firmware Acer iconia b1-710

Hi all I'm looking for firmware download for my iconia b1 can someone help me because I'm stuck in boot loop tried hard reset and factory reset but no need to change firmware put on sd card.

I guess you already tried Acer Support for your region? They have access to the update.zip file that you need...

[edited to conform to the guidelines]

Tags: Acer

Similar Questions

  • What version of Acer Iconia B1-710 I have?

    HELO Acer community,
    Well, this might the seams strange, but I do not understand what version should I,.
    I received this tablet as a gift from my brother, but do not know what version is this.
    As far as I know there are two versions of this tab 16 GB and 8 GB but when I go into storage, it shows I have a 12,74 GB total space and I don't have an external sd card in my tab.
    If you guys want more info I can give.
    Thank you.

    Acer ships B1-710 tablet with Android 4.1 Jelly Bean. Follow the steps below to check the version of the operating system installed on your tablet.

    Press Settins.

    Below, you'll see 'on the shelf '.

    Touch it. You will see the version of the operating system.

  • Acer Iconia B1-710

    My tablet is stuck on the Acer Explorer beyond limits screen. I tried to turn it off and even tried a reset but nothing. When I turned it off last night, I closed all the way down it out very well. Can someone help me please?


  • Manual Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB) by Acer

    How can I activate my

    Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB)

    ???

    Nice day

    Download the user manual from: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3849

    Kind regards

    FReeZA

  • Acer Predator G3-710 GTX 1070 overheating

    Hey guys

    So I have an acer Predator G3-710

    • Intel Core i5-6400
    • 8 GB RAM
    • GTX 1070

    But it keeps overheating when im playing games on ultra high heat. And since there were "IceTunnel thermal system" theres no fans in the enclosure.

    A fan will simply solve this problem? The poor obvisoly can't get enough air. So her dosent system thermal iceTunnel seem to work now

    If the case has a place to install a fan, you can buy a fan that uses a molex connector for power.  But it will be always on except if you buy one with an on/off switch.  Temp could lower a bit.

    Try to use the Geforce experience to optimize your game settings.

  • Acer Iconia Tab 8 A1-840 support "Smart box" / standby function (cover face magnets)?

    Acer Iconia Tab 8 A1-840 support "Smart box" / standby function (cover face magnets)? I have a new Tablet and Smart box, but this feature does not work. Not sure if it's the tablet or the case.

    Hello

    By default, only the Tablet is not compatible Smart box, but there are few applications in the game store that can be used for the same thing. See you soon

  • How can I transfer my photos from twenty of my Acer Iconia W4 820 I toke on my desk?

    How can I transfer my photos from twenty of my Acer Iconia W4 820 I toke on my desk? is anyone in the Forum who knows and can explain it to me?


  • Acer Predator G3-710

    Acer Predator G-710 I9820

    Where can I find the documentation on the ports and connectors on the back? (Manual UM_1.0_En.pdf is not detailed enough)

    Starting on the top (back side)

    -Port HMDI, but covered with a plastic?

    -Port DP with removable plastic (ok)

    -several USB ports and audio (ok)

    -Geforce GTX960: 1 white DVI port, marked 1 (DVI-I dual link?), HMDI port and 1 DP

    -geforce GTX960 below: 1 black port marked 2 (DVI - D dual link?)

    Rgds

    Hi ddh43,

    You probably just ask a specific question to be better results from the community.

    The first ports are usually covered because everyone understands that the video card should be used and they will plug the video ports of motherboard and have less experience.

    The GTX960 takes two slots, so you should have 2 DVI, 1DP, 1HDMI in this configuration.

    Cory

  • Acer Iconia A3 - A10: is it possible to downgrade to Android Jelly Bean?

    Hello

    I upgraded my Acer Iconia A3 - A10 of Jelly Bean to Kitkat a few days ago. Not happy at all. Many applications running too slow, wifi doesn't work well, etc.

    I did a factory data reset but my Tablet Android 4.4.2 lights. Is this normal?

    Is it possible to downgrade to Jelly Bean, the version that came with my Tablet? How to do?

    Thanks in advance.

    Hello

    OS installed at the factory reset in Android, does not get the unit to the factory, it resets the same default version, this is quite normal. But if you want to return to JB, yes it is possible if you can find the image @ acer support, as now, the image is not available, maybe you need to wait, or could contact support for assistance, Cheers,.

  • Please help my acer iconia 10 usually load or light just bought a months :(

    It please does not load help acer iconia 10

    just bought a month ago

    Contact Acer customer service or your seller, because it is under warranty.

  • Acer iconia a100 update fails "network coverage is currently poor."

    My Acer Iconia A100 has Android 4.0.3 and all updates fail with the message:

    Network coverage is currently low

    but it is not 100%, and all other network functions work fine.

    I see a LOT of problems, debate and questions with this same error on models Iconia tab, but so far no clear solution.

    Is this one? or is this just an orphan machine?

    Their support website lists nothing available for the A-100.

    Your version is the latest for PA_CUS1.

    the documentation is normally in the update zip file.

  • Tablet unloading / loading too fast of Acer Iconia A1-713.

    Bought an acer Iconia tab 7 (A1-713) a little over a month. Now battery is suddenly dump / reload too quickly. Has implemented to update the KitKat for a long time, so don't think this is the issue, but now the battery dies even if its display of 75% with a few minutes of reading simple docs in offline mode. Need help... Please!

    I'm afraid it sounds like a hardware failure with the battery. Contact Acer support and they will repair it for you.

  • Acer Iconia tab upgrade 10 (A3 - A20)

    I received a notification to upgrade my tablet, after the upgrade, it is still on KitKat, thought that it would be upgraded to lollipop as mentioned on: http://www.pcadvisor.co.uk/reviews/tablets/3601426/acer-iconia-tab-10-review/

    It is not an official release date on the patience of lollipop update so... need.

    Moreover, sometimes little updates on the previous version are necessary before a new version (KitKat of Lollipop)

  • Manual keyboard Acer Iconia W700-6499

    My Acer Iconia W700-6499 came with an Acer toteable stand covered with leather with a built-in keyboard.  There is no paper or electronic manual covering this accessory.  I couldn't find one online.  The problem is that I would like to know how to engage the switch next to the battery lights on the keyboard.  There must be a way to turn it off, or just drains the battery internal when the Tablet is in the stand and not connected on the support in plastic.  someone had this problem?

    I found the "Acer keyboard case Addedum" document that accompanies my W700.  The case has the model # KT - 1252 and there are a few entries in the section Archives 2013 these discussion Forums.  I don't see a way to attach the document but may be able to copy / paste If someone is desperate.

  • Acer Iconia (W1-810) 8W - boot from USB...

    Hello world
    I have an Acer Iconia 8W (W1-810), and I tried to install another OS through my USB key. I already changed the boot order in the bios and secure boot disabled, but I'm not able to start. Y at - it a boot to access menu, if yes, how to reach it, if not, how can I start the USB? Thanks in advance.

    Edit: I activated the F12 boot menu and tried a USB pen create fom Universal USB install (which is what I always use to install Ubuntu on a PC) and Intel on the other with Win32 Disk Imager (with Android Ivy-bridge of the Intel Web site). Menu of startup only recognizes Windows...

    Edit 2: updated the BIOS to 1.06, installed rEFInd on Windows, nothing... Does not seem reccogize what USB deviced outside Windows...

    Discovered that there is a single machine 32-bit EFI. Managed to adapt the Ubuntu image to have a 32-bit efi loader and managed to start the USB key. Always difficult to install but at least I'm in.

Maybe you are looking for

  • HP 8 2 compressed: how to use a memory card

    Can someone help me with the use of a memory card.  Is there a special I should use?  Also the instructions for inserting it. ?  It seems that insert you it just at the top?  Thanks a lot... gartzo

  • Can I delete photos from my Mac WITHOUT removing them from shared albums?

    I only use photo program to create shared to my AppleTV photo albums and display on my iPhone. I keep all my original photos in Lightroom database. I also add photos to my albums shared from two separate Macs connected to the same account iCloud. I'm

  • Voodoo Omen with regard, water pump is longer supported by HP - help! : p

    Hi all I have an old omen Voodoo (water cooling system) - here is a link to a review of this version: http://reviews.cnet.com/desktops/voodoo-omen/4505-3118_7-31292135.html which was purchased from voodoo before its acquisition by HP.  HP supports mo

  • PSSD-p2 firmware update

    Hi guys,. I want to know whether (and if so, of course where) there is an update available for the bhsol-p2 in my asus t91mt, pls googlin was not very successful ^ ^

  • DVD wrong region

    Hello: I have Windows 8 Pro installed on my Acer laptop.  However, I am not able to play DVD movies.  When I put the DVD in the DVD drive, nothing happens.  Sometimes, I get a message that the DVD region is not correct for the DVD. How will I know wh