FireWire devices are most recognized. External hard drive and the camcorder will not connect.

Similar Questions

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My netbook does not read my disk even if his reading of my external hard drive and the dongle

  My netbook does not read my disk even if his reading of my external hard drive and the dongle

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you receive an error message?

  I suggest you to follow the links and check out them.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

  I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

  When I go to the hardware / device mananger it is in "O" but I can not find drive O

  Can someone please help.

  This external hard drive works on other systems?

  The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
  -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

  HTH,
  JW

• 1 TB external hard drive to the top has not opened on 64-bit.

  I have Dell Latitude 6500 running on Windows 7, 32 bit. I bought Dell latitude 6540 running under Windows 7 64-bit. My backup hard drive that has been used with old laptop does not open on the new computer running on 64-bit. The computer detects the hard disk; but does not not files and folders. The nodes?

  Hello Francois,.

  Welcome to Microsoft Community forum.

  You can try to follow the suggestion provided by Lionel b. Dyck responded on November 4, 2009 in the following thread and see if it helps.

  Windows 7 - reviews, but does not "see" external usb hard drive

  If the problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  
  

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  
  

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  
  

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Here is the link to download the latest drivers for your computer using the serial number or product model. You must install the driver for the Chipset in the list as USB drivers are not mentioned.

   

  Drivers and manuals

  http://www.Dell.com/support/home/us/en/04/product-support/product/latitude-E6540-laptop/drivers?s=biz

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• 750-103D want: I want to install a 3rd HARD drive but the system will not start

  Desktop motherboard has 5 heads SATA (of which 2 were used for the first DvD and HARD disk in the original Setup) and the box has 3 bays for HARD drive, but there is no additional power from the PSU cable.

  I installed a new SSD as my main and designated record the 1 TB of HARD drive that came with the desktop as my secondary school and office works just great.

  Now I tried to install an another 1.5 TB HARD drive for storage. I used a SATA power cable Y (1 male to 2 females) to extend the existing cable. However, to my great disappointment, the system is unable to start up. I guess that supply POWER 300 watts current is insufficient to start 3 disks to a single supply with extension cable.

  Issues related to the:

  1] sells HP a 500-watt power supply with power cable for SATA 3 HARD drive?

  [2] is a compatible power supply on the market (ie. not HP) who can stand in 750-103D envy? Brand/model and how much?

  Thank you.

  Hello

  Probably, you have misunderstood my response.  Unplug the original HD boot drive.

  Your question is not the power supply lack of insufficient power.  I have observed remains with HP computers with a power supply that would support three HDs off a 300 Watt SATA power cable voltage.

  Perhaps the third HD is formatted incorrectly or is defective.  The other possibility is that your SATA Y cable connection is defective.  You also need good 5V and 12V.  In addition, if you have made any hardware changes to your PC you have not indicated, then it is possible that you may need a bigger power supply.

• I'm copying images from bridge on an external hard drive and the message that you do not have permissions. All ideas

  Hi Petergo

  What version of the bridge are you using?

  Please try to export the file to your desktop and see if you get the same error

  Also follow Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS and see it helps

  Concerning

  ~ Assani

• HP - replace HARD drive and the warranty will cancel

  
  

  If you remove the panels only then the warranty is considered lame bot.

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• Reference Dell E1505 laptop - not recognizing external hard drive

  I bought a Dell Inspiron E1505 year last with Windows Vista and just bought an external hard drive laptop ( http://www.toshibastorage.com/main.aspx?Path=StorageSolutions/ConsumerStorageProducts/NewUSBPortableExtHardDrive ) from Toshiba a few days ago.

  My Inspiron E1505 does not recognize the drive.  I went to the Device Manager and the Toshiba drive does not appear.  However, the Toshiba portable external hard drive is recognized by my new laptop Dell XPS with Windows Vista.  I called Toshiba tech support and they said there is a problem with the operating system does not recognize the hard drive.  Anyone know how to solve this problem so that my Inspiron E1505 will recognize the Toshiba portable external hard drive?  The drivers are built into the Toshiba external hard drive so tehre are no drivers to download.

  
  

• Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

  I'm trying to connect to my external hard drive, but the auto test failed
  and I know that the problem is not the cable or anything like this cause it works on other 2 computers
  It won't work on my laptop
  I tried many solutions but most of them that the hard disk appears in disk management

  and they change its trajectory

  but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
  After that I did any suggestions? !

  Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

  Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  J W Stuart: http://www.pagestart.com

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp

  How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external hard drive the mbp, I get the pop following window: "external hard drive A" disc could not be ejected because it uses 'Lightroom '. Exit this application and try out this disc again. When I do that and restart Lightroom 5, Adobe Photoshop Lightroom - screen select catalog appears, but does not list my external hard drive A as a choice.

  I've been reviewing Adobe's Lightroom Help | Smart web page Previews Lightroom 5 and still have not been able to understand what I am doing wrong. Any help would be appreciated.

  HI Thomas,

  Thank you very much for your suggestions! They finally gave me the direction I go solve the problems I had. Basically, the Mac Book Pro based Lightroom irdata files still had thumbnails. Once I removed the and redirected Lightroom external hard disk, smart previews of the external drive work when the player is well off the MBP. Much obliged.

  I was wondering if you have any suggestions on how to backup all the files content and related data of Lightroom that exists on the external hard drive to another external hard drive as a backup? Ideally, it would be great if I could be able to launch security HD since the Mac Book Pro and do the work of Lightroom with the backup image files and intelligent previews correctly. Thanks again. Your help has been invaluable.