click "Work offline" to remove the check mark. You should now have Internet access.
To restore the previous layout, repeat the same steps.
Tags: Firefox
Similar Questions
-
Can not navigate using the address bar
I can type an address in the address bar or choose from the drop-down list, but Firefox will not respond. I've updated my Add - ons, but that did not help, so I started the browser in safe mode, but the problem persists. I tried to install a more recent version, even though I was already up to date, but which has not yet solved the problem.
Any ideas?
Thanks for publishing and confirming a create a new profile corrected it for you.
I have made a few posts and update most of them, but missed this thread so far. I'll uncheck the station you have chosen as a solution and mark this on the spot.
I know that is not intuitive, but for everyone suffering from this bug, it's a problem with the bookmarks database that breaks the: address bar. address bar | URL bar | awesome bar, or anything else you like.
Current fix suggested. (Bug 1180419 partner)
Rename the places.sqlite file as explained in this recently revised article.- Impossible to add, edit, or save bookmarks - how to fix _fix-the-bookmarks-file
I will post more shortly and updated information further down in this thread and edit my previous post/solution (#answer-750303)
There is one bug fix in one of the pre versions release already, and with a bit of luck, this will be in the regular version in the next few days.
-
Why firefox can not read all the videos I have youtube?
I can't access all the youtube videos
set firefox as default browser
-
Why firefox can not open with the default profile. It should be renamed?
trying to install "malwarebytes" for extra protection, the Norton toolbar on firefox has been reduced in size by losing my option "Vault". This prompted reinstalling on securities Notion which then prevented the opening of firefox. Internet Explore works well but I use firefox for years so why change. Firefox won't open (even after being uninstalled and downloaded and reinstalled. The message 'your firefox profile cannot be loaded, etc.' following the instructions of your forum, I locate a profile with the word 'profile' embedded file. The word "profile" in the flow path is preceded by a weird name (such as a foreign name). Path =
'C:\Users\Owner\AppData\Roaming\Mozilla\Firefox\Profiles\bzjajhor.default-1419035389504 '. This file needs to be renamed and can they?Please help me to go back to firefox. Thank you
Do not rename a profile folder.
It seems that there is a problem with the profiles.ini.See:
This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.
- Windows: %AppData%\Mozilla\Firefox\
C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\. - Linux: ~/.mozilla/firefox/
- Mac: ~/Library/Application Support/Firefox /.
You can use one of them to make Firefox/reuse to create a new default profile:
- Remove the profiles.ini file to force Firefox to create a new default profile
- Use the Profile Manager to create a new profile
Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
- Windows: %AppData%\Mozilla\Firefox\
-
Geezer buy Sandisk mp3 player. can not navigate to the songs on the player.
I want to drag and drop songs from my record collection. Joy! I can do it!
Once the songs are in place, however, it doesn't seem to be a way to find other special songs that clicking on all the ones I installed.Also impossible to find how to take control of Winamp. It appears automatically install tons of things indiscriminately, stuff is on my C drive. so, I have to remove it.
You need to talk to the people of support that make the MP3 player and poster in the Winamp forums.
-
I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords. Help, please!
Tools > options > Security > passwords saved...
-
When I downloaded Firefox and checked my extensions, I've been informed that Firefox is not compatible with the prevention of malware from my Webroot security package. I use it successfully with Windows and just renewed for another year. What do you do to protect myself? I'm not a computer expert, so if you can answer in plain language that would be appreciated. In addition, we stream video much and I noticed that DivX is also not compatible. What should I do about it? Thank you.
Firefox has had its own fake Web / since 2008 malware protection.
http://www.Mozilla.com/en-us/Firefox/phishing-protection/Firefox Add-ons developers are responsible for these add-ons up to date as new versions of Firefox are available. Check with Webroot & DivX on updates for their Firefox extensions.
That said, the modules that are hosted on the official website of the AddonsMozilla.Org are tested and 'hit' by compatibility automatically, if these modules are considered to be compatible with a new version of Firefox that is about to be released. For modules that are not "compatible", the developer of the add-on Gets an email telling them basically what needs to be fixed. AMO extensions hosted are automatically updated as required by Firefox. The 'check' available updates each time is that Firefox is open.
For modules that are not hosted on AMO, there is a 'updateURL' function that allows to have Firefox check for an update across the internet, the a particular extension developer said. Unfortunately, too many developers take advantage of this feature and needlessly let their users to search an update themselves. who then need to manually install the hotfix or update version.
It's like a bunch of clowns of circus without master ring to 'bring in the clowns' at the right time in the show.
-
Can not get on the internet when you use the merge with WindowsXP
I upgraded to Fusion 2 and am running Windows XP. Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows. Now I find that I have to check Windows after 30 days. I can't WMWare to help me after 30 days of free support (which is a bunch of Bull). Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work. Can someone help me please?
Jim
JudgeJim wrote:
Problem: I can not go on the internet whenever I'm on Windows. My Mac is not a problem with online. When I start the merge, I agree, but when I start Windows XP, it tells me this:
Could not open/dev/vmnet8:
No such file or directory.
Virtual device Ethernet0 will start disconnected
Sometimes it will say instead of vmnet8 vmnet0
If you have found errors like that something is not right. Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.
I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).
This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal. So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.
I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.
I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help
If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network. If you change the types of networks while the guest id launched, you must release/renew the IP address. Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.
I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.
Uninstall/reinstall Fusion and restart the Mac.
Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.
If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.
-
in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
Downloaded a lot and now can not see how to fix it?The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.
-
I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."
What is this extra menu?
In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.
-
Firefox 4 for Mac after upgrade I can not type in the comments of several web sites area
I've upgraded to Firefox 4 (beta very well executed) and now I can't type in the text boxes on a number of websites and surveys etc. For example on the Gigaom site I can not type comments (the name is fine, but the comments box does not work). But this is just one example. I ran across it on three other sites. Any ideas appreciated. (OSX 10.6.7, works fine on safari)
I had a problem like this, and it is thanks to fonts that were corrupted in Snow Leopard 10.6.7. Apple has a fix on its support page.
-
I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet. The icon shows "acquiring network address". I connected the router directly on laptop computer connected to the wireless network and still unable to connect. I tried to restore the system as well, but the message says "unable to restore the system, no changes were made. Help?
original title: acquisition of network addressHello, Steve.
Try this link below on how to reset IE and let me know if it helps. -
I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver
See the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520Make sure your network connection is working and properly configured.
You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
4. Select "Network adapters" under common hardware types, and then click Next.
5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
6. click Next and follow the remaining instructions. -
Network connection problem
Hi all
After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:
There might be a problem with the driver for the wireless network connection card
Windows could not automatically bind the pile of IP protocol for the network card.
There might be a problem with the driver for the connection to the Local network map
Windows could not automatically bind the Protocol IP on the network card stack.
Details of detection
Diagnostic information (network card)
Network card diagnostics information:
Network adapter driver to connect to the Local network information:
Description... Broadcom NetLink (TM) Gigabit Ethernet
Reference the manufacturer... Broadcom
Provider of... Broadcom
Version... 14.0.1.0
The name of the INF file... C:\Windows\INF\oem5.inf
Date of the INF file... 14.05.2010 21:21:56
Name of the section... DEV_KEY2. NTamd64.6.1
Hardware ID... pci\ven_14e4 & dev_1692
Instance status indicators... 0x180200a
Status code from device Menager... 0
IfType......................... 6
Physical media type... 14
Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.
Any other ideas please. This really seems teribble :(
Thank you
Nikola
Hello
You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:
netsh winsock reset
netsh int ip reset log.txtHow to run the command prompt as administrator (high) is here:
http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions
part:
How to run a command with elevated privileges?
LC
-
I try to open the version cc 2015 Photoshop in my office, but it can not open properly, before update until 2015, 2014 version is fine.
Hi to wing,
Please provide more information such as: -.
> What operating system is your computer works (Windows 10, MAC 10.10.4 etc.)
> Your computer specifications (quantity of RAM & graphic card)
> What error message do you get when you open Photoshop
> Post a Screenshot
Click on the camera icon in the menu editor to download the image stored on the current position of the cursor
Concerning
Assani
Maybe you are looking for
-
How to get the podcast of the website on the phone
I was told to put that feed into the PODCASTING app on your iOS device. The site in question is https://randirhodes.com/how-to-get-the-podcast/ I paid for a premium podcast, now how o I get this podcast to appear on my iphone 6 s more in the podcast
-
Contained in the factory of recovery failure
3000 N100 Type: 0689 A42 Vista Basic Background: I pressed the F11 at startup the rescue and recovery program in order to have a recovery (content of the plant). Then, the system has begun to preload the customization. However, in State of play (the
-
Remember - this is a public forum so never post private such as ema information You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
Hello I just bought a Pavilion dv6 notebook PC and have problems to load photos on sites like Facebook or Tumblr. I can still download fine on my old laptop, but not the new. I turned off Norton 360 to see if that was the problem, but still couldn't
-
High availability of Hyperion 11.1.2.3
HelloWe need to implement high availability. The Oracle document shows compact deployment and horizontal scale (and may be this is the reason for which it does not deploy serve App on the second server). But what happens if we want to affect a serv