First aid found corruption that needs to be repaired.

Similar Questions

• Recovery running of first aid questions

  I have an iMac with disc Fusion. I ran the first aid on the part of the disc SSD and he said "first aid found corruption that needs to be repaired. To repair the boot volume, run first aid recovery. »

  So I restarted the iMac and kept pressed Cmd - R to enter recovery mode. Once there, I opened disk utility, select the SSD and ran first aid. Even though I am in recovery mode, I always get the message saying "first aid found corruption that needs to be repaired. To repair the boot volume, run first aid recovery. Click OK to continue. "When I click on done, nothing happens, same as when I was booted up normally.

  Is there another method, that I can try? And Yes, I am definitely in recovery mode...

  Thanks for the help!

  FWIW, if you see the SSD and HDD in disk utility means that your merger drive is merged is no longer. You can try the race as first aid on the upper level of the drive in Recovery Mode but make sure that everything is backed up first.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• Got a big window that opens indicating 28 (?) virus/infections found and I need to reconfigure / sign up for XP Home Security

  Got a big window that opens indicating 28 (?) virus/infections found and I need to reconfigure / sign up for XP Home Security and allow him to get rid of these infections. Never recorded this before scan. It doesn't let me go anywhere to check anything, can not access the internet, continues to say that you are infected, danger danger, for example. Turned it all off, the computer restarts. Can't do anything with it... Guess I need to take it to someone who can remove the pop up? I have nothing works, it will open a homepage for a second then throw it and packaged pop in front of everyone. Try adware and spybot and windows defender. He stops adware running and sends an error message that it stopped unexpectedly.  Windows Defender shows no abnormalities.  Never had any problems with this desktop computer... used mostly for commercial sites, not a lot of surfing, etc. made. No matter what?

  Hello

  This malware has many names and XP Home Security 2011 is one of them.
  
  XP Antispyware 2011, Vista Security 2011 and Win 7 Internet Security 2011 rogue change name are
  fake antivirus, a scam to you force to pay for them while they have no advantage at all.

  Uninstall XP Antispyware 2011 and the security of Vista 2011, Win 7 Internet Security 2011 (Uninstall Guide)
  <-- read="" this="">
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put - right-click on it - RUN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  RUN - type in the box-> MRT.exe

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put - right-click on it - RUN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put - right-click on it - RUN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google for
  see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures you have taken
  (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Common cold called the India telling me that my computer is corrupt and needs attention at a cost. The call of this morning came from 02533639006.

  Please could someone tell me if the calls of the India telling me this computer is corrupt and needs attention to the cost are to be considered as a suspect.

  This morning, my husband took one of the many calls from a company whose name can never be clearly understood.  Call came this morning from the above mentioned phone no.  It was a particularly tough call, insisting that they knew there was corruption on my system and when my husband asked for the source of this information and how they would take care and at what cost, the appellant insisted to know the age of my husband.  When he asked the appellant to bring the problems that he was speaking in an e-mail that he rang off the coast.

  As has happened so often before, could someone please let me know what steps I should take to ensure that all information on the State of operation of my computer is genuine and comes from a reliable source.  My husband and I are retired and is concerned by the number of calls we receive from this type.  We had an audit by computer not so long ago and everything was there at that time.  Despite the running is a little slow, I don't have serious problems that I know.  I learned to be patient when waiting for the computer to operate as required.

  I look forward to hear from you in due course.

  Thank you very much.

  It's FAKE and SCAM, because of course, you could report it to the Ministry in charge of fraud in your country.

  Take a look on:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

• How can I configure FF to start typing before? Such as if I am on a Web Site that needs my personal info, I put in the first letter of my email and FF puts the rest?

  How can I configure Firefox to start typing before? Such as if I am on a Web Site that needs my personal info, I put in the first letter of my e-mail and Firefox puts in the rest of the letters? IE has implemented this. It makes just so typing more easy to personal information.

  Firefox has a 'rudimentary' fill or "AutoComplete" feature, which is linked to the history of form and research.

  https://support.Mozilla.org/en-us/KB/control-whether-Firefox-automatically-fills-forms

  https://support.Mozilla.org/en-us/KB/Firefox-doesn ' t-economy-web-form-entries

  Users should be cautious to they clear recent history what they deselect Form & Search History; This data is stored in its own cache and not saved in a data file.

  As Fred mentioned, using an 'auto fill' extension is preferred by many users. This type of extension allows user implement their data of a personal nature and then to have this 'auto fill' information as required on the Web page "Forms."

  Currently, the most popular "auto-fill" extension seems to have disappeared of Addons,Mozilla.Org site in the last day or two. I had seen a number of threads of support on a compatibility issue in Firefox 50 with this extension; and I suspect that the developer he shot the AMO site. Not sure if this developer will solve the compatibility problem (probably several processes) prepares a new extension to the new format of WebExtensions, or that it is right to give up with his "auto-fill" extension I saw it listed in the AMO Tuesday; Today, it's gone.

  Personally, I have little use for this type of extension, but I don't use and provide suggestions of development (aka criticize what they were doing, FRO the view of "long term user") for a "auto-fill" extension of return in 2004 in the run-up to the release of Firefox 1.0. These developers have created what I would call an add-on "cutting edge", but ran into problems of compatibility silly every week because of Mozilla. And by the time Firefox 1.5 came out 6 months later and 1.5 changes to this extension, developers just gave and 'we' lost this particular extension. After using the 'ultimate auto-fill' extension I've tried a few others, but they have failed in comparison; and since my need was not great I just stuck with the function 'auto' by default.

  It's a real shame that Mozilla has not seen fit to extend these basic features "AutoComplete" over the past 10 years; but hey, it's software development! Redo the UI repeatedly and ignore the basic features; who looks better on a RESUME "as"scut"work that few potential employers will enjoy.

• Utility disk first aid indicates that it is a wrong number of hard file links

  After various software update yesterday the Mac mini has had several problems. I ran disk utility first aid, and he says 'wrong number of hard file links.

  Which allows to fix this?

  The drive has been successful to repair by disk utility?

  You must boot from recovery to repair the startup disk

  OS X: on OS X Recovery - Apple Support

  What problems did you have?

• I can not fire first aid in Recovery Mode

  I upgraded to Sierra this afternoon. Because I'm disorder obsessive-compulsive, I ran first aid on Macintosh HD, despite the quite well running system. Said disk utility it found corruption, and should I run first aid in Recovery Mode. I restart, press command + R and go into Recovery Mode. I open disk utility, but I can't select "Macintosh HD" to perform first aid. It is grayed out.

  How can I select Macintosh HD in Recovery Mode to run first aid?

  When mode of recovery, that on the mac? (Apple menu, about this mac)

  have you tried r instead of command + R?

  You have a time machine backup drive? If so, can you boot option for that?

• First aid disk utility

  I just ran disk utility first aid.  At the end he said "operation completed successfully" but just before which is has a few lines that I thought were unresolved.  Is this ok?

  Several lines first to check different things, then this...

  Down keys

  Down keys

  Missing thread record (id = 75075057)

  The Macintosh HD volume was found damaged and must be repaired.

  File system check exit code is 8.

  Successful operation.

  It is not his success for me.   Is this ok? Do I need to do something.

  You want to update this.  As a beginner with this tech stuff, I thought I'd do first aid has been only when the computer is running.  I've since read that you run you reboot with 'command + R' starts upward.  Chose my hard drive, then ran the disk recovery and first aid to repair, he ran and repair the hard drive.  Then restart chose this screen, now is doing well!

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• Cannot find the 'first aid' in the Keychain Access application

  Hello

  After experiencing a few problems with the keychain (several programs asking for lokal objects access all of a sudden - change the pw days) I browsed the net and found several reference to use "first aid" ind the Keychain Access app.

  Yet, I could be too stupid, that I can't find anywhere in the menu. And I have all the scanned several times

  He has changed lately? Is this a known issue

  Version used:

  OS X 10.11.2.

  Any help much appreciated

  First aid for trousseau has been removed in 10.11.2, because of a "security breach". Working with the support technique apple about this problem, you will essentially have to manually perform certain actions same as first aid carried out, namely synchronize your password. Local release and change the password, what should change for everything the.

• Can not start up and the utility disk first aid failed

  I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp.   This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point.  I tried new and same problem.  So I checked if I could go back to Windows and ran 10 Windows without problem.  Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:

  -Previous ID in a string of hard link is incorrect (ID =-1130612101)

  (it should be 3164355194 instead of 0)

  Several of the above errors appeared with different numbers

  -Volume bitmap minor meds of repair for orphans blocks

  -County of block free invalid volume

  -Volume header needs minor repairs

  -Lack of notice of thread (id =-1130634630)

  Several of the above errors appeared with different numbers

  Finally the process 'done' with the 'first aid process has failed.  If possible to backup the data on this volume.

  Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it.  Tried to run disk utility and first aid in vain as above.

  So here are the questions.

  1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?

  2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?

  3. I have a Time Machine backup. restore it re - will present the same problem?

  4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem.  Should I assume that the drive itself is defective and have it replaced?  I ran an Apple Hardware Test and were not problems.

  1 fix

  2. Yes

  3 NO.

  4 NO.

  Back up all data on this disc, including your Bootcamp partition.

• First AID (10.11): "impossible to turn up the volume for the repair, the operation failed."

  Hello everyone

  I think I'm in trouble here...

  After I did a clean install of 10.11 two weeks ago, my Mac Pro 3.1 (2008) began to take a long time to boot up to the desktop. The actual load of the operating system (with the progress bar) is fast, but it takes a while (minutes) to enter my password until the computer is accessible at the level of the office. I have almost nothing the autostart value in Sys Prefs users.

  The startup disk is two SSDs over a Sonnet Tempo Pro and the folder of the user is on a separate HARD disk.

  Because the slow pace is the point where to enter the password, I thought that there could be a problem with the folder of the user HARD drive. I had my user folder on a HDD separated for the last several iterations OS X without problem, but in the fall, I needed more space and bought two new 3 TB drives (one for the clone SuperDuper). They ran very well in the Mavericks.

  When I run THE first AID on the volume that contains the folder of the user, I get the following error (it does not appear if I run first aid on the HARD drive itself):

  "First aid process has failed. Save if possible data on this volume. "The details section of the dialog box reads:

  "Update support partition for the volume to the need

  Impossible to disassemble for repair volume

  Operation failed... »

  Worrying, I get the same error if I run first aid on the volume of the other 3 TB drive that holds the user folder SuperDuper clone.

  I suppose that the two new 3 TB drives may be failing at the same time, but it seems a bit unlikely. Does anyone have an idea of what other causes, there could be for these errors?

  I would be very grateful for any help, as this is my main machine. Thank you in advance,

  EDIT: I realize I should have posted this in the OS X El Cap - my apologies for this forum. Also, I find this recent thread that seems to suggest that there is a bug in Dug, I get the same errors when I run first aid on my other two internal drives.

  Philippe

  BTW, I tried to start in safe mode, but that has not changed anything. Also, I created a test (with the record on the striped SSD) account. Representing loads very fast after that I entered the password.

  Thanks in advance again

  Philippe

• Windows resource protection found corrupt files but was unable to solve some of them.

  I have several problems with my computer; I used to have Skype and I bought a new logitech camera, but since I installed it I can't update of java, adobe, yahoo, etc. so I uninstall my camera to see if it was the problem, but since I did that Skype has not worked agaain, an apears to error saying that there is a problem with the package windows install , I have read in this forum and find I had need windows install clean up utility so I downloaded, but did not work, when I used comand promp and scan my computer this apears

  Windows resource protection found corrupt files but was unable to solve some of them. Details can be found in CBS. Journal windir\logs\CBS\CBS.log. for example, C:\windows\Logs\CBS\CBS. Journal

  C:\windows\sistem 32 >

  can someone help me please! Thank you.

  HI Margaret,

  Thank you for your message.

  Looks like you have a virus or malware causing corruption.

  I suggest to update your Kaspersky Anti-virus definitions and run a full scan of the system.

  Also, make sure here's you have the Vista disc in the drive when you run SFC, where it gets the correct file information.

  Alternatively, you can try to perform a clean boot before you attempt to run SFC, to see if a startup program may conflict with it:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.