WRT54G2 Dropping connection with active Access Restrictions

Similar Questions

• Vista Wi - Fi connected with limited access

  I can't connect to the internet.  My shows of WiFi - connected with limited access.  When I view the status of wireless network connection - it shows IPv4 and Ipv6 not connected.

  This suggests even more than the fastest and the best option you have is to contact the ISP and have them help you with the installation and check all devices (including their and their connection to your location).  You can fight with various alternatives that may or may not work because we are not sufficiently familiar with your Installer, equipment or requirement of ISP, or you can go directly to them and I'm reasonably sure they'll have you facing up and running without delay (assuming that it is not a hardware problem or something at their end).

  The decision is yours.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  You will need to create a new post on the TechNet forum for assistance in the field of related issues:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• I had the iphone, it's locked and connected with icloud access code. I don't know password and icloud account. How to reset the iphone as a new one.

  got the iphone 6s unfortunately while walking. It is the access code locked and on the audit, it is connected with icloud. But I do not know icloud account. How can I reset this phone like any other?

  You can not.   You must contact the previous owner and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• RV082 and Windows 7, no internet connection with active firewall

  Hello

  I have a 1.3.98 - tm firmware RV082 and have recently upgraded several Machines to glass & RC for testing, but they can't access the internet.

  They can access all the other mahcines internal, but cannot ping the router.  The first Pc I upgraded was beautiful and accessible to the internet without problem.

  The second started Ok but then loses the internet connection.  It can access all internal machines and if I reboot it with XP (dual boot) it works fine.  He has been an operational machine without problems netowrk for 2 or 3 years.  I tried a diffetrn nic card and another cable froma different wall point in case there was a problem that XP could cicumvent and Windows 7 has been more difficult.

  Now the second PC has started doing the same thing and wont connect to internet.

  If I disable the firewall on the RV082 Windows 7 PC connect correctly.  Can I wathc the tray icon of system on the State of PC modification simply chagnign the status of the firewall on the router.

  Occasioanlly a PC will continue to work for a short period before losing internet again or blocked him.  I have checkled newspapers and others are no entries in the standard newspaper.

  I bypassed Vista Batteux ther so a setting or something I need to change on the window smachines, but as I have Windows 7 on test in withotu the Council to clarify a problem and my two lapotps and have connected through various cafes, Internet etc. even in Spain and Brazil without problem I tend to think it's a problem with the RV082.

  Any ideas would be helpful?

  Thank you

  Kevin

  All specifications are as follows, I tried you understand all of the same information if some irrelevant1 may be:

  No antivirus on the PC yet!

  IBM PC with 4 GB of RAM, pnetium 3.06, 80 GB hdd 2 partitions dual boot Windows XP and Windows 7 Ip static (but tests with DHCP as well) 10.1.2.13 - 2 3com 3cT 1000 + cards internal network - REaltek 10/100 (disabled)

  IP 10.1.2.13 void 255.255.255.0 Gateway 10.1.2.1 dns 222.222.222.14

  Reference Dell GX520 with 1 GB of RAM 80 GB drive hard new installation Windows 7 dhcp

  RV082 LAN 10.1.2.1 sub 255.255.255 DHCP issue. In theory irrelevant, but there are 3 VPN tunnels to the 10.1.3.0, 10.1.4.0 and 10.1.5.0 networks

  WAN1 222.222.222.11 void 255.255.255.248 gw 222.222.222.14 dns 222.222.222.14

  WAN2 disabled/empty

  Loads of transfer App for phone system Avaya, RDP, HTTP, HTTPS, FTP, TFTP, SMTP, POP3, Netware etc etc etc.

  IP 222.222.222.14 is a 3com office connect ADSL router

  LAN 222.222.222.14 sub 255.255.255.248

  WAN DHCP of BT ADSL

  222.222.222 ip addresses have been changed for safety!

  This set up was valid for 2 or 3 years without problems

  Hey Kevin,

  To clarify, we have not heard of this I didn't think (I am curious as well), did this start happening when you upgraded the computers?

  Its sounds like it from what I've read, and also you can generate by activating and deactivating the FW on request, but this didn't happen until you have changed the PC SW?

  If it does, then, looks like soemthing SW PC made and maybe you can endure a wireshark trace and try to sniff which continues when the PC tries to access the internet.   I'm not asking to review track, only that it can help you.    If you feel like it is a defect of the Cisco product, you can open a folder with the Small Business Support Center and they will watch the track with you.

  Steve DiStefano

  IS

  Sales Channel field in the United States

• How to work with the "access restrictions"? Help, please

  Hello

  How can I restrict internet access at certain times for the same terminal (PC)?

  For example I want to allow the MAC address for Computer1 to access internet (each Tuesday and Friday) for 2 hours between 11:00 to 13:00 and the second hour is from 17:00 to 18:00

  Terminal: day: (access time)

  Computer1:Friday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  Computer1unday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  and to deny access to all the other times.

  How to do this?

  my router is wag54g2 Firmware Version 1.00.19

  There are two types of policies: you can't deny all internet or you can allow internet with few exceptions closely (filtering).

  You want to block internet completely, so you want to deny only policies. You don't want to do filtering. At the time where internet is not blocked, you want full internet. (?)

• Apple Watch drop connection with Plantronics BackBeat FIT

  Hello. I recently bought a pair of headphones Plantronics BackBeat FIT to pair with my Apple Watch wireless via bluetooth. I was easily able to pair the headset with my watch as soon as I started to exercise in the gym, the headphones were disconnected after only a few seconds. Extremely frustrating! Even after re-connecting/re-pairing etc. several times, I still encounter the same problem. Will there be a fix anytime soon to fix the bug?

  There is an update of the firmware you should do. Download the app on your iPhone and do the update. It's the Plantronics website:

  BackBeat MADE Firmware Release Notes

  Version 594

  26 April 2016: BackBeat FIT 594 Firmware Version

  What's new

  • Audio performance with the Apple Watch

• What can I do when my computer show me connected with limited access to Windows Vista

  After my laptop has identified the n WEP network it shows limited access

  Wat can I do to solve the problem?

  Hello

  Try going into your router settings and make sure all are correct.

  Have reset you your router recently? or replaced different model?

  Try to remove the old connection then recornect...

  http://www.TP-link.com/in/article/?articleid=214

  Concerning

  GT4U

• Power Save Polling (PSP) leads to problems in connection with some access points

  Symptoms:
  The following symptoms may be seen if an access point Wi - Fi (AP) or router Wi - Fi broadband does not properly support the Power Save Polling (PSP) feature:

  • Intermittent loss of Wi - Fi
  • Unable to open a connection Wi - Fi
  • Poor Wi - Fi connection data performance

  These symptoms may be more pronounced when on battery.

  Cause:
  The PSP mode is a feature that provides the long battery life for laptops. It requires coordination between the AP or router and the Wi - Fi adapter. Intel has discovered that some APs or routers may not implement the feature correctly or completely.

  Socorro

  Heard different things people try, depending on their wireless adapter.

  Start, control panel, device, netowrk, their adapter, power management Manager. Clear the checkbox to allow windows to turn off this device to save power

  Start, control panel, device, netowrk, their adapter, advanced management. Looking for antenna diversity. Some cards have it and others don't. Replace the Auto antenna by supply diversity

  Some have disabled Wireless N of their card and achieved good results.

  Some Wireless N adapters operate ONLY on the 2.4 GHz frequency.

  Using these parameters of the recommended wireless router I use channel 11, have GREAT results. I usually recommend creating a new SSID to make the connection easier. Wireless devices also needs to connect to the NEW network.

  Rick

• AE1000 now the connection with limited access

  
  

  He got working after the last restart.

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• To access the befw11s4v4 with active e4200

  I have a Motorola modem cable with switch 8 ports, connected on it. I have also E4200 and BEFW11s4v4 connected to the switch. I used BEFW mainly ports to connect my directv box and blu - ray DVD player to the internet in another room.  I noticed a very good signal from befw11s4v4. I would like to turn it off or use the wifi b, but I forgot the password to it and I can not install befw11s4v4 with active E4200. (192.168.1.1 is taken by e4200). How can she (befw11s4v4)?  I don't want to reset befw11s4v4 because that would make its unsecured wifi. Can I use a laptop computer to install befw11s4v4 and change its IP 192.168.2.1 address, for example, but I would like to power access time (E4200 and befw11s4v4) to my desktop PC. Any advice will be greatly appreciated.

  Thanks for your reply. Of course, I couldn't access two gateways with one LAN port on my desktop at the same time. I have connected my laptop to BEFW so I was able to transform the 'b's broadcast, which was not connect in any case. I use my old router BEFW for 'tax' reasons, it works very well with my directv box and blu - ray. Don't want to spend the money immediately on another switch or run another 50 ft. of cable.

• BI Publisher with Active Directory - slow connection

  Hello, I was wondering if anyone had to set up BI Publisher with Active directory. We are on 11.1.1.1.7 OBIEE - integrated with Active Directory. It takes about 40-50 seconds to connect on:

  http://bnrbidevapp1.es.gwu.edu:9704 / xmlpserver

  
  

  We have a different BEEP workigng insanance, they are also connected to the same ad and the connection is instant. What I can adjust? Checked memory and RAM on the system, doubled the RAM, so its double the system that has instant access. What else can I check? Thank you!

  This followed and it is resolved:

  http://www.peakindicators.com/files/document/33/Oracle%20bi%2011g%20-%20active%20directory%20authentication.PDF

• Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

  Hi all

  I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

  Thank you.

  Hello

  Here the material is ok.
  You must disable for the Wlan to save energy.
  You can do it in 7 QL power management.
  In addition, go to-WLan card-> properties > Device Manager
  You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">