First Calculator in radians?

Similar Questions

• HP question first calculator spreadsheet App

  On the first HP Calculator spreadsheet application, is it possible to use the logic = IF() as you can with a typical spreadsheet? All I want to do is simply check if a cell is a 1 or 2, then convert them accordingly. Simply if 1, add these two cells, if NOT, add a different set of cells.

  Yes, it is quite possible. The command you need is XAVIER.

  For example, = IFTE(A1==1,"Yes","No")

• HP question first calculator spreadsheet App on data entry

  On my current spreadsheet that I work on (and in fact, this question would apply to these 2 cards I have to do as well)... I have my column A implemented as labels and my column B put in place as input. So A1 tells me what type of input B1 is expected, and A2 tells me what type of entry B2 is pregnant and so on.

  When I enter data in B1 and press ENTER, instead of going to B2, happening to cell C1. So I have to press the arrow and arrow to the left to reach the cell B2. And this gene continues for B2, B3, B4, B5 and so on. Is it possible to set an option so that when I integrate the data in B1 and press ENTER, it will go to B2 and B3 and so on?

  Unrelated to the above, but another question concerning the application of the worksheet. Is there a way to set the FILL color of the cell based on an IFTE()? By default, I want the FILL color to be WHITE (by default). But, in this case particularly, IF the cell B4 has a value greater than B1, I want to change the FILL color for, perhaps, red to warn me that values have been placed "backwards".

  Regarding your first question, use the menu 5 button (which allows to switch between GO↓ and GO→) to select the direction in which you want to go.

  I hope someone can answer your second question!

  DISCLAIMER: I do not work for HP. I'm just another user HP Pime happy.

• Calculate the tangent arc of 0.12 degrees

  Knows ActionScript really get mad sometimes.
  
  I'm trying to calculate the arc tangent of a number.
  I use the following code:
  
  arctg_mi = Math.atan(Math.PI/180 * 0.12)
  
  As you can see, I need calculate the tangent arc of 0.12 degrees. Problem is that it just cannot be done. I'm not an expert in mathematics, but it seems that the radian system does not behave as a system of degrees when it comes to the tangent arc.
  I used the Windows Calculator, and tangent arc of 0.12 to system of degrees is about 6.84, which is just. But when I go to the radian system, then convert 0.12 degrees to radians and then try to calculate, I get an incorrect value. Totally wrong!
  Solution? I'm so stupid that I missed a few ordinary procedure in all this, or these two systems are not comparable.
  Or do I need to convert the value that I return to the system of degrees somehow?
  
  The best thing to do would be to move the Flash to the system of degrees, but which does not, if...
  
  Help, please...

  It comes out to 6.84 in Flash, if you do it right. First, degrees
  by radian is 180/Pi not Pi/180. And you want to get the arctangent of the
  value, that comes out in radians, then convert to degrees - you don't want
  take the arctangent of the degrees...

  So:
  var degreesPerRadian = 180.0 / Math.PI;
  trace (Math.ATAN (0.12) * degreesPerRadian)

  6.84277341263094

  HTH

  --
  Dave-
  Adobe Community Expert
  www.blurredistinction.com
  www.Macromedia.com/support/forums/team_macromedia/

• 50 g: HP 50g is not right graph of trigonometric functions

  Hello, trying to graphical things like Y = SIN(X) and Y = COS(X), Y = TAN (X) mode degrees I get graphics and table results

  that cannot be right.

  Instead of a signal sinusoidal, all I get is an oblique line very shallow. For all cos there is a line above the x-axis. The tangent is the same thing as Sine.

  To put the calculator in Radians mode it does very well, but it is in radians.

  I tried the same parcel on my HP48G using the regular tracer and mathtools, but I always get the same things.

  Is there a setting I have hurt either I put something in incorrectly? Using a Ti-83 (awful piece of tat) it works fine. However, it is part of the worst graphics calculators that I've never used, so I don't want to use it.

  If all the other details are necessary, I can try to give them. Thank you.

  Is there a setting I have hurt either I put something in incorrectly?

  The problem is probably caused by incorrect setting "window."  Press down the shift to the left and holding it down, press the F2 key (see 'WIN', which stands for 'window').  Make sure now the H-view (view horizontal, that is, the values of axis x on the left and right of your screen edges) are reasonable for the degree path mode.  Try something like-360 and 360, for example.  This would correspond to a 'window' of - 2pi + 2 pi in radian mode.

  Hope that helps!  DISCLAIMER: I do not work for HP, I'm just another passionate about Calculator HP happy.

• cartridge HP 61 (recharging)? Deskjet 1050 /HP, series J410, discharge printer/scanner

  I bought a hp deskjet 1050 (J410 series) printer/scanner, about 3-4 weeks ago, at Future Shop for $29.99. I used all of the ink in the black cartridge 61 hp, called a local outlet for a large company to fill cartridge and I was told that they could fill up again. They did it.
  
  Now the printer/scanner is displaying the attached message and refuses to print.

  

  What is the opposite of "green"? HP did not hear the words "reduce, reuse and recycle '?
  
  HP is really so short-sighted that they hired printers and cartridges design engineers so that the printer does not work after using the ink in the cartridge?
  
  A new hp deskjet 1050 printer/scanner costs $29.99 at Future Shop. A black hp 61 cartridge costs $19.99. They really matter to the printer go in a landfill after using ink? I used to think product hp product - quality since I bought my first calculator hp 21 more than 35 years ago.
  
  I tried to get rid of the warning (with the 'Close' button disabled) by starting the Task Manager and end the task. but the printer still does not print. Do you know another solution to workaround?

  At this point, I think again the printer & shopping for a better alternative.

  Thank you.

  I would say that if the message comes up again just to say 'no '.   While HP does not fill, they try to crack down on counterfeiting, which sells reloaded cartridges / reman as genuine HP.

  BTW, instead of charging probably taken your cartridge used once and you gave another replacement.  If you had gotten back your printer cartridge would have recognized and do not show this message.  I suggest that contact you the restring a replacement if cleaning the contacts of the cartridge as shown below (for a different series, but the same principle) does not solve the problem.

  On a related note, I gave once a printer at the local high school.  Some time later I received a call from the teacher that he was not working properly.  They had replaced the #57 with a charged cartridge that had the wrong color in yellow (green now).  We got a replacement and had one of the missing colors.  Finally, the third replacement worked.  I asked why they bought refills and the teacher said they were less expensive.  I asked if they have 1/3 of the price...  You get what you pay for.

  BTW, I do not work for HP or represent them, I'm just a volunteer on this forum.

• (HP Premium) How to multiply functions?

  Well, it's my first calculator graphic, in order to not yell at me if I missed something obvious. How I would multiply functions together? Here is an example: (x ^ 2 + 5)(x+3) how I would get the answer? If I try to do it count just x 0.

  Hi!, Speedstang:

  Welcome to Forum!

  In the case of Mode...

  

  Extremum of roots...

  

• Register shift when indexing tables in formula node

  Hello

  I cannot using the node form while my two paintings of indexing.  I'm getting "NaN" for my output array. I think that the problem lies in my shift register.  My guess is that for the first calculation is not a PreviousAngle is why it gives me "NaN."  The first clue, I would like to than the value of PreviousAngle to 0. I'm new to LabView and know what to do.

  Thank you!

  Christian Seymour

  

  A 0 to the N terminal wiring makes no sense. A for loop will iterate for the smallest N or the size of the array. Don't wire anything to N.

• Global variable: continuous change

  Hello

  I have some problems with a program of VI. I am creating a program when a start of the X variable with an initial for a few Ms value then this variable should be used in another while loop, and value must be changing continuously after some calculations. I use it just for the first calculation, and then it changes constantly other calculations.
  Perhaps a global variable must be used, but I'm not sure.

  I found this tutorial, is it helpful for this problem?
  http://www.NI.com/white-paper/7585/en/

  Thank you.

  
  

• Psychrometric charts using in Labview to calculate moisture?

  I built a hygrometer to mirror cooled for a school project and all control through labview. I'll have the dew point and the temperature of the dry dry bulb that I need to calculate the rate of moisture through an algorithm or a look up table psychrometric charts. can anyone help please.

  The necessary equations to calculate the relative humidity of pressure and dry and wet bulb temperature can be found here:
  http://www.SRH.NOAA.gov/ELP/wxcalc/formulas/rhTdFromWetBulb.html
  With both temperatures and pressure to come as long as variables, I would break just calculating what they have on the Web page linked, by first calculating the pressure of saturated steam and wet bulb ==> and then calculate the actual vapour pressure ==> then the relative humidity. All operators you need for these calculations must be under the function of mathematical operators range. You could call all individual operations, including the exponentials, or just use a few knots of formula.
  Of course, just dump everything in a while loop (with a delay), to make the system constantly monitor and update the moisture.

• Help with the hidden field formula

  I have a table in the Acrobat document:

  1 box = data of registration of the user

  Box 2 = user registration data

  Box 3 = user registration data

  Box 4 = (box 1 * Box2 * Box3)

  Box 5 = the user's registration data

  Box (box 4 - box of 5) (6)

  The problem:

  During this table opens in the document all the fields must be blank for printing purposes.

  However, all fields are for a person to enter data, and then print to convenvience.

  What I need help on, creates a script that allows the box 4 and 6 box remain empty but also to fulfill their function and display a value of 0 if the service is validated as true.

  Example:

  Zone 1 = 2

  Area 2 = 2

  Zone 3 = 0

  Box 4 = (box 1 * Box2 * Box3) = 0

  Box 5 = 0

  Box 6 = (box 4 - box of 5) = 0

  Can someone help me with this? Let me know if other explanation or screenshots are needed.

  Thank you.

  You say that you only want to show a zero value in the computed fields if all entry fields are not empty, and the calculation result is zero? If so, a custom for the first calculation script could be something like:

  (function () {}

  Get the values of field as strings

  var v1 = getField("Box_1").valueAsString;

  var v2 = getField("Box_2").valueAsString;

  var v3 = getField("Box_3").valueAsString;

  If (v1 & v2 & v3) {}

  Perform the calculation

  Event.Value = v1 * v2 * v3;

  } else {}

  Event.Value = "";

  }

  })();

  The script for one another might be:

  (function () {}

  Get the values of field as strings

  var v1 = getField("Box_4").valueAsString;

  var v2 = getField("Box_5").valueAsString;

  If (v1 & v2) {}

  Perform the calculation

  Event.Value = v1 - + v2;

  } else {}

  Event.Value = "";

  }

  })();

• Write an equation in JavaScript for a loan agreement

  Hello

  I can't put an equation in the form of JavaScript. I'm trying to calculate how much a loan will cost a fixed interest for a period of time.

  So we have the equation: estimated current value = (1 + InterestRate) ^ LoanTerm

  With the fields in my form, I think that it would look like this: Ttl = AmountFinanced (1 + rate) ^ NumberofPaymentsRow1

  My JavaScript for my form named "Ttl" currently looks like this: AmountFinanced * Math.pow (1 + rate, NumberofPaymentsRow1)

  -Unfortunately, it does not return a value, and I'm out of ideas. I don't know where I'm wrong and any help would be appreciated.

  

  You get the errors arise?

  Have you checked the JavaScript console to find errors?

  The custom JavaScript calculation option requires the complete JavaScript coding and is not a front-end process collection of treatment parameters as the first calculation of two options. You must write the JavaScript complete not one shortened.

  JavaScript is an object oriented language, you will need to connect to a domain object until you can access the value property of the field. You must use the 'doc.getField (cName)' method to acquire the field object.

  You must also specify the target or object where you want to place the result.

  Event.Value = this.getField("AmountFinanced").value * Math.pow (1 + this.getFieldI "spleen '") .value, this.getField("NumberofPaymentsRow1").value);

  Note that JavaScript is case-sensitive for domain names, function names, variable names, etc.

• Problem with ESXi 4.0 with Allocation of disk on a virtual computer

  Hello Experts

  Physical server:

  HP DL 380 2 proc Intel Xeon 4 GB RAM

  6 x 146 GB HDD (with RAID5) = > total available capacity 650 GB

  Problem:

  I am creating a VM with OS = DEBIAN6

  When I allocate 300 GB HARD drive for the virtual machine, it gives me just 256GB.

  I don't understand the reason.

  I read that this could be linked to the BLOCK SIZE.

  What is your opinion? If so, how can I change the block size?

  Thanks in advance

  Options of your choice after.

  Block size of 1 MB = Max VMDK 256 GB

  2MB block size = Max VMDK 512 GB

  4MB block size = Max VMDK 1024 GB

  Block size of 8MB = Max VMDK 2048 GB

  First calculation of disk space when set up 2 MB to 512 GB.

• Find the occurrence of the word in a list separated by commas

  Hello
  
  I need to find the first occurrence of a word in a list separated by commas.
  
  Example list:

  monster,daemon,shark,bambi,sky

  Now I'm looking for the word: bambi
  Result should be the first calculation of the event: 4
  
  Now I'm looking for the word: Monster
  Result should be the first calculation of the event: 1
  
  Hope you can help.
  
  Tobias

  Hi, Tobias,.

  This can be more efficient, because it does not use CONNECT BY or regular expressions. Instead of splitting the string to the level of every comma, just find the target string and count how many commas occur in front of her.

  WITH     got_found_pos          AS
  (
       SELECT     list_txt
       ,     INSTR ( ',' || list_txt || ','
                  , ',bambi,'
                  )          AS found_pos
       FROM    table_x
  )
  SELECT     list_txt
  ,     found_pos + 1
              - LENGTH ( REPLACE ( SUBSTR (list_txt, 1, found_pos)
                                    , ','
                           )
                    )          AS item_num
  ,     found_pos
  FROM    got_found_pos
  WHERE     found_pos     > 0
  ;
  

  Delimited lsits storage is usually a bad idea in a relational database. It is best to store each item in the list on a separate line.

• Is it possible to script an image to open it after another field reached a certain value?

  I have very little programming knowledge.  I was wondering if I had two calculations that would be compared with each other.  When the second total is equal to the first calculation, it is possible to open an image?  (Like the flowers that say "Congratulations!")

  It is an autonomous form that is not connected to any source of data.

  Thank you

  Christina in Tucson

  poundsOn_Off.rawValue returns the value in the string format that can not be compared with a number.

  Then, use the following syntax to convert the string to a number value.

  If (parseInt (poundsOn_Off.rawValue) > 1 & parseInt (poundsOn_Off.rawValue))<>

  {

  a logic

  } else

  {

  //...

  }

  Nith