Firmware help

Similar Questions

• MacBook pro locked with a password of the firmware, Help!

  I have a macbook pro, end 2011, which is locked with a password of the firmware, and I do not know. Are their any of you know how powerful hardware hacks, and no one knows a way of hacking the firmware lock? I tried to avoide paying someone to fix my machine and unlock the firmware, then I tried a lot of material tweeks likely to pass the lock of the firmware and unlock my computer. Please help and thanks in advance for all this you find to do it yourself Tech who would rather their firmware password reset themselves. Thank you.

  See this article:

  http://osxdaily.com/2015/01/28/forgot-Mac-firmware-password-what-now/

• utility based on the Web shows again the old version of the firmware - HELP PLEASE

  In September of last year, I replaced my old Linksys with a new (BEFSR41 ver 4.3).  I started to get in trouble yesterday, so I consulted the web-based utility and noticed that the window says: the firmware 2.0 version!

  I tried to update to the latest firmware available for my model, following the instructions on the site but something went wrong and the firmware has been altered. Finally, I managed to update the firmware via tftp utility, and he said that the upgrade has gone through. But the utility still shows the version of the firmware 2.0.  Under the router > status reads as follows:

  Capture (share.field_33_UI_share) Firmware Version: 2.00.4 build 7, January 20, 2010

  I am very confused. Which is the latest firmware or I get it confused with the 4.3 version number?

  I really hesitate to update the firmware again after the problems I had the first time.  If anyone can give me some advice on what to do, I would really appreciate it.

  You confuse the hardware version of the router with the version of the firmware.

  The BEFSR41 is the model. One physical versions of this model. Each version contains a different material. The exact hardware version is printed on the label under the router.

  The firmware version is the version of the firmware (software) running on the router. It is important that the firmware used is compatible with the hardware version of the router. For this reason, you must select the correct hardware on the router Linksys support download site version to be sure to choose the right firmware compatible with your router.

  The latest version of the firmware of the BEFSR41 v4.3 is Ver.2.00.4 Build 7. You have the latest firmware.

• Updated Dell inspirion 3537 disk hard firmware help me?

  I tried to update Dell inspirion 3537 disk hard firmware (ST500LM000/ST1000LM014 Seagate Firmware Update) but when I did all the instructions I have to boot usb and then start the update and ultimately he said

  There is no record that supports the update and the hit enter and reboot... and that's all... often I do something wrong hard disk when it says the update is not for the hard drive... How this update is not for my hard drive? its says sa to my laptop... Here is the www.dell.com/.../DriversDetailsfirmware. Starts = 3390316683 & W764 = osCode & productCode = inspiron-15-3537 & languageCode = EN & categoryId = SA

  You need not update the firmware for this model drive.

• I got the error code: 0xc0000034 on my windows 8 and need help.

  I got home exhausted and started my Windows 8 desktop computer I was greeted with a screen that says The Boot Configuration data file is missing some required information. File: \BCD error Code: 0xc0000034. I don't know anything else and have no idea of what are the parameters of the UEFI firmware, help me?

  Hi Gilbert,.

  1. What is the brand and model of the computer?

  2. do you have the DVD to install Windows 8 with you?

  UEFI (Unified Extensible Firmware Interface) is a standard interface for firmware for PCs, designed to replace the BIOS (basic input/output system). This standard was created by more than 140 technology companies within the consortium UEFI, y. It is designed to improve the boundaries of interoperability and software address of the BIOS.

  You can view the following for more information Microsoft article.

  What is UEFI?

  http://Windows.Microsoft.com/en-in/Windows-8/what-UEFI

  This error occurs when one of the following conditions is true:

  • The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  • The Boot\BCD file on the active partition is damaged or missing.

  I suggest you perform the steps mentioned by "P Jessen replied on 10 August 2013" in the material provided.

  Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/error-code-0xc0000034-in-Windows-8-boot/15e63631-1f94-473f-83a8-8d7af48a83f7

  Hope this information helps. Response with status so that we can help you.

• SD-R6012 1334 DVD - R / RW Drive is not working properly

  Hi all
  I was hoping that someone could help me. My player SD-R6012 DVD copy CD fine, but will not burn any DVDs. Ive tried to install the update of firmware for him, but he came back with the message:
  "The CD drive Firmware is NOT need updated firmware"
  Help, please!
  Thank you very much

  Dan

  Hello

  Have you checked the different DVD?
  Sometimes the drive cannot burn DVDs because the player doesn't supports all DVD media. I recommend checking out the different DVD.

• Sansa won't work in MSC mode at all

  My sansa worked perfectly before, it was rockboxed and loaded with music. Then one day I turned it on and it froze in the system menus of rockbox. I turned the sansa on and outside and he consistantly froze at the same point. I thought it was a problem of rockbox, so I used sansa patcher to uninstall bootloader. Who took care of my freezing problem but now using the original firmware it only sees half of my songs and I don't have a micro sd chip in there. The other problem is that when I put the sansa MSC mode and plug it into the brief of screen sansa bed connected, but then once I try to explore the sansa in windows Explorer, that it goes offline and the computer crashes until I unplug the sansa. I isolated it as a flaw in the sansa by trying on each usb port on three computers different and three different versions of windows (Vista Premium, Windows XP Pro, Vista Home Premium 64-bit). I tried to plug it on and off. Is there a way to fix this? Replace the recovery mode firmware help? The device of formatting would have an effect? MTP mode still works well but I would like to get rockbox works again and I doubt that I can solve the problem of database of it not finding my songs without MSC.

  I appreciate all help.

  It's quite strange. MSC is usually easy to use mode and PSG is the problem. I suspect that there is a bad file that was transferred to MSC mode (or while using Rockbox) and he's in trouble. But you can't really fix that one file without returning MSC. I also assume that you use Rockbox to read files as file names and that these files do not have the Sansa like ID3 tags. But any. It is now a mess.

  Formatting will delete all the files that you have added to the unit, so let's hope you have backups.

  First, try to update or replace the firmware in recovery mode. See if that stabilizes the connection of MSC. You can then run ChkDsk for a chance at a file of fixing problem.

  If not, get in shape via the recovery mode. Make an empty folder called sansa.fmt and drag it into 16 MB - FORMAT. Do not use explore to the Format 16 MB FORMAT - that would make things much, much worse.

• E280v2 music constantly playing, participating screen scrolling

  I'm a newbie here. 1 MP3 player. I know that I have v2, I've seen verification of firmware help to know that I. I looked through 33 pages of posts and none so far address my issue. Somehow the monkey behind the e280v2 (me), got the music to play constantly and can not get deselected. I also loaded an Overdrive Audiobook, and whether it is music or audiobook, both appear on a screen of scrolling at the bottom of the window. I can't stop it. I can pause so I don't hear it, but the text info keeps rolling down. I tried to check the settings and can not understand. Please help me, gently, using non-technical terms. I'm not very savy to this kind of stuff. Any help would be greatly appreciated. Thank you in advance for your help! Diana

  Do not be afraid. Your mental health is safe and secure. The truth is that there is NO downtime on your drive. Or a lot of other or the other. BREAK is as close as you will get to it, and when you return to the main menu, that either played it, whatever .mp3 or radio, it scroll on the bottom of the screen to let you know what's on when you left.

  There is no 'need' for a function breakpoint on these flash memory mp3 players as there are no moving parts to wear. No rolls capstan casstte tape recorders, no CD to turn around, not nothing. If no STOP function.

  Just something, it must be endured.

• Disable Remoting on EA9500

  How to disable remote access on the EA9500? The firmware help documentation mentions an option to disable access, but the option is not present in firmware. Port 80 is open on the side WAN.

  Chris3 wrote:
  Correction. The model is EA9400
  Firmware is 1.0.2.174688

  Port 80 is open on the side of the router WAN. I guess that's for remote access / Smart WiFi from outside the LAN network. Is there a way to disable so that port 80 is not open on the side of the router WAN. Thank you

  WiFi Smart does not use port 80 for remote access. It is a Cloud Computing service, so I don't think that all ports are open for remote access. Instead he communications with the Linksys cloud server directly.

  Port 80 could be opened by an IP camera or computer to your network if you have UPNP enabled in the EA9500. To test this disable UPNP on the router and restart.

• WRT54G2 Dropping connection with active Access Restrictions

  Recently, we have replaced Nano from my 13 years with a key, which means that it can now access the internet from (almost) anywhere in the House.  So I did some research and found the WRT54G2 of Access Restrictions.

  I got the WRT54G2 for 5 years, and it has been extremely reliable.  I'm a programmer (although, ironically, not necessarily PC-savvy!) who works full time at home, and I have no problem with the network.  But now that I have implemented Access Restrictions, he abandoned his connection once or twice a day.  So it falls, it becomes quite slow.  Once it comes down, I unplug the router, wait 60 seconds and plug back in.  Then everything works again.

  I found no other people (in the forums) mention the same problem, but I hope someone can help out me.

  Access restrictions are the following:

  • Status: activate
  • Change the list of PC: IP range 01:2 ~ 254
  • Days: every day
  • Opening hours: 24 hours
  • Blocked Services: NO
  • Blocking of the website with URL: white
  • Blocking of the site by keyword: naked, nude, etc...

  I have 3 polciies due to the number of keywords I am trying to block, given that each policy allows only 6 keywords.  Policies are all set to the top in the same way except, of course, the key words.

  The WRT54G2 is model V1, and the version of the firmware is 1.0.01.   The upgrade of the firmware help?  Download from Linksys for model 1.0 page, says "no available firmware/driver download.

  Access restrictions, "IP Range 01" should be in 100 ~ 149 instead of 2 ~ 254?  I am train to restrict our family office, my laptop, iPad and keys - anything in the House with internet access.

  Thanks in advance for your help.

  Yes, I think that any other additional filtering that by default will slow down most any router. It is probably more problematic for wrt54g2 because if it is little CPU and memory.

  I guess you can try to reset to the default values and reconfigure him from scratch. But still, I don't think that the wrt54g2 has a very large CPU that can handle a large number of filtering.

  Maybe try a solution like Norton DNS DNS? Or open DNS? Instead of access restrictions. I don't know, I'm not real experienced with access or parental control restrictions.

• DVD read Drivre onlly CD but not dvd

  I did a restore that installed windows vista sp1 on my laptop but the problem is that

  now dvd drivr only reads CDs and not DVDs

  NET much the said firmware update, I searched but I got HP dv6602au laptop computer I can't find firmware help kindly me

  concerning

  raj1402

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 10-2101 U.S. Tablet HP: Need help with firmware mix to the top

  Little problem with the tablet in place lately and accidentally erased the firmware. My best look up and somehow able to reinstall one from here. But the thing is now the entire Tablet is in Chinese, because it seems I could have installed the wrong one... ghoulish pls help me fix it? Appreciate the help if ever...

  Hi@Robin Wendigo,

  Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Problems of language on the tablet settings. Is this fair?

  I want to help you.

  Follow the steps from the link below and check if that helps.

  http://HP.care/2dyWVI3

  I hope this helps. Let me know to learn more

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• I tried to upgrade to 9.2.1 new firmware ios but its not letting me. Can you help me?

  I tried to upgrade to 9.2.1 new firmware ios but its not letting me. Can you help me?

  What happens when you try to update? Put you to update over the air to help

  cellular data or by connecting the iPhone to the computer with which you

  normally the synchronization and using iTunes to do the update on this computer?

  If there is an error message, what is the exact

  full text of this error message?

• HP Envy (E7A75EA): help! Update firmware laptop = death! Flashing caps lock (2 flashes).

  Hi all

  I have just updated the firmware on my desire to 2014 (device E7A75EA code) to "F.68 Rev.A" to HP support and now it does not start!  Instead, all I get is a blank screen and the caps lock flashes twice (tells me means corrupt BIOS!)

  I followed the instructions carefully and no error message appeared in Windows, but the laptop restarts it impossible to load Windows and just gets stuck on this white screen.  I tried removing the battery/power cord, and then holding down the power button for 1 minute, but it did not help.

  Can I boot from the CD/USB and flash back, the old firmware (v43 I think)?

  Help, please!

  He's alive!

  I removed the CMOS, powered by the laptop battery (it starts in Windows), stop, put back the battery CMOS and continues to start correctly.

• E260 keeps restarting, firmware update does not help

  Hey everybody

  So I'm trying to fix my Sansa e260 friends and I'll get in trouble. When you turn it on, it just continuously restarts itself, I've included a video of what he does. http://Tinypic.com/r/2wq78jp/6

  I have already searched through this forum and tried the firmware update, after the update exactly the same thing just keep to themselves. I don't know where to go from here, any help would be appreciated. Thank you!

  Formatting the device using the Recovery Mode.  This erases all the materials for the device, but it's locked up in any case.

  For this procedure, first of all we have this word from our sponsor:

  In Recovery Mode, do not USE NOT THE COMMAND FORMAT WINDOWS ON THE PARTITION RESERVED.  Use the trick of ONLY sansa.fmt folder!

  Well, here are the steps (features of version 1 only):

  • Start with your OFF e200.
  • Slide the HOLD switch to the right (orange list).
  • Open a Windows Explorer on your PC.  Use my computer or [Windows key] + E.
  • Press and hold the REC button on your e200 while plugging in the USB cable.
  • The Sansa will specify "Welcome to Recovery Mode, type MSD."
  • On the PC, you will see a new device labeled 16 MB FORMAT.
  • Double-click this icon to open the reserved partition.  Yet once, DO NOT format using the available Windows command!
  • Right-click in this partition and select new folder.
  • Rename it sansa.fmt folder and you're ready!
  • With the help of remove it safely function (icon at the bottom of your screen in the taskbar), eject the Sansa.
  • Slide the HOLD switch to the left.
  • Try turning your restored e200 once she gets in shape automatically.

  Let us know how it goes!

  Bob