Firefox closes unexpectedly (in particular on google when you type in the search field)

Similar Questions

• disable the words to guess when you type in the search window

  How to disable words to guess when you type in the search window

  https://support.Mozilla.com/en-us/KB/search+bar

  See - search suggestions at the bottom of this support article.

• How to change the address bar of search engine uses when you type in the search for something that is not Google

  I left all the Google services currently, I used Gmail, Chrome, etc... due to the recent sale of information to the Gov't and what not and even though she may or may not be true I'm sure and switched to Firefox and a different email provider. In any case so far, I like Firefox I use DuckDuckGo as my current default search and I would use as my search engine when I type a search in the address bar, by default it is Google, how can I change to a search provider I want as DuckDuckGo?

  Hello

  If you have installed DuckDuckGo on Firefox, you can follow these steps:

  1. Type of topic: config in the address bar.
  2. A warning appears, click on "I'll be careful, I promise!
  3. Type browser.search.defaultEngine in the search at the top of the page box.
  4. Double-click the item that appears.
  5. Set the value to DuckDuckGo or any search engine you want to use (the case I think).

  (I have attached a screenshot).

• How can I restore google search when you type in the address bar? or xfinity ate my search engine

  When the xfinity installed our internet guy it changed all my settings, great. now, when I type in the bar to find something I get xfinity instead of google. and their search engine is not very useful. I looked on the site of firefox so it is said, is that if you type in the address bar google is the default value. How to restore the default? Thank you all!

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  See also:

  • http://KB.mozillazine.org/Resetting_preferences
  • https://support.Mozilla.org/KB/resetting+preferences
  • https://support.Mozilla.com/kb/location+bar+search

• Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  Can be caused by an add-on to the AVG.

  When find you what is causing that, please let us know. It might help others who have this problem.

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• I have iPad 2 Air, when I type in the search bar of safari, it goes to my homescreen

  When I type in the search bar on safari, it goes to my homescreen

  Go to settings / Safari

  Disable search engine Suggestions

  Disable the Safari Suggestions

  Disable Quick Web Search site

• When you type in the e-mail, I have to press the key quote for the the@,what can be done? and is it simple?

  When you type in the email address, I have to use the key brand qoutation for the @ mark.what can I do, and how easy is it to fix?

  I suspect that the answer is simply that you have bad keyboard language implemented.
  Control Panel regional settings.

• java.lang.NullPointerException when you click on the search query

  java.lang.NullPointerException when you click on the search query:

  There is nothing my project involved code...

  at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:632)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:597)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttribute(JUCtrlValueBinding.java:1341)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$AdfAttributeDescriptor.isRequired(FacesCtrlSearchBinding.java:3018)
  at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.shouldShowInstructionText(QueryBehavior.java:66)
  at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.refreshInfoFacet(QueryBehavior.java:37)
  at oracle.adfinternal.view.faces.renderkit.rich.QueryRenderer.renderContentRow(QueryRenderer.java:718)
  at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:231)
  at
  
  

  Cvele_new_account, good point.

  Maybe you can try to remove the af: query to the page, and then drop it again.

• When you type in the selected tab, he caught another open tab is not selected, how is it fixed?

  For example:
  I have 3 open legs.
  I have selected 1 tab, I switch to tab 3 and continue typing (Log in details for example)
  When you type it out, I sign types out on the tab 1, instead of 3, sometimes I don't check and press enter (causing it to enter in table 1, which would cause me to show my password on another website)

  I switch between tabs like 3 - 4 times to set the priority.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Contacts crashes when you write in the company field

  In recent weeks, whenever I have add a new contact, or modify an existing one, contact crashes when I try to write something in the area of the company. When I paste something in this area that I had already written elsewhere, it does not crash...

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• RoboHelp Server 8 shows Blank Page when you go to the search engine

  Here's my problem.

  I have 6 projects between 2 regions on our RoboHelp Server 8.  I have

  never no problem posting to the server, our IT Department had no server, including configuration problem

  installation of Tomcat.  We have changed the port so it would go on the http default, 80 port.  Everything worked fine until this morning.  When you go to the link that is used to run in the search engine (i.e. name http://server/robohelp/serveur: ports? project prj = name & area = areaname), rather than the redirect page we get normally, get us a blank white page that shows in the status bar.  Our COMPUTER service attempted to restart the server, has not fixed the problem, they tried to restart the services (Tomcat and the RoboEngine), has not fixed the problem.  I tried to connect to the server via the RoboHelp development interface and get a connection to the server has no error. I checked the Webhelp Pro editing interface, which is what we use and all settings are correct. When I try to refresh the area get the impossible to get the list of the area of the server.  We can access projects as if what we use Webhelp.  We would use regular Webhelp but us isn't good because then there is no reporting functions because it is not executed in the search engine.

  When I'm well the Web administration Interface and you're trying to look at the section of the project that we get a server is refreshing to project data, try again later.  It's the same mistake that we received all day.  I'm now stuck and don't know what to do or try.  Between myself and my IT dept, we have tried everything we can think of.

  Just another treat so it can be excluded.  I applied the patch to my copy of RoboHelp 8.0.2 patch.  And since I am the only developer at this time, is not the issue.

  I have not tried to remove the shape of the server project, because

  has. I can't see them in the projects pane, so I can't delete them and

  b. I can not connect to the server of the re - publish.

  A Counsellor in this matter would be greatly appreciated.

  Thank you

  Ian

  Hi Ian,

  Did you change the property of "re-indexing" in your robohelp_server.properties file that I suggested to you in the email that I sent you?

  You must change the property of "re-indexing' to 'false' in the file robohelp_server.properties in the folder 'WEB - INF' in the RoboHelp Server installation folder, and then restart your server. I think that should solve your problem.

  Concerning

  Tulika.

• sites Web unwanted/requested is automatic when you click and the input field

  When I click on a field to enter a code, name, etc., or select a link specific other independent link is presented in a new tab. This happens all the time, but at least 90% of the time.

  is firefox browser by default on your system and what are these links (ads...)?

  When you try to make another browser default and unwanted links and then begin to open up to the other browser and then some kind of malware is active on your system, but it does not affect firefox in particular.

  Please run scan also of your system with various other tools such as the free version of malwarebytes, microsoft safety scanner & kaspersky security scan.

• Can I change the search engine when you type in the address bar?

  If I type a search in the address bar, I'm automatically transferred to google. It can be changed or am I stuck with google? I know that I can select one top-right. Thank you.

  Update try to search with the keyword see my post under

  Hi msgtedret,
  
  I thought you had solved this problem with the above post at alco

  • See also http://kb.mozillazine.org/Keyword.URL
  • And http://kb.mozillazine.org/Resetting_preferences
  • Other useful items
    • Search the Web from the address bar
    • Use the search bar in Firefox
    • Remove a toolbar that has supported your Firefox or the homepage search
    • https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  Everyone
  
  If anyone else has problems, it is best to start your own thread using/issues/new, but you can find the solution by following the advice and the links given in this thread that you are reading now. (Scroll to the top of the page.)

• IE 8 on Windows XP: Favorites do not appear when you type in the address bar.

  System:

  -Windows XP Pro

  -Version: 2002

  -SP 3

  IE 8:

  Version: 8.0.6001.18702CO

  I can't my favorites appear in the address bar when I type in.  I have removed/disabled all the parameters 'InPrivate', my 'Securty level for this zone"is set to"Low ".  I "restored the advanced settings.  I deleted all cookies, temporary files, history, etc.  Also, I tried to update my registry and that does not work either.  I reinstalled IE8 and it does not work.  I also ran a 'fix' and who does not.

  Can anyone provide a viable solution?  Also, please don't refer to another thread.  Just put the answer in this thread.  It would be much appreciated.

  My only thought is to reset Internet Explorer...

  Tools. Internet Options > Advanced tab > reset > reset Internet Explorer settings > click on Reset

  IE close and reopen, and see what happens.

  My last thought would be have you started something new installed on your computer for this?

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.