Firewall settings Windows to ensure foreigners on the network cannot access the files on the PC

Similar Questions

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• My firewall of Windows 7 will not take the updates more

  How do update you my Windows Firewall that stopped taking updates?  Sound not to get your updates.  How can I solve this problem?

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  The Windows Firewall doesn't in any way requires any maintenance feature.

  If you are referring to Windows Update.

  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• PC Windows 7 and Vista Home Premium computer network cannot access each other

  I have an a Premimum Vista computer with a USB printer on a network with a Windows 7 Ultimate Computer.  Both recognize each other both are visible in the network on both computers) but I can not access one or the other.  Message on window 7 says "your computer seems to be correctly configured but the resource does not."
  "Any suggestions?  I need to produce and share printers.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  In Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. create shares as desired. In Windows 7/Vista I usually shares its office and the Public directory.

  E. After you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but that is beyond the scope of this answer. MS - MVP - Elephant Boy computers - don't panic!

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• Cannot access a file after reinstalling Windows XP

  After a system crash that trashed my MBR, I reinstalled windows XP and renamed my computer.  Now, I'm locked on one of my previous files.  How can I access this file again?

  See here:

  How to capture a file or a folder in Windows XP

  John

• My lock files when I download from firefox so that others on the network cannot access it. Why all of a sudden?

  This happened a month ago and only happens when I download on Firefox.

  Help, please

  Your mean the question "to share with anyone?

  A Google image search for "windows 7 share with nobody padlock icon" (without the quotes) comes with pages like these:

  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/folder-has-lock-symbol-on-nobody-yet-file-is/ae74a084-e57d-4e70-b6e6-52b9683c33f3

• Windows j126tx from HP 15 8. Cannot access BIOS?

  I just bought the laptop today and the fn keys is really screwed up, I read that I had to go to the BIOS to change the settings so that I don't have to take for example fn + f5 to refresh the page and press f5 instead.

  I tried pressing f10 when the laptop starts but nothing happens? does anyone face the same problem?

  Hello

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• Network - cannot access one system to another in Windows 7

  In the cable system in my office, we can not able to access one system to another? His error message "cannot find the path of the network".

  Hi Jothisivalingam,

  -You're on a domain network?

  There are a number of reasons why you can't connect to other computers on your home network, or you can't share files and printers with them. I suggest you to see Help links and check if it helps.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-CA/Windows7/why-can-t-i-connect-to-other-computers

  See also:

  Why can't I access my home group?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-i-access-my-HomeGroup

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Welcomed the peripheral connected network cannot access the Internet

  I had problems getting my network hosted to start for months. Now, it starts very well and my Samsung Smartphone shows connected when I turn on the phone's WiFi. BBM has even said 'connected' in the status bar. But I can't access the net. Browsers not loading pages in all, BBM messages and whatsapp are not sent. When I checked the properties of connection WiFi network from the phone, signal is "very strong", speed of 54 Mbps. DHCP has been disabled at the start. After I enabled it, the phone didn't connect at all. Stuck on "getting IP address." Network troubleshooting says "connection to the local network 12 has no valid IP address. The connection to the local network 12 is the connection that uses Microsoft Virtual Wireless Adapter.

  Hi Pierre,.

  I understand that you have trouble connecting to the hosted network. You can contact Windows 8 IT PRO TechNet forums for the hosted network troubleshooting steps.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.