Firefox worked before 11 update, now no longer loads pages (content encoding error) or not load at all.

Similar Questions

• AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Firefox 23.0.1, update is no longer automatically highlights the contents of address bar when I open a new tab.

  The foregoing. When I opened a new tab in the past, before the new update, firefox would automatically highlight the text in the address bar, and I couldn't just start typing here the address of the site that I wanted to. I could quickly get anywhere I want in less than a second. Now, I need to drag, and then click on in the bar every time to address. I installed an add-on called "custom newtab", but it slows down just me lower due to a lag between opening a new tab and the add-on kick and highlighting the contents of address bar.
  What is happening is this:
  Click "new tab".
  New tab opens blank, and the text appears highlighted "google.co.uk" for about a quarter second.
  Loading the Google page and highlight the text becomes not for another second quarter.
  The module comes in and highlights the text "google.co.uk" Meanwhile I have already started typing and end up losing the first part of words, sending me random web pages and research.

  Why this change? Difficulty please!

  Hi ChrisYeomans, a change has been noted in other threads on google.co.uk

  The http URL now automatically redirects to https. Since you did not specify the Protocol in your newtab.url setting, Firefox attempts http and it is immediately redirected to the https domain. You should be able to see this happen unless your computer is much faster than mine.

  Firefox does not handle this redirect elegantly - the URL in the address bar is not enabled unless you click a different tab, and then click back.

  To work around the problem, update your newtab.url to the URL https://www.google.co.uk/ full

• Update ff27. I have d/l supposed to go to the key, worked fine until update, now they go to windows default download folder, everything is always set to fl

  downloads are unaware of the setting options. has worked before update 27

  I was able to switch d/l Bishop in windows to ask every time, that seems to work

• Why dllhost.exe crashes when trying to create thumbnails for video files 3D it was working before the update to Internet Explorer 10

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  Why does dllhost.exe Com surrogate consumes memory until the crash.

  This happens when I highlight or view a folder containing video files, even if I close the file or select another folder, that maintains the memory consuming.

  It seems to happen more often with the 3D video files, but it has done the same with the 2D files.

  It therefore seems to be a problem with the windows thumb nails system on these files.

  Besides trying to delete or move the file or folder, while the Com Surrogate consumes memory Delete cannot complete the task.

  What I did is to find by selecting delete file in question, then go to Task Manager stopping Com Surrogate, then deletes the file.

  OK guys and girls, here is the scoop or what I discovered.

  Went to paid Support MS started a ticket gave them the info of the problem.

  I backed up before you have to pay, but it will still leave a ticket on the system req.

  Them I did a searck masive on this problem and ran into this and I beleve it's true. It's the way they handled a similar problem in Vista.

  So here it is.

  "MS are aware of the problems with certain chipset / combinations ofdriver with the updated KB2670838.
  They also have problems with the installation of IE10

  They work on these two issues and will be updated as and when they are convinced that they have solved the problems.
  In the meantime, the recommendation is that if the update isn't the first phase of installation, make sure that it is uninstalled and then hide it - Windows Update will display it when it is updated. »

  To uninstall IE10 and KB2670838 update, should be fixed hide automatic update when your pop back up to be updated the problem.

  Evidence that MS knows that IE10 has problems on some hardware platforms is here.

  http://TechNet.Microsoft.com/en-us/IE/jj898509.aspx

  Hope this helps Every One.

• I've just updated for Firefox 6.0.2 and now two fingers to scroll on my touchpad does not work.

  It's a Smartpad MOMENTUM 2.2, with up-to-date drivers.

  Type of topic: config in the address bar and press ENTER key. When you see a warning, click on I'll be careful, I promise! button

  -> In the filter bar, type trackpoint

  • Right-click ui.trackpoint_hack.enabled preference, click Edit and change the value of -1 to 1
  • Click OK

  -> Close Subject: config tab

  • Closing of Firefox (click the Firefox button and click exit)

  Now you should be able to scroll using Trackpoint button and central of the mouse on the Trackpad again.

  Check and tell if its working.

• after firefox updated the last time, adobe as well updated, now when some loading sites, I have a program needs you permission to continue which is Adobe DLM. What's up with that and how do I stop?

  The problem started when firefox updated at startup. This screen is what vista puts whenever you are about to load something again. I have already installed the adobe update twice and it continues.

  The Adobe DLM is not required for Adobe products to work. You can uninstall it open the control panel and select Add / Remove programs. In the list of programs, select Adobe DLM (may be listed as Adobe Download Manager) and click on delete.

• Works since ff update is no longer the theme of ff B 20 worm.

  When load FF 20 FF theme B on larger books. It is turned on and still does not work.

  I was told to turn off private browsing, and it solved my problem. The theme works fine now.

  Thanks for the help.

  You are welcome

• Is abandoned on windows 10 - was a lot of work before Microsoft update system for Windows 10

  After the update to windows 10, photoshop is abandoned.

  Adobe Photoshop CC 2015 has stopped working

  then the program closes

  Dave

  Have you guys tried a complete uninstall/reinstall of Photoshop itself again? It is not out of the realm of possibility that something happened during the upgrade to Windows 10. (I had no problem with the CC apps myself, but I had problems with other applications).

• CS5 and GTX285 worked, run Adobe updated, now it does not work... why?

  So I bought a Gigabyte GTX285, installed in my 3DBOXX, and everything was great (still had CS4). Yesterday, I bought and downloaded Master CS5 Collection. Everything went very well - I opened the first, ran some stuff has been really impressed with the speed increases and loved it. However, I noticed that my support for a RED film was not yet where it should have been (has not supported the new color RED, like CS4 space... a problem that had told me would be fixed in CS5 since it had supported native RED and does not need obsolete plugins red) made on a hunch, I ran the update from Adobe and discovered that my download was 5.0. He ran the update to 5.0.2 (or what is later) and after the update was done, I started first and immediately got a warning message saying that I didn't have a card active CUDA CUDA effects would not be available, and that I need to install the latest drivers for my video card. Well, I went on the Gigabyte site, downloaded the latest drivers for my card, installed and restarted. Still get the same message when I load up to the first.

  For what it's worth, I already had the latest video card drivers installed during my first install of CS5 and download and the update I did after spending the first message was simply a replacement of the drivers with the same.

  Anyone have any suggestions on how to solve this problem and get the most out of my system? I convinced my bosses to buy CS5 and the GTX285 specifically for improving the performance, so if I can't do this job, they won't be happy!

  Thank you!

  What driver version are you running? See if the NVIDIA site has newer drivers available then Gigabyte offers.

• I've just updated my Firefox, but with this update, one of my toolbars that I really want, is not compatible. Is it possible to 'come back' and get the previous Firefox so I can put my tool bar back?

  The toolbar is the Norton 360 toolbar. I know that this does not affect the protection, we love just to be there and I would rather not the update of Firefox to not have this toolbar!

  A Norton for Firefox 7.0 compatibility fix is available from 27/09/2011.
  
  http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-7-0-compatibility-patch-is-now-available/TD-p/547384

• HP LaserJet P1102w worked very well and now just print 1st page of multi-page documents

  Hi, I used my printer for more than 6 months.

  Last month, has had the problem for a couple of days, then he went suddenly (yahoo, I thought).

  Has started again last night when printing pdf documents, it only prints the first page and then it seems stuck on page 2 (52% complete transfer appears on the windows printer).  For word, it seems to just take forever to print other pages...

  Running on a Mac OX X Yosemite.  Printer is connected with a wire (I was never able to complete the wireless connection and got too busy to spend more time understanding...).

  Tried to turn off my computer and then restarting him.  Also stop the printer and restarted.

  Thanks in advance,

  M

  Hi @MartineRB ,

  I see you are having problems printing multi-page documents. I would like to help.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Try to print again.

  If you are able to print now by the USB connection and want to set up the printer on the wireless network, take a look at the following:

  Restore the default settings of the printer.

  Turn the printer off, press and hold the wireless button and the Cancel (x button) button while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Printing a Configuration Page. Select the method two.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open if it is not.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps instead of the video.

  You must connect the USB cable from the printer to the computer to install the printer as a USB device first and then to configure the wireless network.

  Turn on the printer, connect the USB cable and install the update from Apple that should load automatically.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Status make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear) Make sure that the printer is listed beside the use: displays the name of the correct printer and not the driver by default, and then click the Add button.

  Remove the USB printer in the list of printers and Scanners window.

  Unplug the USB cable.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• Hi laptop work on had vista now it says biuld7601 this copy of windows 7 not genuine

  laptop is not geniine

  Hello

  I suggest to download Windows Validation components and check if your version of Windows installed on the laptop is authentic or not.

  Download Validation of required Windows components

  http://www.Microsoft.com/genuine/validate/DownloadValidationSupport.aspx?displaylang=en

  Note:

  Use Internet Explorer to download these components as other Web browsers may not support this download.

  You can also check the State of Activation of Windows.

  Reference:

  Activating Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

• Failure of the update of the form of the IOM process | Error: Could not execute database read

  Hello

  I encounter the following error when I try to create a new version for a form of OIM Design Console process:

  Description: Could not run the database to read. The database has encountered a problem with the specified SQL query. Solution: Check the database query. Contact your system administrator.

  It does not matter that I use xelsysadm or any system administrator account.

  Details of the environment:

  OIM 11g Release 2 (11.1.2.1.0)

  
  

  
  

  Errors in the logs: (despite following errors I can update IOM DB Tables with SQL through SQL Developer queries)

  
  

  "Class/method: DBPoolManager/getConnection/Exception a few problems: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection"

  
  

  Class/method: DBPoolManager/getConnection/Exception encounter a few problems: error connecting to database recovery. Please check the following

  
  

  Class/method: tcDataBase/writeStatement encounter a few problems: ORA-01407: cannot update ("PRD01_OIM". » « « « SDK ». » SDK_SCHEMA') with the NULL value

  
  

  Class/method: tcTableDataObj/updateImplementation a few problems: {1}

  
  

  Class/method: tcDataBase/rollbackTransaction encounter a few problems: Rollback performed

  
  

  Class/method: tcDataObj/save error: wrong to save SQL operation

  
  

  Please let me know if you have any suggestions.

  
  

  Thank you.
  

  
  

  I found the solution!

  I was going through this blog: OIM 11 g: error after startup server IOM: retrieve the connection at the base

  In the last comment by Amit, he mentioned that the settings IOM - config.xml must be changed.

  So I discovered that IOM-config file. XML from my environment, under directDBConfigParams, url (jdbc thin driver) was wrong because of cloning.

  In addition, OIMFrontEndURL, RMI and SOAP URL were wrong.

  I corrected the and guess what... each utility works...

  However, you don't have to import/export the config of MDS file... you can change these details in the following MBEANs

  1 DirectDB

  2. the discovery

  3 SOAConfig

  > Reboot the server of the IOM.

  I knew this jdbc driver was not, but did not know where to set it up.

  I have listed the error in my last comment, so that if anyone has this problem, the text of this presentation would help.

  Thank you.

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?