Firmewareupgrade failed - HP ProCurve 1810 G - 8 GE, P.1.6

Similar Questions

• HP ProCurve 1800 - 24G of cascade switches

  Hello

  I have the following problem. I would like to connect/stack 3 switches not by RJ45 cables copper (which I do now), but by a cascading system or optical cables. In fact, I would have preferred cascading but I don't know if this is possible with my devices. My system looks like this now

  [1] proCurve 1810 - 24G J9450A software ver. ?
  |
  |
  [2] the software J9028A proCurve 1800 - 24G worm. PB.02.09
  |
  |
  [3] software J9028A proCurve 1800 - 24G worm. PB.02.09
  [3A] Here's a ProCurve Gigabit-SX-LC Mini-GBIC with full duplex LC connector
  |
  The switch below ([4]) is in a different location, so no need of it cascading! I wanted to just make sure that you notice that on the switch [3] an optical port is already in use. But I don't know if this generation switches are supported two optical ports that are used at the same time?
  |
  [4] the software J9028A proCurve 1800 - 24G worm. PB.02.09
  [4b] Here's a ProCurve Gigabit-SX-LC Mini-GBIC with full duplex LC connector

  In the near future, my system will look like this:

  Nortel Avaya 4524GT [0]
  |   [0] here a SFP Gigabit Ethernet Transceiver connected to another switch Nortel Avay 4524GT
  |?
  |
  [1] proCurve 1810 - 24G J9450A software ver. ?
  |
  |
  [2] the software J9028A proCurve 1800 - 24G worm. PB.02.09
  |
  |
  [3] software J9028A proCurve 1800 - 24G worm. PB.02.09
  [3A] Here's a ProCurve Gigabit-SX-LC Mini-GBIC with full duplex LC connector
  |
  The switch below is in another place so no need of it cascading! I wanted to just make sure that you notice that on the switch [3] an optical port is already in use. But I don't know if this generation switches are supported two optical ports that are used at the same time?
  |
  [4] the software J9028A proCurve 1800 - 24G worm. PB.02.09
  [4b] Here's a ProCurve Gigabit-SX-LC Mini-GBIC with full duplex LC connector

  Once again, my question: is there a way to cascade [1], [2] and [3]. If so, how and how much can I add [0]?

  Thank you a lot for solutions...

  Hello

  As mentioned above, I did not use copper cables for this type of configuration so I don't know, BUT for optical cables, it should work.

  Kind regards.

• Create new project and a serious error occurs...

  If I try to create a new project at any time during the operation of Premiere Pro program gives me a "serious error" message and does not leading to an accident.

  I'm under Premiere Pro CS6 on Windows 7 Professional.

  Here are the details of event properties:

  Name of the failing application: Adobe first Pro.exe, version: 6.0.0.0, time stamp: 0x4f7177ec

  Name of the failed module: Premiere.dll, version: 6.0.0.0, time stamp: 0x4f7177e5

  Exception code: 0xc0000005

  Offset: 0 x 0000000000012836

  ID of the process failed: 0 x 1810

  Start time of application vulnerabilities: 0x01cf5a695cfb64c0

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe first Pro.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe first Pro CS6\Premiere.dll

  Report ID: 1cc11ff4-c65d-11e3-9f91-bc5ff4bc429e

  Don't know what other information to give, as appropriate.

  Any help would be fantastic thanks!

  'Serious error' message is far from generic for troubleshooting purposes. Jim has posted this link because the crash news that samsandwich provided reports "Exception code: 0xc0000005.»

  Crashes on launch that begin to occur after the program has run successfully, the first thing I would recommend must clear preferences. Sometimes they get corrupted such that they keep the launch program. Here is an article explaining how to clear the prefs: http://www.larryjordan.biz/premiere-trash-preferences/

• Poor ESXi 4 NFS Datastore Performance with various NAS systems

  Hello!

  In testing, I found that I get between a half and a quarter of the e/s inside a guest performance when ESXi 4 systems connect to the using NFS data store if the clients connect to the exact same NFS share.  However, I don't see this effect if the data store using iSCSI or local storage.  This has been reproduced with different systems running ESXi 4 and NAS systems.

  My test is very simple.  I created naked CentOS 5.4 minimum installation (completely updated 07/04/2010) with VMware Tools loaded and the creation time of a file of 256 MB using jj.  I create the file on the root (a VMDK stored in different data warehouses) partition or a directory of the NAS mounted via NFS, directly in the comments

  My crucial test configuration consists of a single test PC (Intel 3.0 GHz Core 2 Duo E8400 CPU with a single Intel 82567LM-3 Gigabit NC and 4 GB RAM) running ESXi 4 connected to a printer HP Procurve 1810 - 24 G, which is connected to a VIA EPIA M700 NAS system running OpenFiler 2.3 with two 1.5 to 7200 tr / MIN SATA disks configured in front of software RAID 1 and dual Gigabit Ethernet NIC.  However, I have reproduced it with different ESXi PC and NAS systems.

  This is a release of one of the tests.  In this case, the VMDK is a store of data stored on the NAS via NFS:

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 0,524939 seconds, 511 MB/s
  Real 0m38.660s
  user 0m0.000s
  sys 0m0.566s
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,69747 seconds, 30.9 MB/s
  Real 0m9.060s
  user 0m0.001s
  sys 0m0.659s
  mnt root@iridium#.

  -

  ---

  The first dd is a VMDK stored in a connected via NFS data store.  The dd ends almost immediately, but the synchronization takes nearly 40 seconds!  It's less than 7 MB per second transfer rate: very slow.  Then I get the exact same NFS share that ESXi is used to store data directly in the comments and repeat the DD.  As you can see, the SD is longer and the synchronization takes no real time (as befits a NFS share with active sync), and the whole process takes less than 10 seconds: this is four times faster!

  I don't see these results on data warehouses mounted via NFS.  For example, here is a test on the guest even running from a mounted via iSCSI data store (using the exact same SIN):

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 1,6913 seconds, 159 MB/s
  Real 0m7.745s
  user 0m0.000s
  sys 0m1.043s

  
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,66534 seconds, 31.0 MB/s
  Real 0m9.081s
  user 0m0.001s
  sys 0m0.794s
  mnt root@iridium#.

  -

  ---

  And the same comments linking internal SATA drive of the PC ESXi:

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 6,77451 seconds, 39.6 Mbps
  Real 0m7.631s
  user 0m0.002s
  sys 0m0.751s
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,90374 seconds, 30.1 MB/s
  Real 0m9.208s
  user 0m0.001s
  sys 0m0.329s
  mnt root@iridium#.

  -

  ---

  As you can see, the performance of NFS direct comments for each of the three are very consistent.  ISCSI and the performance of the store local data disk are both a bit better than that - as I expect.  But the mounted via NFS data store gets only a fraction of the perfomance of the any of them.  Obviously, something is wrong.

  I was able to reproduce this effect with an Iomega Ix4 - 200 d as well.  The difference is not as dramatic, butalways important and consistent.  Here is a test of a guest of CentOS using a VMDK stored in a data store provided by an Ix4 - 200 d via NFS:-.

  root@palladium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 11,1253 seconds, 24.1 Mbps
  Real 0m18.350s
  user 0m0.006s
  sys 0m2.687s
  root@palladium /# mount/mnt 172.20.19.1:/nfs/VirtualMachines
  root@palladium /# cd/mnt
  synchronization of the # mnt root@Palladium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 9,91849 seconds, 27.1 MB/s
  Real 0m10.088s
  user 0m0.002s
  sys 0m2.147s root@palladium mnt-#.

  -

  ---

  Once more, the direct NFS mount gives very consistent results.  But using the diskette provided by ESXi on a mounted NFS datastore gives still worse results.  They are not as terrible as OpenFiler test results, but they are constantly between 60% and 100% longer.

  Why is this?  What I've read, NFS performace is supposed to be within a few percent of the iSCSI performance, and yet I see between 60% and 400% worse performance.  And this isn't a case of the SIN is not able to provide correct NFS performance.  When I connect to the NAS via NFS directly inside the guest, I see much better than when ESXi connects to the same NAS (the same proportion!) via NFS.

  The configuration of ESXi (network and network cards) is 100% stock.  There is no VLAN in place, etc., and ESXi system has only one

  Single Gigabit adapter.  It is certainly not optimal, but it doesn't seem to me to be able to explain why a virtualized guest is able to get a lot better performance NFS as ESXi itself to the same NAS.  After all, they both use the same exact suboptimal network configuration...

  Thank you very much for your help.  I would be grateful any idea or advice, you might be able to give me.

  Hi all

  It is very definitely a performance O_Sync problem. It is well known that NFS VMware shops still use O_Sync for writes little matter what share put for a default value. VMware uses a custom file locking system so you really can't compare it to a normal NFS share connection to a different NFS client.

  I have validated that the performance will be good if you have an SSD cache or storage target with enough reliable battery backup.

  http://blog.laspina.ca/ubiquitous/running-ZFS-over-NFS-as-a-VMware-store

  Kind regards

  Mike

  vExpert 2009

• iSCSI - dedicated VLAN vs traffic switch

  I have a fairly low vSphere - 2 ESX hosts with 6 VM environment (will increase to 12 + VM the end of the year).  My iSCSI SAN has only 1 interface iSCSI traffic.  I currently have a VLAN defined on my switch/GB of network traffic for iSCSI traffic.  I know that the ideal is to have traffic iSCSI on its own switch.  It would be overkill for my environment? I can buy a HP ProCurve 1810 switch for under $ 400.

  Vote for her dedication also.

  In addition, you can change the iSCSI performance by substituting "automatic negotiation" in manual mode

  setting the parameters of speed of the card NETWORK and the switch. This allows you to

  enable control flow of traffic on the NETWORK adapter and the switch, Ethernet

  frames on the NETWORK adapter and the switch to 9000 bytes or more-

  data transfer more far in each packet while requiring less

  overhead. Extended frames are expected to improve the flow as well

  less than 50%.

  ---

  iSCSI SAN software

  http://www.starwindsoftware.com

• vMotion fails at 9% - Source host cannot connect to the destination host

  Hello

  I wonder if someone could shine any light on why vmotion fails to occur between an ESXi host who has just been restarted, in order to test HA. I have the following configuration:

  3 x ESXi5 DL360 G7s with two 4-way NIC

  VSphere Vcenter 5

  1 x cluster configured for DRS HA

  2 x Procurve 2910 - 24G

  The switches are not connected to each other.

  Both switches are configured as such:

  

  All ports are not marked. NO PLEASE, no routing

  Each host vMotion vSwitch is connected to two switches by 1 x 1 GB nic

  I configured a vswitch on each host of vMotion. There are two ports vmkernel with two IPS on the same subnet. There are two vmnic attached to the vSwitch. On each port, a Vmic is configured to be active while the other is unused. I enabled frames on the vSwitch and 2910 switches. A VLAN has been configured on the two predisposees 2910 for vmotion with frames and defined traffic on "no label". I can successfully vmkping all the ip s vmotion on all ESXi hosts. However, when I test HA by stopping an ESXi host, when I restart the ESXi host I am unable to vmotion in that ESXi host. When I test vmkping I find that the host rebooted can only vmkping itself and no other host can vmkping it. Vmotion attempt fails on 9% and errors with the source host cannot connect to the destination host. If I restart the two switches of 2910 I can then perform a vMotion and the vmkping is a success.

  Help, please?

  Thank you

  lansley2000 wrote:

  I have since read up on the various load balancing options and find that your method is preferable during the method of "ip hash.

  I'll make the change to "port based" and link the two switches

  Hello Simon, I think it's a good option to do, since the hash IP load balancing is a bit special and really requires both interfaces to connect to the same physical switch, which must also have a specific configuration. If you like the results after the new changes.

• Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

  We are trying to increase production of our ESX host.

  ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

  The

  grouping of parameters on ESX is rather easy to activate, however, we do not know

  How to configure the HP switch to support above connections.

  Pourrait

  someone please help with a few examples on how to seup the HP switch.

  Help will be greatly appreciated as we continue to lose tru RDP sessions

  disconnects.

  Best regards, Hendrik

  Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

  In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

  (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

  (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

  (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

  I hope this helps!

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

  If you find this information useful, please give points to "correct" or "useful".

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• Printer "filter failed" for macOS Sierra?

  Hi all

  I have upgraded my iMac and MacBook Pro with the new macOS Sierra and did not have a lot of problems until recently. As my exams are approaching, I print on my printer, Canon E560 comments. However, recently, some pages may not be printed and printing stops. He said "stopped -"filter"failed", and I can't find a way to solve this problem. I did this experiment several times, and in early printing, it is said immediately that the filter is not on my computer, but continues to print up to a page where it stops. Some pictures on the already printed pages are distorted. Is this related to the Sierra macOS? This is true for my two computers. I replaced the cartridges of ink, but in vain. I've also sent cannon on it, but they take a lot of time to answer me.

  I have another printer on the floor in my house, which is of my fathers. So, I tried printing with it, but words have white lines through it, for some pages. This shows that it may be a problem with the document or the software, macOS Sierra 10.12.

  For two printers, it seems that the content of the pages is pushed down as well.

  Thank you very much

  Ethan

  Have you looked for a new driver for your printer? Canon are responsible for updating the drivers for their products to ensure that they are compatible with the new operating system

• Failed to install Sierra

  On 22 September, I tried in vain to install MacOS 10.12 Sierra. He failed during installation with a message despite the 198 GB available disk space. Today, I tried again, but the Ap store reports that Sierra has been downloaded. If yes how to either delete it or restart the installation process?

  Re-download from the purchases in the App Store page.

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• purchase did not bought failed

  I can not bought any gems of clans clas via apple amy ID. I have 112 purchase $ failed bought failed. Please contact itunes support.

  If you did not already the message tells you to do, then you need to do (these are user forums):

  -go to http://www.apple.com/support/itunes/ww

  -Click on the flag of your country (the country where you are, and therefore the country on your account)

  -Click on contact Support to the upper right

  -Click on help under "Talk To Us".

  Or use this form: https://www.apple.com/emea/support/itunes/contact.html

• Message error "arrested -"filter"has failed."

  After upgrading to Mac OS Sierra, when you attempt to send a test print my Epson Stylus Photo 2200, I get the message error "stop -"filter"failure" in my print queue.

  

  I have left clicked on the printer-> error log menu item, and I have the following in the error log.

  E [27/Sep / 2016:10:04:40-0500] [Job 3] Job is stopped due to errors in filter; For more details, see the error_log file.

  D [27/Sep / 2016:10:04:40-0500] [Job [3] the following messages have been saved since 10:04:38 to 10:04:40

  D [27/Sep / 2016:10:04:40-0500] banner of start-up [Job 3] adding page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] queued on the "EPSON_Stylus_Photo_2200" by "derekberube".

  D [27/Sep / 2016:10:04:40-0500] file [Job 3] seized automatic...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] request file type is application / vnd.cups - banner.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] file of type application / vnd.cups - banner in queue 'derekberube '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end banner add page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] time to processing = 1474988678

  D [27/Sep / 2016:10:04:40-0500] [Job 3] 3 filters for task:

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgbannertopdf (application / vnd.cups - banner to application/pdf, cost 33)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster (application/pdf in the application / vnd.cups - raster, cost 100)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (application / vnd.cups - raster to printer/EPSON_Stylus_Photo_2200, 0 cost)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] job-sheets = none, none

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [0] = "EPSON_Stylus_Photo_2200".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [1] = '3 '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [2] = "derekberube".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [3] = "testprint.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [4] = "1".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [5] = "AP_ColorMatchingMode = AP_VendorColorMatching AP_D_InputSlot = nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName = testprint com.apple.print.PrinterInfo.PMColorDeviceID... n. = 23775 com.apple.print.PrintSettings.PMCopies... n = 1 com.apple.print.PrintSettings.PMCopyCollate... b. com.apple.print.PrintSettings.PMFirstPage... n = 1 com.apple.print.PrintSettings.PMLastPage... n = 2147483647 com.apple.print.PrintSettings.PMPageRange... a.0... n = 1 com.apple.print.PrintSettings.PMPageRange... a.1... n. = 2147483647 fit-to-page media = letter requested by pserrorhandler = standard job-uuid=urn:uuid:8781dff0-21e9-31ef-5b09-534d193452be job-originating-name of host = localhost to-date-time-create = date-time-to-processing = time-to-creation" time processing 1474988678 = 1474988678 = document-name-supplied testprint PageSize = letter»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [6] = "/ private/var/spool/cups/d00003-001.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [0] = "< CFProcessPath >".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [1] = "CUPS_CACHEDIR = / private/var/spool/cups/cache '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [2] = "CUPS_DATADIR = / usr/share/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [3] = "CUPS_DOCROOT = / usr/share/doc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [4] = "CUPS_FONTPATH = / usr/share/cups/fonts.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [5] = "CUPS_REQUESTROOT = / private/var/spool/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [6] = "CUPS_SERVERBIN = / usr/libexec/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [7] = "CUPS_SERVERROOT = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [8] = "CUPS_STATEDIR = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [9] = "HOST = / private/var/spool/cups/tmp".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [10] = "" PATH = / usr/libexec/cups/filter: / usr/bin: / usr/sbin: / bin: / usr/bin ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [11] = "[email protected]".

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[12]="SOFTWARE=CUPS/2.2.0 ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [13] = ' TMPDIR = / private/var/spool/cups/tmp ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [14] = "USER = root"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [15] = "CUPS_MAX_MESSAGE = 2047"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [16] = ' CUPS_SERVER = / private/var/run/cupsd.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [17] = "CUPS_ENCRYPTION = IfRequested"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [18] = 'IPP_PORT = 631'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [19] = "CHARSET = utf-8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [20] = "LANG = fr_FR. UTF - 8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [21] = "APPLE_LANGUAGE = en - en"

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[22]="PPD=/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [23] = "RIP_MAX_CACHE = 128 m"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [24] = "' CONTENT_TYPE = application / vnd.cups - banner" "

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [25] = "DEVICE_URI = 0 usb://EPSON/Stylus%20Photo%202200?serial=L5602021107061925"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [26] = "PRINTER_INFO = EPSON Stylus Photo 2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [27] = "PRINTER_LOCATION = MacBook Pro Derek Berube\"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [28] = "PRINTER is EPSON_Stylus_Photo_2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [29] = "PRINTER_STATE_REASONS = none"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [30] = "CUPS_FILETYPE = document"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [31] = "" FINAL_CONTENT_TYPE = vnd.cups - raster/application ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [32] = "AUTH_I."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgbannertopdf (PID 2075)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 2076)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgpdftoraster (PID 2077)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 2078)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started backend/usr/libexec/cups/backend/usb (PID 2079)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] Message catalog filename is \"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framework s/PrintCore.framework/Versions/A/Resources/English.lproj/cups_apple.strings\.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_banner(filename=\"/private/var/spool/cups/d00003-001\")

  D [27/Sep / 2016:10:04:40-0500] [Job 3] usb: AppleLanguages =-"en - US\".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + connection-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] looking for \'EPSON Stylus Photo 2200\'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] open connection

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2078 (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) was arrested with the 206 State (output Interface queue is full)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Tip: try to set the LogLevel "debug" to learn more.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Page = 612 x 792; 9.40 at 603-783

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin ' permissions OK (040755/uid = 0/gid = 80).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / System/Library/Printers/Libraries/USBGenericPrintingClass.plugin ' permissions OK (040755/uid = 0/gid = 0).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0 x 00000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin) (kr:0 x 00000000)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: copy to temp \"/private/var/spool/cups/tmp/0081d57f93b5a\ print file '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE:-connecting-to-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sending data to the printer.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sent 0 bytes...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + cups-wait-for-work-over

  D [27/Sep / 2016:10:04:40-0500] [Job 3] align for banner 1.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2075 (/ usr/libexec/cups/filter/cgbannertopdf) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2076 (/Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdf topdf2) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: \"/private/var/spool/cups/tmp/0081d57f93b5a\"has 1 pages.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: open \"/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd\ file PPD «...»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: PreferredRotation = - 90

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsPageSize = [612 792], cupsImagingBBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width = 612, length = 792, high = 9, low = 40, left = 9, right = 9

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970, cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: colorspace = 1, bitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: the seller matching mode is turned on and the requested transfer color space is sRGB.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: skipBytesPerRow = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bandwidth = 2970, bytesPerRow = 11888, band height = 3715, height = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width of the frame = 2970, height = 3715 bitsPerComponent is 8, bitsPerPixel = 32 bytesPerRow = 11888, bitmapInfo = 5, resolution = (360.000000, 360.000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] HWResolution = [360 360]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] ImagingBoundingBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] margins = [9-40]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PageSize = [612 792]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerPixel = 24

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBytesPerLine = 8910

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: rasterWriteHeader: unable to write the header streams raster: Broken pipe

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bytes written for the side 1 = 0, err = 5

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2077 (/ usr/libexec/cups/filter/cgpdftoraster) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] waiting for read thread exits...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2079 (/ usr/libexec/cups/backend/usb) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end of messages

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer - state = 3 (idle)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer-State-message = "Sending data to printer."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] - printer-motivation = none

  Line 66 # in the above seems to indicate the rastertoescpII utility failed with a status code of 256 and the error message "output Interface queue is full.

  Troubleshooting steps

  To try to solve this problem, I followed the steps described in the article «problems of printer on your Mac»  I have reset the printing system and it does not work.  I have also unplugged the printer, deleted the contents of the folder/library/printers/and then plugged the printer into.

  You will need to check with Epson to see if there is a new driver for your device compatible with macOS Sierra. The old drivers are not compatible. Even with the new driver, some people state that the error is not fixed :-( YMMV.

• SIMBL installation failed

  Recently, I upgraded my OS X to OS X 10.11.6 10.11.5 mini and I now get a message indicating:

  "Failed to install SIMBL. Something going wrong, probably protect the integrity of the system.

  the console contains the following entries:

  27/09/16 9:44:45.139 AM com.apple.xpc.launchd [1]: switch (net.culater.SIMBL.Agent) please far OnDemand to KeepAlive.

  27/09/16 9:45:02.639 AM Dock [293]: cannot create dictionary Pack, the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle/Contents/Info.plist".

  27/09/16 9:45:02.640 AM Dock [293]: unable to load the package to the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle".

  27/09/16 9:45:02.769 AM cDockHelper [380]: failed to install SIMBL

  27/09/16 9:45:32.228 AM SIMBL Agent [336]: cannot create dictionary Pack, the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle/Contents/Info.plist".

  27/09/16 9:45:32.229 AM SIMBL Agent [336]: unable to load the package to the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle".

  27/09/16 9:48:25.563 AM SIMBL Agent [336]: cannot create dictionary Pack, the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle/Contents/Info.plist".

  27/09/16 9:48:25.563 AM SIMBL Agent [336]: unable to load the package to the path "/ Library/Application Support/SIMBL/Plugins/Webroot.bundle".

  Webroot's antivirus software.

  someone has an idea of what could be the problem?

  Thank you

  John

  My recollection is THAT SIMBL has always caused problems with OS X.

  Do you consider this mission-critical in your workflow?

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max