Cannot access a file with a padlock in the icon.

Similar Questions

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlook

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlookl

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation.  For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot read Document in FileUtilities to search a file with french characters in the file name

  Hello

  I'm looking for a file with french characters in the filename as"ecran.doc" in my unix Server directory and write the file somewhere, say, in a list of documents, or write to files to another directory.

  I use to read Document in FileUtilities of the Foundation, but it cannot read the file due to the french character in its name. Although it can find another name of file without these french characters.

  I tried to rename but who also can not find the file with the name of the french character.

  Please provide any idea to solve using LC operation.

  Kind regards

  Raj of Rohan.

  Hi Thomas,

  Thanks for the post, but I already found a solution to this a month ago. Sorry for not posting the solution.

  Just put the '-Djava.property.file.encoding = ISO8859-1' in your server startup JVM argument and position the rebound on the back of the server to choose the new JVM arg . And now the reading service of Document in FileUtilities of the Foundation read characters all french.

  ISO8859-1refers 'no. 1 Latin alphabet,"consisting of 191 characters from the Latin alphabet. This character encoding scheme is used throughout the Americas, Western Europe, Oceania, and much of Africa. It is also commonly used in most of the Etymologies of the East Asian languages.

  Kind regards

  Raj of Rohan.

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• Cannot access control files

  I have a Setup to RAC two nodes using ASM. I did test on it, and when I rebooted my second node, that he started the instance to the second node. I tried to do a manual start via sqlplus and got this error in the subject "cannot access control files. I checked the log of alerts for this node and that was in the background:
  Wed Jul 10 14:32:55 2009
  ALTER DATABASE MOUNT
  NOTE: library loaded: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
  NOTE: the loaded library: System
  SUCCESS: diskgroup ORCL_DATA rose
  ORA-00210: could not open the specified control file
  ORA-00202: control file: "+ ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291".
  ORA-17503: ksfdopn:2 could not open the file +ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA - 205 marked during: ALTER DATABASE MOUNT...
  SUCCESS: diskgroup ORCL_DATA has been removed
  Wed Jul 10 14:36:03 2009
  NOTE: Process of FILIPE out due to lack of activity file ASM for 186 seconds
  Stop background RBAL process
  
  I get what the output of this file but when I do a list of oracleasm disks he found all four volumes and I can browse the DSO via asmcmd. Any ideas or suggestions?

  Your diskgroup 'ORCL_FLASH_RECOVERY' climb or not... (Please check to ASM)

  on Node2:
  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ sqlplus / as sysdba

  SQL > select NAME, STATUS from v$ asm_diskgroup;

  If no editing, try... and check error

  SQL > alter diskgroup mount ORCL_FLASH_RECOVERY;

  If error, please post it... If it is ok, then start again ;) database

  $ export ORACLE_SID = DB2
  $ export ORACLE_HOME = 'Oracle chemin_installation for DB.
  $ sqlplus / as sysdba
  SQL > shutdown
  SQL > startup

  nothing else... If you drive support group (you can use "asmcmd" ASM access and check the control file)

  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ $ORACLE_HOME/bin/asmcmd

  ASMCMD > cd controlfile/orcl/ORCL_FLASH_RECOVERY /.
  ASMCMD > ls

  ....

  Good luck

• Installer of Lexmark printer drivers saved in a folder "c:\Program Files \" (with a space at the end of this one!)

  I have a real problem.

  On my Windows 7 Professional machine somehow is an automatic update of installed Lexmark printer drivers and the installation program saved files
  in a folder names "c:\Program Files \" (with a space at the end of this one!)

  This all happened the day after without seeing me what was going on.

  It seems that the Windows 7 system does not like the folder or file names ending in a 'space' or a 'period' and it will not work with it.

  The side effect is that in some sort the system has copied EACH name on this new folder called sub0folder "C:\Program Files-" and I ended up with TWO files that have the air of the same name (even if we have a space at the edn of it ".

  It isn't really a problem in what I could simply ignore it (the other folder names corrrectly operates always OK). The only problem is that changes to 'Security' affect the TWO files because Windows 7 sees the two folder as the 'same' names when setting security.

  That's why, when I tried to mark the 'bogus' as 'not available' folder to everyone (including the system) it is the same for 'Program Files' (the real one) with disastrous consequences. I had the chance to get out and restore some semb; launched sound mind to my machine.

  But I'm stuck now with this annoying issue with many sub-fdolers (which are all unaccessable because the system cannot locate).

  My question is, how to remove a file that has a 'space' as the last part of his name when Windows Explorer cannot work with it?

  Thanks a lot with no matter what helpf with this very unusual problem.

  If you have the opportunity to make a complete picture of the system of the disc, I would before you try the following... just in case remove the "bad" folder ends up deleting all good also.  Alternatively, rather than remove the directory in the last step below, rename it using a command like

  ren c:\PROGRA~3 c:\badprogs {press Enter}

  If program of the 'real' the files and other directories survive unscathed, and then delete the C:\badprogs in the usual way.

  ******************************************

  In the search box, type cmd, then right click on cmd.exe and select "Run as Administrator".  Give the password when you are prompted.

  Type

  CD c:\  {Press Enter}

  to switch to the root

  Now type

  dir /x {press Enter}

  This will show you a list of directories of names "short form".  You will probably see something like this (from a x 64 Win 7 installation, is why there "Progra ~ 1" and "Progra ~ 2" directories ")

  Directory of c:\

  01/08/2012 13:19

  PROGRA ~ 1 Program Files
  30/07/2012 13:03 PROGRA ~ 2 Program Files (x 86)
  03/07/2012 10:46 users
  30/07/2012 20:16 Windows

  In your case, your directory parasite called or PROGRA ~ 3 (if you have x 64) or PROGRA ~ 2 (if you have Windows 7 32 bit).

  Now that you know the name short, which allows to delete:

  del C:\progra~3 {press Enter}

• InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  This happens with a particular .eps file or many .eps files?

  • The EPS files from Illustrator? What parameters are used when files are saved?
  • Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
  • Where are stored the EPS files that you place in InDesign?  If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
  • If you work on a network: can the files when they are saved as EPS files on your hard drive?

  CARI

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• How can I access Siri on my iMac without using the icon?

  How can I access Siri on my iMac without using the icon?  Can I say "Hey Siri"?

  There is no option "Hey Siri" on a Mac because they do not have the necessary pickups. You must use the icon in the menu bar or Dock.

• My Lightroom CC suddenly stopped syncing with Lr Mobile - all the icons of indicator in my collections are "grayed out" - what do I do?

  My Lightroom CC suddenly stopped syncing with Lr Mobile - all the icons of indicator in my collections are "grayed out" - what do I do?

  Hi alans64812546,

  Could you please confirm what operating system do you work?

  Also are there all collections which you synced prior, so it is an Anti Virus on the computer?

  Kind regards

  Tanuj

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!