Firewall failover as a stand-alone box

Similar Questions

• Stand-alone configuration SX20

  Hello people,

  I'm trying to confugure a SX20 as a stand-alone box, which means that this SX20 will be registered in a CUCM or VCS. I just set up an IP address and get on h323 as static and live mode. However the H323 seems to be inactive. When I try to call to a Polycom, we can make the call. In the diagnostic tool. The diagnostic tool shows the following warning:

  WARNING: Default call Protocol

  The default call protocol is set to H323, but the system is not registered on this Protocol. The system isn't able to make all the calls. Please eitherchange the default call Protocol, verify that Protocol is enabled, or check the configuration H323..
  Could you please help me...
  Thank you!

  Hi Jorge,.

  You can ignore this message because this will show if your devie is not registered on any guard for H323.

  as you use to direct IP to IP call, you h323 is inactive and it will show the above error.

  climbing, you can ignore this message.

• Firewall high availability cisco asa can be divided into stand-alone license

  I have two ASA5545-X with HA/active license and now my client has changed the designated and wants to divide these into stand-alone firewall.  How will this affect the license?  Y at - it no problem with that, or they will be able to run just fine as standalone firewall?

  Thank you

  Howard

  Hello

  To my knowledge if the client has obtained the ASA5545-x firewall initially with identical licenses it should be no problem using them separately.

  Because your customer is currently using Active/active failover, this already means that firewalls are in multiple context mode. In turn, this means that he or she was not able to use all the VPN features licensed on the ASA pair and therefore received no VPN license on each unit.

  So it seems to me that, given the information you have so much that there should be no problem using the firewall separately.

  The single license related thing I can think of at the moment, it is that if you want to keep them in multiple context mode and only acquired license of security context for the other.

  -Jouni

• Change IOS on AP 1131AG light to stand alone

  Hi experts,

  can anyone advice if the ap 1131ag IOS can be changed to stand alone? can you give me a link where I could get a standalone IOS and how? Thank you!

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 set the timeout on the TFTP server in 30 seconds.

  Step 4 on the PC where, the TFTP server perform the following steps:

  a. disable the firewall, such as Windows, ZoneAlarm firewall firewall software, McAffee firewall or other.

  b. ensure that all Windows are visible. In Windows Explorer, click Tools > Folder Options > view. Deselect hide them extensions of known file types check box.

  Step 5, rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point, c1130-k9w7 - tar.default for a series of 1130 access point, c1240-k9w7 - tar.default for a 1240 series access point and c1250-k9w7 - tar.default for a 1250 series access point.

  Step 6 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 7 disconnect the power to the access point.

  Step 8 push the MODE button and hold the button while you reconnect power to the access point.

  Step 9 hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), then release.

  Step 10 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 11 after the access point reboots, reconfigure using the GUI or the CLI.

• How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

  If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

  Open options
  Tabs
  Top box uncheck the box which

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• cRIO stand alone running

  Hello world

  I am beginner in LabVIEW and LabVIEW FPGA and RT. student internship that I work this month on FPGA project and my goal is to schedule a stand-alone on cRIO application.

  I got a CompactRIO 9002 with an AIO 9215 analog input module and use LabVIEW 13. This cRIO Gets an ethernet and a RS323 port.

  My request is to:-code FPGA by ethernet

  -acquire a signal input of the NI 9215 module

  -Send the data measured on a device (first on hyperterminal on PC and on an SD card or a storage device) by the port COM (RS232)

  My development was to: 1. create a new FPGA project

  2 code for the target FPGA vi and compile (InOut.vi)

  3 code another vi to run the cRIO from my computer (OpenCloseFPGA)

  At this stage, everything goes well and works and I followed the signal measured on OpenCloseFPGA.vi and my Pc Hyperterminal.

  Can I track this topic 'http://zone.ni.com/reference/en-XX/help/370622L-01/lvrthowto/rt_building_rt_app/' on the creation and deployment of a stand-alone application in real time. But my RT generated and deployed application nothing happens. I followed other tutorials on standalone RT but I still stuck...

  Could someone give me any tips or tutorials to help me?

  I found the solution, there is a mismatch and a mistake in my project.

  First, I use a cRIO 9002 and in building'step to unplugging it SSE2 option in "Advanced dialog box.

  See this topic.

  The second was a mistake from myself, I give an ethernet address to RT host that cannot run in a standalone application (wireless).

  Thank you for all your help.

• Initially, opening an application stand alone not in run mode.

  When you open an application stand alone for the first time, how can I automatically start in run mode?  I want the user to click on the white arrow to start the program.  Are there ways to get around this?  Thank you!!

  Yes.  Here's how:

  When you build your executable file, there are several screens in which you set parameters.

  Under "The Source file settings", check "VI Set of properties for all contained items.

  Click on the button "customize the properties of VI.  Another dialog box appears that lists the properties of the VI.

  Under 'Performance', uncheck the box "use the VI property.

  Make sure that ' Run when opened ' is not checked.

  Now, when you build your executable file, your user will have to press the white arrow to start the VI.

  Hope this helps,

  d

• Flexconnect AP stuck in stand-alone Mode

  Hi all

  I have all my APs configured under flexconnect at the remote site.

  I have one controller at the head office.

  There are two redundant links of MPLS from the main office to the remote site.

  Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.

  I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .

  But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).

  Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!

  There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.

  If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.

  HTH

  Rasika

• stand-alone server from acs 2008 available software?

  I use acs 4.2 on a windows 2003 server sp2 in my current network. The network has been replaced and I'm a software/windows 2008 Server and build the application. I'm a bit confused as too the available software. The acs software only 5.4 I see is for the appliance and vmware. Is this software available for stand-alone servers is not end of life?  Or can I use acs 4.2 on the stand-alone server and update all the way to 5.4. I think they would have a base at one of the levels 5.x package... Any information would be appreciated

  Hello

  I would like to inform you about the following things:

  1 ACS 5.x cannot be installed on the server of widnows as ACS 4.x

  2 ACS 5.x cannot be installed on the vmware (Linux-based) or as a device.

  3 ACS 4.x is a box of windows-based and ACS 5.x is a device based on linux/VMware

  4. you can configure vmware or a device such as a stand alone ACS5.x box.

  5 ACS 4.2.1.15 is available up to now and is still not end of life.

  6. you can upgrade the ACS 4.2.0.124 to 4.2.1.15, however it is not compatible with windows 2008 r2 box.

  7. you is impossible to pass the ACS ACS 5.4 4.2, you can buy seprate for ACS 5.4 license and then you can migrate the database from 4.2 to 5.4

  Concerning

  Mohammed (useful rate of messages)

• How to create multiple user login on the stand-alone machine on Windows 7 Professional

  Dear all,

  I want to implement multiple user login on the stand-alone machine of Windows 7 Professional (there is no working group or active directory).
  There are 20 users in different positions.
  I want to create each logon with different password and set user policies.
  If I create so many users there will be number of boxes. So, I want the user to type their name and the password and login.
  Please help me if I can do it, and if the issue is not clear, let me know so that I can help what I want.
  Thank you
  Gregory Mhatre

  I have not tried (not had W7 pro), but this is the info you wanted? - http://social.technet.microsoft.com/Forums/windows/en-US/d42b07fa-530f-442a-9340-7f892e22a3be/change-login-prompt

  As I say, cannot try, just found by a search. Hope that I have not misunderstood.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Configuration of the Cisco etherchannel stack: flag stuck in stand alone

  I'm putting in place an etherchannel for my stack of Cisco (switch Catalyst 3750 G x 2), with a port on each switch the etherchannel. The example of battery cross http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml using as a guide, I created my channel. However when I discovered "show etherchannel summary 6 ' it says that both my ports are stand-alone, when I want them to be in port channel grouped in. Thank you in advance for your help, I added all the information I could think.

  Here is how I created the etherchannel

  sailing-sw-1 #conf t

  sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

  active in sail-sw-1(config-if) mode #channel-group 6

  sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

  sailing-sw-1(config-if) #switchport mode trunk

  sailing-sw-1(config-if) #exit

  sailing-sw-1 (config) #interface gigabiteethernet 0/1/10

  active in sail-sw-1(config-if) mode #channel-group 6

  sailing-sw-1(config-if) #switchport trunk encapsulation dot1q

  sailing-sw-1(config-if) #switchport mode trunk

  sailing-sw-1(config-if) #exit

  sailing-sw-1 (config) #exit

  The running-config

  sailing-sw-1 #show running-config

  Building configuration...

  Current configuration: 5390 bytes

  !

  version 12.2

  no service button

  horodateurs service debug uptime

  Log service timestamps uptime

  no password encryption service

  !

  sailing-sw-1 hostname

  !

  boot-start-marker

  boot-end-marker

  !

  Select the 5 secret...

  !

  !

  !

  high-level description of the cisco-global macro

  No aaa new-model

  1 supply ws-c3750g-24ts switch

  2 available ws-c3750g-24ts switch

  mtu 1500 routing system

  Uni-directional aggressive

  !

  !

  !

  MLS qos map cos-dscp 0 8 16 24 32 46 46 56

  !

  Crypto pki trustpoint TP-self-signed-538118016

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 538118016

  revocation checking no

  rsakeypair TP-self-signed-538118016

  !

  !

  TP-self-signed-538118016 crypto pki certificate chain

  certificate self-signed 01

  30...

  AF

  quit smoking

  !

  !

  !

  errdisable recovery cause link-flap

  60 errdisable recovery interval

  port-channel - the balance of the load src-dst-mac

  !

  spanning tree mode rapid pvst

  spanning tree default loopguard

  No spanning tree optimize transmission of bpdus

  spanning tree extend id-system

  !

  internal allocation policy of VLAN ascendant

  !

  !

  !

  Interface Port-channel6

  !

  GigabitEthernet1/0/1 interface

  No auto mdix

  !

  interface GigabitEthernet1/0/2

  No auto mdix

  !

  interface GigabitEthernet1/0/3

  No auto mdix

  !

  interface GigabitEthernet1/0/4

  No auto mdix

  !

  interface GigabitEthernet1/0/5

  No auto mdix

  !

  interface GigabitEthernet1/0/6

  !

  interface GigabitEthernet1/0/7

  No auto mdix

  !

  interface GigabitEthernet1/0/8

  No auto mdix

  !

  interface GigabitEthernet1/0/9

  No auto mdix

  !

  interface GigabitEthernet1/0/10

  switchport trunk encapsulation dot1q

  switchport mode trunk

  No auto mdix

  active in mode channel-group 6

  !

  interface GigabitEthernet1/0/11

  No auto mdix

  !

  interface GigabitEthernet1/0/12

  No auto mdix

  !

  interface GigabitEthernet1/0/13

  No auto mdix

  !

  interface GigabitEthernet1/0/14

  No auto mdix

  !

  interface GigabitEthernet1/0/15

  No auto mdix

  !

  interface GigabitEthernet1/0/16

  No auto mdix

  !

  interface GigabitEthernet1/0/17

  No auto mdix

  !

  interface GigabitEthernet1/0/18

  No auto mdix

  !

  interface GigabitEthernet1/0/19

  No auto mdix

  !

  interface GigabitEthernet1/0/20

  No auto mdix

  !

  interface GigabitEthernet1/0/21

  No auto mdix

  !

  interface GigabitEthernet1/0/22

  No auto mdix

  !

  interface GigabitEthernet1/0/23

  No auto mdix

  !

  interface GigabitEthernet1/0/24

  No auto mdix

  !

  interface GigabitEthernet1/0/25

  !

  interface GigabitEthernet1/0/26

  !

  interface GigabitEthernet1/0/27

  !

  interface GigabitEthernet1/0/28

  !

  GigabitEthernet2/0/1 interface

  No auto mdix

  !

  interface GigabitEthernet2/0/2

  No auto mdix

  !

  interface GigabitEthernet2/0/3

  No auto mdix

  !

  interface GigabitEthernet2/0/4

  No auto mdix

  !

  interface GigabitEthernet2/0/5

  No auto mdix

  !

  interface GigabitEthernet2/0/6

  !

  interface GigabitEthernet2/0/7

  No auto mdix

  !

  interface GigabitEthernet2/0/8

  No auto mdix

  !

  interface GigabitEthernet2/0/9

  No auto mdix

  !

  interface GigabitEthernet2/0/10

  switchport trunk encapsulation dot1q

  switchport mode trunk

  No auto mdix

  active in mode channel-group 6

  !

  interface GigabitEthernet2/0/11

  No auto mdix

  !

  interface GigabitEthernet2/0/12

  No auto mdix

  !

  interface GigabitEthernet2/0/13

  No auto mdix

  !

  interface GigabitEthernet2/0/14

  No auto mdix

  !

  interface GigabitEthernet2/0/15

  No auto mdix

  !

  interface GigabitEthernet2/0/16

  No auto mdix

  !

  interface GigabitEthernet2/0/17

  No auto mdix

  !

  interface GigabitEthernet2/0/18

  No auto mdix

  !

  interface GigabitEthernet2/0/19

  No auto mdix

  !

  interface GigabitEthernet2/0/20

  No auto mdix

  !

  interface GigabitEthernet2/0/21

  No auto mdix

  !

  interface GigabitEthernet2/0/22

  No auto mdix

  !

  interface GigabitEthernet2/0/23

  No auto mdix

  !

  interface GigabitEthernet2/0/24

  No auto mdix

  !

  interface GigabitEthernet2/0/25

  !

  interface GigabitEthernet2/0/26

  !

  interface GigabitEthernet2/0/27

  !

  interface GigabitEthernet2/0/28

  !

  interface Vlan1

  the IP 192.168.0.1 255.255.255.0

  !

  default IP gateway - 192.168.76.102

  IP classless

  IP http server

  IP http secure server

  !

  activate the IP sla response alerts

  !

  !

  Line con 0

  line vty 0 4

  password Mil19

  opening of session

  line vty 5 15

  password Mil19

  opening of session

  !

  end

  Interface port-channel 6

  (in the example, there should be this line "identified in this channel: Gi2/article-gi1/0/10 0 / 10 ')

  
  

  sailing-sw-1 #show interfaces port-channel 6

  Channel6 port is down, line protocol is down (notconnect)

  Material is EtherChannel, address is 0000.0000.0000 (bia 0000.0000.0000)

  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Link auto-duplex type, automatic speed is automatic, media type is unknown

  input stream control is turned off, output flow control is not supported

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry, never, never hang output

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  0 packets input, 0 bytes, 0 no buffer

  Received 0 emissions (0 multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  Watchdog 0, multicast 0, break 0 comments

  entry packets 0 with condition of dribble detected

  exit 0 packets, 0 bytes, 0 underruns

  0 output errors, 0 collisions, 1 interface resets

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 output BREAK

  output buffer, the output buffers 0 permuted 0 failures

  EtherChannel 6 Summary

  sailing-sw-1 #show etherchannel 6 Summary

  Flags: - Low P - D bundled in port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied

  u - unfit to tied selling

  w waiting to be aggregated

  d default port

  Number of channels: 1

  Number of aggregators: 1

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-----------------------------------------------

  6 Po6 (SD) LACP Gi1/0/10 (I) Gi2/0/10 (I)

  Hello

  It seems that the grouping of NIC Linux box does not work properly. Please

  Check on the side of Linux.

  Kind regards

  NT

• Services that can be disabled - Windows 7 stand-alone, single user of public access to the internet through AT & T wireless router.

  I'm trying to "understand :-)." "How to secure my laptop, a single user stand alone - not connected to any local network where obtaining internet access SECURE in my only goal.  I never SHARE with any other computer and want to disable ALL unnecessary services - what services can I disable in Windows 7 and with the Windows Firewall work with AT & T Internet Security Suite McAfee I entered and disabled all connections through the Windows Firewall to the internet PUBLIC - as I assume that the firewall 'rules' will block all malicious attacks - knowing that it is NEVER safe to assume something where I just enough conscience to accept the fact that I then know near NOTHING scares me.  Thanks - I'm trying to educate myself and the fear that Windows 7 will be obsolete before I have achieve this noble goal :-) - and then the nightmare should be repeated on a new version of Windows. Laughing out loud

  Hello

  I suggest you to visit these links for information on how to protect your computer.

  Consult the safety and Security Center Web site. You have a section to browse number that explains on the safety and security.

  http://www.Microsoft.com/security/default.aspx

  You can see the sections:
  http://www.Microsoft.com/security/PC-security/default.aspx#safety-products-and-scans

  http://www.Microsoft.com/security/online-privacy/default.aspx#passwords

  http://www.Microsoft.com/security/family-safety/default.aspx#overview

  http://www.Microsoft.com/security/resources/default.aspx#free-materials

  With regard to the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  http://TechNet.Microsoft.com/en-us/library/cc755604 (v = ws.10) .aspx

  Hope the information is useful.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian