Firewall must be enabled.

Similar Questions

• Vista security question: my Windows Firewall must be on? The McAfee Firewall is enabled

  I have Vista Home Premium. I got to enter the Dell support center. "I think this is the first time that I did. It showed that I have Windows Defender on, but not the Windows Firewall and it does not show that I have McAfee Sequrity Version 9.15. My question is #1. My Windows Firewall must be on? The McAfee Firewall is enabled. #2 Why do the McAfee security information appear in the General Info tab or the Security tab I'm sorry if this is such a fundamental issue that I know enough about computers to be dangerous.

  Thanks for any help in advance.

  I don't know why McAfee is not in the Security Center.

  I can only answer to your question n ° 1... to omit the Windows Firewall. McAffe has its own firewall. If you expand the firewall section of the Security Center, you can see this note:

  Two or more firewalls at the same time may conflict with each other.

  t-4-2

• My Bank States cookies must be enabled. They are, but not access. Used to work 6 months ago.

  This happened with a recent update; It worked before, but now, no password is registered and I can not access my Bank (sitehttps://www.labanquepostale.com/particulier.html indicates that cookies must be enabled to access the customer area), and Statcounter requires also that daily entry of the password.

  Two sites work correctly on IE11 (I use windows 10 - don't like Edge!)

  Don't follow not, and follow-up care are checked. Custom settings - cookies - accept the 3rd part of visit - don't forget not check passwords.

  Have you tried to use the site with basting disabled protection?

• protection technology of identification made by intel plug-in must be enabled

  "" this plugin came with my mozilla browser in "to activate the mode" must be enabled or not.

  Firefox detects a lot of plugins that is preinstalled on your system...

  Intel claims the identity Protection technology as helping to prevent identity theft by allowing Web sites to identify your computer, which can limit access to other computers if someone learns your username and password:

  http://IPT.Intel.com/home/how-it-works/identity-theft-protection

  Good, but I don't know that many websites use this feature. Is it really useful or they just go to Plan B, as texting you a code?

  If you find a site asking to use the plugin, you would like it to be a website you trust since this identifier doesn't know anything about the integrated Firefox Privacy features (clearing cookies, private browsing, etc.). For this reason, I don't think that "Always enable" is a good idea.

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• I activated my cookies according to help information, but still some sites say cookies must be enabled to access or log-off

  I put the parameters of confidentiality to enable cookies. When I try to access certain sites it says 'Cookies must be enabled' and when I try to sign out of Hotmail, he said "we couldn't sign because your browser is blocking cookies. To sign out, close all browser windows. "

  Any ideas?

  In some cases, security modules (for example, NoScript) or suites of security software will affect the way Firefox handles cookies. You can check the "Privacy" settings in your security software to see if it might block cookies.

• Windows Firewall is not enabled...!

  Windows firewall in not enabled.

  I want to update my windows store application but a message that windows firewall is not enabled.when I guess the do, it dosent happen.

  a mistake is diplays i.e. 0 x 80070422

  This is something serious because I want to upgade windows 8 to 8.1.so please help!

  are the specifications of my laptop;

  Core i5 3210 m 2.5 gz

  6 GB of ddr3 ram

  hard drive 750

  OS 64-bit of Windows 8

  internet connection broadband.

  Hello

  Thanks for the update.

  -Download, install, update FREE Malwarebytes Anti-Malware'

  http://www.Malwarebytes.org/MWB-download/

  (do not install a Pro version or trial)

  -Perform a quick scan and see if something is detected - clean infections.

  Finally, follow the instructions in this article MS-> http://support.microsoft.com/kb/2519899/en-us

  Click on the thumb of white LAURELS (left). This way you'll testify for advice or help you have received.  If your problem has been resolved - click on the appropriate button and accept the solution. ***

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• Cannot connect to internet after start - found that the firewall is not enabled

  Original title: when the pc is turned on, unable to connect to the internet, found the firewall is not turned on. After repeated clicks, it finally works

  When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

  When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

  It's just a detailed view...

  I suggest some standard maintenance and cleaning which will generally help as you allow to get acquainted with your machine so that you can restrict the possibilities...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Windows XP is stuck in a loop, saying it must be enabled. I never have the wizard or it never activates.

  Activation problem

  I had to 'fix' a WinXP installation. Now I'm stuck in a loop, saying it must be enabled. I never have the wizard or it never activates. What should I do?

  It is same in 'safe mode' (I think that CTRL + ALT + DELETE)? Can you try to connect as administrator account (this account must be in "safe mode" and his name is administrator)

  If it the same - next you can try - press F8 during boot and in the menu select ' last good known Configuration":

  http://support.Microsoft.com/kb/307852/en

  LC

• DEFENDER lights. He tells me it's off and it must be enabled. I tried several times and I can't activate it. I see the icon in my field of security. The ICON in my programs (install/remove) is NOT there? ERROR message 0x80071A90__

  I would be grateful with the help of an EXPERT.  I would be very grateful if you can help me.

  DEFENDER lights.  He tells me it's off and it must be enabled.  I tried several times and I can't activate it.  I see the DEFENDER icon (it looks like gray Castle) in my field of security.  The ICON in my programs (install/remove) is NOT there?  0x80071A90 error message
  98CB24AD-52FB-DB5F-A-15-C8B3B9AIE18E

  In ADDITION, 2nd edition: I have an infected memory stick digital camera.  It has infected my computer 4 times from AUGUST 2009 I realized that it was the culprit.  It leads to the DEATH of SCREEN BULE.  He arrived Friday.  I made the recovery of the system.  I REINSTALLED it.  QUESTIONS: What should I do with this memory stick?  Throw it in the trash?  I lost 6 months of precious photos.  Can I move photos or keep the photos?  What do you recommend?

  In ADDITION, through the memory stick infect my computer and then the PICTURES who made the infection.  About 3 or 4 flash drives have been put in my computer.  Are they all infected?  I have College CRITICISM of work on one that I can't lose.  What should I do?  Should these flash drives be CLEANED of INFECTION?  They CLEAN themselves without losing me my files stored?  What do you recommend?  I need someone to assess whether or not they are infected?

  The infected memory stick infects my digital camera?  And my Photosmart HP ALL IN ONE printer?  Are they ALSO infected?  Will be going to infect my computer.

  I do not think that the SECURITY SOFTWARE I have: (free from Comcast) Norton and Microsoft Security Essentials, are fighting the infection from the memory stick.  It would be good to have an EXPERT evaluate the memory stick and tell me what they think.  As well as my flash drives, an expert must evaluate and tell me if 3 flash drives are infected? And they are clean? And the files that I have on them can be saved?

  I hope you can help me, THANK YOU, WG

  First, you have to run two anti-virus programs.  This is NOT recommended.

  Second... you state one of them is Microsoft Security Essentials.  If this is the case, you can't turn on Windows Defender because MSE already made defender and stops automatically Defender because it is no longer necessary.

  Difficulty of these 2 things and your problem should be solved.

• I have a laptop and he says: my WiFi is disabled and must be enabled. I have no idea how to proceed.

  I have a laptop and he says: my WiFi is disabled and must be enabled.  I have no idea how to proceed.  Not very computer savy.

  Consult the manual where there is a diagram of the buttons and ports on the computer and there should be a switch that you toggle or a function key, you need to press to activate / disable the WiFi features.  It will depend on the model, in order to check the manual.

  Steve

• SHH must be enabled?

  Hello

  SSH must be enabled or not in the virtual host machine?

  Or just let him if necessary?

  Thank you

  two ways to check it.

  (1) DCUI-> Troubleshooting Options

  (2) connection directly in your ESXi host using vSphere client and go to Configuration-> security profile. (as long as your host do not have active locking mode)

• Customer is not able to join WebConf - error message cache must be enabled

  Client with 1.7u45 jre installed was not able to join WebConf today

  customer receives an error

  Unable to launch the application

  cache must be enabled for nativelib or installer-desc support

  Another College for this customer in the same office a Basel connect - so issue that happens on specific PC,

  but I was not able to load the client, the settings must be set

  How can I add screenshots?

  I have two showing the customer error

  -screen_01_WebConf_Connect_trouble. PNG

  -screen_02_WebConf_Connect_trouble. PNG

  -Thank you

  Edith

  Hello

  It looks like it may be duplicated if the following changes are made:

  Disable Java Caching.  Control Panel->Java.  On the General tab, Temporary Internet Files pane, select Settings and untick the 'Keep temporary files on my computer' option.  Clear the Java cache
  

  So to reverse the process - go to the Java application on the Control Panel, select settings osteonecrosis of the general part of temporary Internet files, then check "keep temporary files on my computer". This should hopefully solve the problem.

  Phil

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve