Cannot access shared files whne connected to the server

Similar Questions

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access shared folders on the home network.

  Until a few days ago, I had a successful network operation consisting of two Vista Home premium computers and two XP Home.  I have not had problems with opening files or folders before, but now I find I can access shared files and folders on the computer units XP vista, but cannot open the computers XP Vista of the units of the.  I get the following message:

  \\user-D5139A8DF2\desktop on IBM is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.

  Not enough server storage is available to process this command.

  I checked the registry as suggested, computers are all on a home network with the same workgroup name.  One solution I found in the forums has to do with my anti-virus Norton N360, but as all my computers are using the same version of that I'm uncertain or not to change the settings.  It's very frustrating.  Can anyone offer a solution or suggestion, please?

  Hello

  It might be Norton.

  If not for "insufficient server memory is available to process this command."

  Read this, http://support.microsoft.com/kb/106167

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot access control files

  I have a Setup to RAC two nodes using ASM. I did test on it, and when I rebooted my second node, that he started the instance to the second node. I tried to do a manual start via sqlplus and got this error in the subject "cannot access control files. I checked the log of alerts for this node and that was in the background:
  Wed Jul 10 14:32:55 2009
  ALTER DATABASE MOUNT
  NOTE: library loaded: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
  NOTE: the loaded library: System
  SUCCESS: diskgroup ORCL_DATA rose
  ORA-00210: could not open the specified control file
  ORA-00202: control file: "+ ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291".
  ORA-17503: ksfdopn:2 could not open the file +ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
  ORA - 205 marked during: ALTER DATABASE MOUNT...
  SUCCESS: diskgroup ORCL_DATA has been removed
  Wed Jul 10 14:36:03 2009
  NOTE: Process of FILIPE out due to lack of activity file ASM for 186 seconds
  Stop background RBAL process
  
  I get what the output of this file but when I do a list of oracleasm disks he found all four volumes and I can browse the DSO via asmcmd. Any ideas or suggestions?

  Your diskgroup 'ORCL_FLASH_RECOVERY' climb or not... (Please check to ASM)

  on Node2:
  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ sqlplus / as sysdba

  SQL > select NAME, STATUS from v$ asm_diskgroup;

  If no editing, try... and check error

  SQL > alter diskgroup mount ORCL_FLASH_RECOVERY;

  If error, please post it... If it is ok, then start again ;) database

  $ export ORACLE_SID = DB2
  $ export ORACLE_HOME = 'Oracle chemin_installation for DB.
  $ sqlplus / as sysdba
  SQL > shutdown
  SQL > startup

  nothing else... If you drive support group (you can use "asmcmd" ASM access and check the control file)

  $ export ORACLE_SID = + ASM2
  $ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
  $ $ORACLE_HOME/bin/asmcmd

  ASMCMD > cd controlfile/orcl/ORCL_FLASH_RECOVERY /.
  ASMCMD > ls

  ....

  Good luck

• Homegroup impossible to access shared files/printer on the member computer

  I have a group residential, put in place.  However, I have a computer on the homegroup that I cannot access its files little matter how many times I change file sharing settings.  In addition, this computer I cannot access the printer connected to it.  Then first set up on the homegroup we could access the files and printer on the capricious computer.  Please help beyond obvious parameter changes.

  4 computers in the homegroup

  The name of the all homegroup computers

  All computers 'workgroup' home together

  All homegroup computers use Windows 7 Ultimate 64 Bit, Windows 7 Professional 64-bit (used to create the homegroup), Windows 7 Home Premium 32-bit, Windows 7 Home Premium 32 Bit.

  The homegroup initially worked correctly for all computers.

  Windows 7 Ultimate 64 bit developed computer a blue screen of death. After windows repair, this computer can see/use homegroup, access the other folders/files, but no other computers in the homegroup could access this computer or the connected printer

  Hi Maroonsapper,

  1. what exactly happen when you try to access the shared folder? You receive an error message or error code?

  2 did you do changes on the computer before the show?

  I suggest you to read the following article on the sharing of files and libraries in a homegroup:

  Video: Sharing files with homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

   

  Share libraries with your homegroup

  http://Windows.Microsoft.com/en-us/Windows7/share-libraries-with-your-HomeGroup

  You can also see the following article for more information about homegroup:

  Access to files and printers on other homegroup computers

  http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers

   

  Why can't I access my homegroup?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  Let us know if that helps.

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

• Error installing Adobe Creative cloud due to cannot connect to the server. No firewall, no restrictions access app without anti virus blocking & Port is clear.

  Hi, I encountered error to download cloud creative adobe. For your information, I do firewall, port and access app like the app if you need level. But I am still experiencing installation error (Trying to connect to the server).

  I also downloaded the latest version of the cloud creative and reinstalled (I erased all the previous installed version of creative cloud who happened to have the same mistake to where I can't connect into consideration due to unable to connect error adobe server)

  Please advise because I bought a package of creative software to begin work as soon as possible.

  

  

  Are you looking for a fast feedback today because I can't do my job and everything has been delayed.

  Note of course: I used the creative cloud before this and he happened to have an error (unable to connect to the server from adobe), so I can not connect to the creative cloud. In this case, I uninstalled and reinstalled (using the latest version downloaded or old installers).

  There are so many invisible problem that this can... I realized by myself trying anyway possible associated with actual client errors (instead of strategy/connectivity issues pc & network).

  The solution that you have shared is incorrect, as I mentioned in my post above, I released my linking strategy and etc and the problem well obviously a customer source of creative cloud adobe itself.

  Furthermore, I solved the problem.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• established - VPN connection, but cannot connect to the server?

  vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4

  Thank you

  ASA Version 8.2 (1)

  !

  hostname ciscoasa5505

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.0.3 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 208.0.0.162 255.255.255.248

  !

  interface Vlan5

  Shutdown

  prior to interface Vlan1

  nameif dmz

  security-level 50

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.0.4 server name

  Server name 208.0.0.11

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service TS-780-tcp - udp

  port-object eq 780

  object-group service Graphon tcp - udp

  port-object eq 491

  Allworx-2088 udp service object-group

  port-object eq 2088

  object-group service allworx-15000 udp

  15000 15511 object-port Beach

  object-group service udp allworx-2088

  port-object eq 2088

  object-group service allworx-5060 udp

  port-object eq sip

  object-group service allworx-8081 tcp

  EQ port 8081 object

  object-group service web-allworx tcp

  EQ object of port 8080

  allworx udp service object-group

  16001 16010 object-port Beach

  object-group service allworx-udp

  object-port range 16384-16393

  object-group service remote tcp - udp

  port-object eq 779

  object-group service billing1 tcp - udp

  EQ object of port 8080

  object-group service billing-1521 tcp - udp

  port-object eq 1521

  object-group service billing-6233 tcp - udp

  6233 6234 object-port Beach

  object-group service billing2-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-777-tcp - udp

  port-object eq 777

  netgroup group of objects

  network-object host 192.168.0.15

  network-object host 192.168.0.4

  object-group service allworx1 tcp - udp

  8080 description

  EQ object of port 8080

  allworx_15000 udp service object-group

  15000 15511 object-port Beach

  allworx_16384 udp service object-group

  object-port range 16384-16393

  DM_INLINE_UDP_1 udp service object-group

  purpose of group allworx_16384

  object-port range 16384 16403

  object-group service allworx-5061 udp

  range of object-port 5061 5062

  object-group service ananit tcp - udp

  port-object eq 880

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq https

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq www

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq www

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777

  outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000

  outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group

  outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0

  Ping list extended access permit icmp any any echo response

  inside_access_in of access allowed any ip an extended list

  permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0

  access-list 1 standard allow 192.168.0.0 255.255.255.0

  pager lines 24

  Enable logging

  logging buffered stored notifications

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool

  192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 1 192.168.0.0 255.255.255.0

  alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255

  public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255

  public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255

  static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1

  Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  http 192.168.0.3 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt noproxyarp inside

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_cryptomap

  card crypto outside_map 1 set pfs

  peer set card crypto outside_map 1 108.0.0.97

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 20 match address outside_20_cryptomap

  card crypto outside_map 20 set pfs

  peer set card crypto outside_map 20 69.0.0.54

  outside_map crypto 20 card value transform-set ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life no

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life no

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  identifying client DHCP-client interface dmz

  dhcpd outside auto_config

  !

  dhcpd address 192.168.0.20 - 192.168.0.50 inside

  dhcpd dns 192.168.0.4 208.0.0.11 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal group anyconnect strategy

  attributes of the strategy group anyconnect

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  SVC request enable

  encrypted olivia Zta1M8bCsJst9NAs password username

  username of graciela CdnZ0hm9o72q6Ddj encrypted password

  tunnel-group 69.0.0.54 type ipsec-l2l

  IPSec-attributes tunnel-group 69.0.0.54

  pre-shared-key *.

  tunnel-group 108.0.0.97 type ipsec-l2l

  IPSec-attributes tunnel-group 108.0.0.97

  pre-shared-key *.

  tunnel-group anyconnect type remote access

  tunnel-group anyconnect General attributes

  remote address pool

  strategy-group-by default anyconnect

  tunnel-group anyconnect webvpn-attributes

  Group-alias anyconnect enable

  !

  Global class-card class

  match default-inspection-traffic

  !

  !

  World-Policy policy-map

  Global category

  inspect the icmp

  !

  service-policy-international policy global

  : end

  ASDM location 208.0.0.164 255.255.255.255 inside

  ASDM location 192.168.0.15 255.255.255.255 inside

  ASDM location 192.168.50.0 255.255.255.0 inside

  ASDM location 192.168.1.0 255.255.255.0 inside

  don't allow no asdm history

  Right now your nat 0 (NAT exemption) follows the access list:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.

  Then try to add an entry to the list of access as:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0

  It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.

• Safari/Firefox cannot connect to the server

  I'm trying to solve a problem, preventing a browser (Safari, Firefox), to access a website... because the same message appears «...» Unable to connect to the server. Could not open the page "http://www...". "' because... unable to connect to the server", not for all websites... just some, is this likely to be other than a virus/spyware/mailware question? I ran Etrecheck and have the following report:

  Any help would be appreciated

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-11 22:33:59

  Download https://etrecheck.com EtreCheck

  Time 02:23

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Click [delete] to remove the adware.

  Click on the link [check files] help with unknown files.

  Verify the signatures of Apple: enabled

  : Another problem

  Hardware information: ⓘ

  MacBook Pro Intel Core 2 Duo (aluminum unibody) (Late 2008)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = replace soon - Cycle count = 1338

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  System software: ⓘ

  OS X Yosemite 10.10.5 (14F27) - time since started: about 7 days

  Disk information: ⓘ

  SAMSUNG SSD 850 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 249,20 (Go 162,21 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ-868)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  /Library/LaunchAgents/com.sarcophagusscarid.agent.plist

  /Library/LaunchDaemons/com.adrenineUpd.plist

  /Library/LaunchDaemons/com.ossificUpd.plist

  /Library/LaunchDaemons/com.pseudofilariaUpd.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.daemon.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.helper.plist

  6 adware files found. [Remove]

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Hecatean.plist

  /etc/Hecatean.sh

  / Library/LaunchDaemons/com. Chiasmus.plist

  /etc/Chiasmus.sh

  /Library/LaunchDaemons/com.solidifiableness.plist

  /etc/solidifiableness.sh

  /Library/LaunchDaemons/com.uertur.plist

  4 unknown files found. [Check files]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 147 tasks Apple

  [operation] 60 tasks Apple

  Demons of launch system: ⓘ

  [loaded] 45 tasks Apple

  [loading] 133 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [operation] com.sarcophagusscarid.agent.plist (2015-09-23) [Support]

  Launch of the demons: ⓘ

  com [running]. Hecatean.plist (06 / 06/2016) [Support]

  [failure] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.adrenineUpd.plist (2015-10-14) Adware!  [Remove]

  /etc/run_upd.sh

  [operation] com.apple.enthinge.plist (2016-05-19) - no signature!

  [operation] com.apple.usktas.plist (2016-05-26) - no signature!

  [operation] com.chiasmus.plist (2016-06-08) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.ossificUpd.plist Adware (2015-10-12)!  [Remove]

  /etc/run_upd.sh

  [loading] com.pseudofilariaUpd.plist (2015-09-29) Adware!  [Remove]

  /etc/run_upd.sh

  com.sarcophagusscarid.daemon.plist [no charge] (2015-09-23) Adware!  [Remove]

  / Library/Application Support/SarcophagusScarid/Agent/agent.app/Contents/MacOS/agent

  [operation] com.sarcophagusscarid.helper.plist (2015-09-23) Adware!  [Remove]

  / Library/Application Support/SarcophagusScarid/Agent/agent.app/Contents/MacOS/agent

  [operation] com.solidifiableness.plist (2016-06-08) [Support]

  com.uertur.plist [no charge] (2016-05-15) [Support]

  [loading] jp.co.canon.MasterInstaller.plist (2015-06-28) [Support]

  Launch User Agents: ⓘ

  [operation] com.spotify.webhelper.plist (2016-07-04) [Support]

  jp.co.canon.Inkjet_Extended_Survey_Agent.plist [no charge] (2012-12-04) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Synchronization of box application (/ Applications/box Sync.app)

  Hidden Spotify Application (/ Applications/Spotify.app)

  Box Edit Application (~/Library/Application Support/box/Box/editing area Edit.app)

  Application Com Local Server box (~/Library/Application Support/box/Box/editing area local Com.app)

  Other applications: ⓘ

  [Ongoing] /library/uertur/uertur.app/Contents/MacOS/uertur

  com [running]. Box.Box - Edit.71032

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

  [operation] com.box.Box - local-Com - Server. 40360

  [ongoing] com.box.sync.27580

  [ongoing] com.microsoft.Excel.94036

  [ongoing] com.Microsoft.AutoUpdate.FBA.11392

  [ongoing] com.spotify.client.48028

  [ongoing] JP.co.Canon.IJ.scanutility2.CIJSUAgent

  [ongoing] org.Mozilla.Firefox.28432

  [loading] 365 tasks Apple

  [operation] 185 tasks Apple

  Internet Plug-ins: ⓘ

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-20) [Support]

  QuickTime Plugin: 7.7.3 (2015-10-14)

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-20) obsolete! Update

  EPPEX plugin: 10.0 (2014-09-16) [Support]

  Default browser: 600 - SDK 10.10 (2015-10-14)

  SharePointBrowserPlugin: 14.6.4 - SDK 10.6 (2016-06-08) [Support]

  iPhotoPhotocast: 7.0 (2015-03-02)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  10% WindowServer

  kernel_task 2%

  2% spotify Helper (2)

  1% box sync monitor

  1% fontd

  Top of the process of memory: ⓘ

  847 MB kernel_task

  Firefox 598 MB

  Softwareupdated 475 MB

  344 MB Spotify Helper (2)

  Mail 254 MB

  Information about virtual memory: ⓘ

  1.22 GB of free RAM

  used GB RAM 6.78 (2.15 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  July 10, 2016, 13:18:34 /Library/Logs/DiagnosticReports/chiasmus_2016-07-10-131834_[redacted].crash

  / Library/chiasmus / * / chiasmus

  Click go > computer > Macintosh HD > library > LaunchDaemons remove adware in trash, restart > empty trash.

  Adware: ⓘ

  /Library/LaunchAgents/com.sarcophagusscarid.agent.plist

  /Library/LaunchDaemons/com.adrenineUpd.plist

  /Library/LaunchDaemons/com.ossificUpd.plist

  /Library/LaunchDaemons/com.pseudofilariaUpd.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.daemon.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.helper.plist

  6 adware files found. [Remove]

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit

  I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.

  Today, I upgraded my computer to Windows 7 Home Premium 64-bit
  Now - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.
  I would appreciate your help on this.

  Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.

  Thanks for your help, anyway.