Firefox causes my computer to lock up and I tried everything

For two weeks now, Firefox has been lock my computer. NOT on the first, but maybe 5-10 minutes after.
I have followed the corrective actions / troubleshooting above and still have the problem.
The computer does NOT lock upwards using Google Chrome. I prefer to use Firefox, however.
I have a laptop Dell Inspiron 1545, using Windows Vista 64-bit
I will try to create a new profile and see if it works.
If not, what would I do?
Well, he didn't.
Any other suggestions.
OR I'll just have us to Google Chrome?

You can associate the high CPU/gel with any particular websites or content types?

Does make a difference if you turn off the Avast Web Shield? Other users have said that he made the recovery of web pages a little faster to the does not filter them, but I don't know if it can cause blockages. Of course you would only test this on 'safe' sites

Tags: Firefox

Similar Questions

  • I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile,"

    I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile. It may be missing or inaccessible"and Firefox does not open.

    I tried press windows key + R on my computer and open %appdata%\Mozilla\ - and rename the folder labeled "Firefox", but he said that "the action cannot be complete because the folder or the file that is open in another program" I didn't open it and try to restart the pc, but still no help

    A likely cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

    • Windows: %AppData%\Mozilla\Firefox\
      C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
    • Linux: ~/.mozilla/firefox/
    • Mac: ~/Library/Application Support/Firefox /.

    You can use one of them to make the Creation/use of a new default profile for Firefox:

    • Remove the profiles.ini file to force Firefox to create a new default profile
    • Use the Profile Manager to create a new profile
    • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • Firefox causes my computer to crash.

    After a clean install of Windows 7 64 bit on a new hard disk, I downloaded and installed Firefox. My computer is lock within seconds from Firefox. I had to reboot the computer to turn on. This confinement is also happened several times with Win 7 & Firefox on an old hard drive. I uninstalled Firefox, so I can use my computer. I ran Firefox for several years on Windows XP without any problem. How it works with Windows 7?

    Guys, I think I solved the problem! I replaced the video card 8500GT card 8400GS yesterday and downloaded the 337,88 drivers. So far so good. No crashes/locks/gel. I appreciate your help! I guess we can close this one.

  • Firefox crashes on. Its the latest version, Ive tried everything, I'm really not sure why it crashes?

    Whenever I try to watch videos from facebook, it crashes. I even scanned my computer for viruses, but its own. IM really not sure what is wrong?

    Ive tried everything above. Ive reset firefox, uninstalled and deleted the plugin pokki. Hardware acceleration unchecked Ive also removed the protected mode. Oh and by the way, I did that a single flash, IE 16 and not 15

    always the same, it crashes.

  • I can not eject my cd in the cd rom drive. It seems to be stuck and I tried everything to get out. help please

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    On most readers it is a small hole, normally just below the status bar, if you can find it is to use, straighten out a paperclip and push gently into the hole and the player must free

    Hope that helps

  • I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I've tried everything.

    I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying

    See "hang out":

  • My iPhone 5 will not load and I tried everything.

    I have used various different cables wall Chargers, I cleaned the port and I rebooted. No matter what I do, lightning never appears when I Plug and it does not load.

    If you have tried everything, then the time for you to go to the Apple store and see what the people at the Genius bar.

  • Vista - Service Pack 2 won't install and I tried everything.

    Hello

    I am new to the Forum and its nice to meet you all. I have a question about my Service Pack 2 to my Windows Vista 64 bit, not wanting to download. I tried follow these tips to make it work and I also tried to re download from different sites. I tried everything and I still get the same message every time. What can I do else? I want to play my game so bad and it makes me crazy!

    Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My laptop does not recognize my headset and I tried EVERYTHING!

    Hi guys,.

    I have a Lenovo Thinkpad X 1 of fairly new carbon, and this morning I was with a pair of headphones to have a video conference. Then later tried to use another (standard iPhone headphones) and it's as if nothing is plugged in (his fate of laptop speakers).

    I tried to restart, restore, RealTek audio to uninstall and reinstall driver but I get nothing.

    I also chose to show all disabled devices and headphones are not displayed even then.

    The headset works fine on my phone and I tried with another helmet and the same thing happens.

    I searched on the community positions but nothing.

    Help, please!

    Christian

    So I just got the phone to Lenovo technical support and it is as I expected a hardware problem, which they will fix (once the new part happens). At least, I have covered all the basics first.

    Thank you!

    Christian

  • I use firefox on a computer with Windows XP and Ubuntu, with the card-Firefox profile in a separate, partition do not have to remove the 'blocking of parent' whenever I want to use Firefox.

    I have Firefox in the Windowspartition of my computer and the Linuxpartition from my computer, I have a third partition where I store my personal data, such as my Firefox-profile-map and my download card.
    If I'm not manually delete 'Parent Lock' Firefox will not start it is already an open session.
    It would be better not to have this system of parentlock.

    It would be better to use two separate profiles for each operating system and synchronize data between the two, because there can be other problems as well with the caches that use current versions of Firefox and other files that store the paths of dependent files of the OS.

  • good so I want to uninstall firefox on my computer is a laptop and an Hp Pavilion G6!

    Well, my computer is a laptop Hp Pavilion G6

    To uninstall, go to control panel > programs and features > select Firefox, then uninstall it

  • surf to Propelleheads.se using Firefox causes the screen to go black and PC unresposive.

    My PC works fine and no problem, recently upgraded to widows 10 - no problem. All of a sudden (and oddly enough) I have this error. I need activate the new software of reason on Propellerheads.se site. The site loaded and I saw the image for about 2 seconds and then the screen went black. The music I was paying more (so I knew that Windows was still running) but the PC was insensitive - Alt.Tab, start, Control/Alt/Delete non of them worked. The Sleep button worked but when I woke up Windows screen remains black. Only has a hard reset. So I tried to access the Propellerheads.se with Microsoft Edge - it worked fine. So I uninstalled Firefox, made default client of edge and made the activation. Then reinstalled Firefox, but still the same problem. I have reset the default user agent, delete all the cookies/history etc., Firefox update, run in safe mode, disabled plugins. Yet Propellerheads.se will not load successfully. I'm not running edge - my preference is Firefox - BUT!

    Make music
    across continents and time zones, or just across town

    No problem accessing the site.

    Check this box:

    • see if there are updates for your graphics card disk drivers

    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

    https://forums.Adobe.com/message/4468493#TemporaryWorkaround

    • turn off hardware acceleration in the Flash plugin

    https://forums.Adobe.com/thread/891337
    See also:

    Start Firefox in Safe Mode {web link} by holding down the < shift >
    (Mac options)
    key and then from Firefox. Is always the problem?

  • My computer is very slow. I tried everything and bought a tune-up, but it it a little relieved.

    I went to the site of Mircosoft and he gave me an analysis of updated drivers and that being said, I had 9 out-of-date drivers. As I am not very computer would it be a good thing to buy this and update drivers. Would it fold my speed and performance?

    Hello

    Many development programs are really a waste of time and money and can cause problems.

    These methods to try to resolve the problems and methods of the driver manual update are below. Update a driver
    It's like install a program after you determine which driver you need. It is actually very easy.

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • You can help me to get the process ID so I can install updates? I am locked out and have tried to change password and opening new account, but it won't let me past the security or open a new account, because I told that I already have a. New password will

    I can't get through the process ID or change password or by opening a new account. I have only 1 e-mail address. How can I get an account that works?

    This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

    If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

    If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

    If you are still puzzled, you may need to reset the password on your Mac:

    http://support.Apple.com/kb/PH18653

    http://support.Apple.com/kb/PH14325

    http://support.Apple.com/en-us/HT201240

  • My firefox does not load and I tried everything. What should I do?

    Hi, here's the problem somehow an hour ago my firefox just stopped working, it does not load any page, all I have is a blank page and the signal that firefox loads, no errors, no nothing. I tried the steps detailed here:

    https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

    Did not work.

    Also, I thought first of all a problem of the internet, because the pages worked very well a momment and the other nothing worked, I called call support my Internet access provider and we did an uninstall of root of firefox, that didn't work either, we also checked the ports to Skype to see if the traffic was slowing down Firefox , but this isn't that.

    Can you help me?

    Thank you!

    It was very good work. Play well.
    Please report your last post as solved while others will know.

Maybe you are looking for

  • can not activate ipad?

    can not activate ipad 2?

  • Print screen does not work with DVD player

    I had a DVD created from old family movies. Now, I'm trying to capture an image using screen capture tools, but all I get is a gray image. I tried shift-3-Cmde, shift-command-4-click, enter, etc., but no luck. Here's what I come up with: While the DV

  • Question about multimedia keys on Satellite P300-23F

    I would like some information on the "enlightened ones" touch key on the top of the keyboard. What tool or application is responsible for leash work or configure. I have upgraded my laptop from Vista Home Premium, Ultimate, and had of course download

  • view lab versions

    Hello: A few days ago, I got this message: Hello: Im trying to find a way to perform a search, a file stored in different subfolders of a main folder, and copy, I mean I have a VI that makes every day a folder (the name istoday date or date of yester

  • How can I remove an entry from the configuration section?

    There is an entrance to the left of virus removal reruning does not remove it. I disabled it from starting,