50 g: HP 50g is not right graph of trigonometric functions

Similar Questions

• Satellite M30-S309 - certain proportions on external monitor not right

  Hello world.

  I have a Satellite M30-S309 that I just started to use it with an external monitor: a 191EW9 of Philips, which has a maximum resolution of 1368 x 768. The built-in monitor is 16 "; the new external monitor is 18.5 ".
  The computer has the driver for the new monitor, but with a few photos of the proportions are obviously not right.

  Anyone know of any way to solve this problem? Or it's an old computer like this all simply not up to handle this type of monitor?

  A solution would be much appreciated.

  Hello

  Can you please explain what you mean with certain proportions are not suitable?
  You can choose the native screen resolution of the external display or use another resolution of the screen?

  To me that sounds like this, you use a wrong setting. On the screen you can change the width, height and to this day. You should check these options.

  Welcome them

• j105el envy: envy of hp can not right and made a left click at the same time

  my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

  @gwatanaj ,

  Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

  If you need help please post back.  First of all, check out this link.

  Tips for the "very best question.

  So, please indicate your model full and product number.

  I hope hear from you soon.

  Thanks again and have a great day.

• Printer prints is not right. Does not print not multiple copies.

  Printer prints is not right!

  I have a new epson printer to HP 2004 512 MB ram desktop pc; printer does not print several pages such as bank statement and other sites where need a lot of printed pages?   Help

  Hi Howard,.

  ·         What is the model number of the printer?

  ·         You receive an error?

  Check to see if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Problems printing and printing errors

  Method 2: Follow the steps in the article mentioned below.

  Printer in Windows problems

  Method 3:

  Step 1: Uninstall the printer and install again.

  Microsoft Windows XP - remove a printer

  Microsoft Windows XP - add a printer attached to your computer

  Step 2:  Install the drivers for download from the Web site manufacturer rather than using the disc.

• Can not right click on elements 2015.3 mounting

  installed more recent adobe pro update first and now can NOT right click on clips in my calendar. I uninstalled and reinstalled and still have the same question. I can't right click on the components of the package. I CAN right click in the bins thougth. Frustrating!

  Laz. Abalos

  Hey Laz.

  It's weird, but it seems that it may have to do with your workspace. Please create a bug report so that we can get this thing fixed.

  Thank you
  Kevin

• Am I not right in Dreamweaver version 13.1 or 13.2?  If I am, how can I get it?

  I bought Dreamweaver CS6, a few months after that he is out (student/teacher Version) on DVD and installed on my desktop and laptop. Am I not right in Dreamweaver version 13.1 or 13.2?  If I am, how can I get it?  I have to start all over again with creative cloud? (I was really hoping to avoid CC)...

  Thank you

  
  Dave

  Unfortunately, DW CS6 (ver 12) purchased on a perpetual license (DVD) is not eligible for the modernization of DW CC (13).  You must subscribe to the cloud of Creative.

  Nancy O.

• ESXi 4 Installable not right in the image of the Linux tools?

  Hi people,

  Well, I'm very frustrated with VMWare (lack of) support at this stage. I registered for and got a free download of ESXi 4 Installable. Because of the prompt that I install, I need to access the image Alternative VMWare Tools CD for Linux guest operating systems as mentioned in the manual. It does not seem possible, however. The URL to download it gives a warning 'no access '.

  I filed a support ticket with the following text:

  & gt; I asked and got licensed 4 ESXi Installable by filling the

  & gt; forms on your site. Because of my guest operating system should I need download VMware

  & gt; Guest tools for operating systems Linux CD image. However this URL

  & gt; http://downloads.VMware.com/download/download.do?downloadGroup=ESXI40 said

  & gt; that I do not have access. How can I access download the ISO? -What

  & gt; available for paying customers?

  and received a notice saying:

  & gt; We have re-entered your ESXi version on your account and could solve

  & gt; your question. You can now download the ISO file via:

  & gt; http://downloads.VMware.com/download/download.do?downloadGroup=ESXI40

  Of course, it did not work.  So, I reopened the ticket and told me:

  & gt; I have been advised that you should contact our team of license under

  & gt; [[email protected]] for that matter.

  So I reached out to this address and received this response:

  & gt; My name is XXXX XXXX and I will assume ownership of your

  & gt; Support demand, # and work with you to solve this problem

  & gt; issue.

  & gt; If I understand correctly notes request for assistance, the question that you are

  & gt; challenging is assistance downloading the VMWare Tools CD

  & gt; image for Linux guest OS that must be supplied in ESXi 4.

  & gt; This is a technical question and you do not have a valid support.

  & gt; I would say to see this link http://communities.vmware.com/community/vmtn/vsphere/esxi?view=discussions & numResults = 15

  & gt; You can ask questions in the forum.

  I don't think it's a question of forum, but: no matter who else could download the image tools? Should what email address I go to get my account setup properly? Or, if someone can confirm that ESXi 4 installable free licenses not right in the image of other tools?

  The download will offer different versions of VMware Tools, then you get on the ESXi installation.  You could try to sign for a vSphere eval to access the page.  If this does not work, send me a PM and I'll follow up with someone on getting that fixed.

• How can I remove the documents from my iPad added when it was running regular Acrobat, now that happened in DC?  The docs are not on the cloud, and DC does not appear to be a function of deletion for non-cloud docs.

  I use an iPad.  It switches me automatically in Acrobat outdated in DC.  How can I remove the documents that have been on my iPad with the old Acrobat?  They are not in the cloud, and DC does not appear to be a function of deletion for them.

  Hello

  By default, Acrobat DC IOS shows the consulted files recently.  You need to switch to another file location (for example, Local, Document cloud creative) to delete, rename, move or duplicate files.

  You can switch to the Local, if you do not want the files and folders that are stored locally on your iPad.

  Do you want to take a look at the following document to see how you can switch to another file location and delete the files?

  How to manage files Acrobat DC for iOS

  Please let us know if you have any additional questions.  Thank you.

• Screen Samsung Syncmaster not right

  I just bought a new HP Pavilion with Windows 8.1.  He has a card NVIDIA GeForce GT 705.  I use two comes a HannsG HZ281 and a Samsung Syncmaster T260HD.  I can not get the correct display on the Syncmaster.  The HannsG is good at 1920 x 1200 (native), but the Syncmaster is disabled using native 1920 x 1080.  I can't find a way to make the right Syncmaster look.  The same two monitors were on my previous machine, and everything worked as it should.  Does anyone have a suggestion as to why the Hazel Syncmaster is now?  The HannsG is a DVI connection and the Syncmaster is a HDMI connection, exactly as it was on the computer Windows 7 HP.

  It is an update of my display problem.  Installation of a DVI - D splitter, such as recommended by HP technician has not solved my problem.  I could get the monitor2 HannsG 2 running at a resolution of 1920 x 1200, but I could not extend the desktop all the monitors.  It is not useful to have two monitors showing exactly the same thing.

  I decided to buy another graphics card identical to one I use at the office, running the same screens HannsG 1920 x 1200.  It works very well using a DVI - D and HDMI port, both running at 1920 x 1200 (native resolution) monitors, and the appearance on screen of text is greater than what I have now.  I found one on Ebay at a reasonable price and bought it.

  Given that I have to wait a week or two to get the card, and I had time to burn right now, I decided to do some more experiments with my current graphics card and monitors.  Long story short, I found a solution to get two monitors to run 1920 x 1200 with the extended desktop.  I tried many things and finally found (by trial and error) that if I plugged a HannsG until port DVI - D on the map and the second HannsG HDMI port, but with a HDMI adapter to DVI - D, then connected the adapter to the DVI - D on the second monitor port and manually set the second monitor DVI input (using the monitor built in adjustments via its Menu) , I was able to sove my display problems.  VOILA!  Note: the key to the second monitor (using the card's HDMI port) was to disable the function of automatic selection of entry of the monitor and lock it at the entrance, DVI using the selections menu the monitor's built-in (and this was a whole other bag of worms).

  The screen appearance is now satisfactory, but not as good as my desktop machine.   I can always swap the NVIDIA GeForce 705 in my computer now with the AMD ATI Radeon 7570, I bought on Ebay.  In any case, I learned at a suitable location with my monitors.

  I hope that HP will take note of what I have done and add it to their litany of canned solutions, that they pass on to their novice technicians.

• Setting Menu go left not right

  When I right click to bring up the contextual menu and the submenus in the menu in any window, I opened, it goes to the left and not to the right as it normally should. It is very annoying for me because I'm used to the menu to the right.

  Does anyone know how to fix this? A reg edit perhaps.

  I tried to change my mouse for left-handed, then again right right-handed, but that did not fix my problem.

  I'm running Windows 7 Ultimate retail.

  Thanks for any help,

  Duff

  Hi Duff

  There are a few problems with this behavior. First of all, if you are clicking very near the right edge of the screen, the drop-down menus will appear left everything simply because there is not enough room on the right side of the menu.

  The other problem is that the parameter 'Handedness' has become corrupted or changed. To change this, follow these steps.

  Press the Windows key + R to bring up the Run dialog box. In the open line, copy / paste the following text.

  Shell: {80F3F1D5-FECA-45F3-BC32-752C152E456E}

  Press OK.

  This will start the configuration of the Tablet PC settings dialog (even if you don't have a Tablet PC).

  Select the other tab.

  In the right-handed/left-handed section, place a check in the option Left Handed .

  Click OK.

  This should place the menus on the right side.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Not acting quick selection tool is not right

  My 'quick selection' tool works like the tool "polygonal Selection. What Miss me? It worked fine until this morning. I inadvertently change something?

  Hi Phelpsy,

  Check the size of the brush for quick selection.

  

  If this does not help, reset the quick selection tool.

  To reset the tool:

  1. Select Selection fast Tool.tool

  2. right click / Control click on the drop-down list at the top and choose Reset tool

  3. Restart Photoshop

  

  Kind regards

  Assani

• Rotate text around a circle. Selected selected arc options of Warp, but text is not right?

  With the help of Mac Pro. Have created a vector logo. Everything is good so far. Try to add text to a form of circle around got insofar as the Warp option and typed my text, but despite the scale setting etc. do not look right because it is not flapping in the circle. I tried dragging the anchor points, but which makes it worse!

  Would you mind marking this question as answered, please?

• 2.0 - still not right data recovery

  I know that DR's new, but it * IS * 2 and it's like the 5th patch / revision for this.  Why can't they get it right?

  This may be trivial, but it doesn't look good when things are obviously incorrect.

  

  It's showing 953 GB of capacity.  check.

  Deduplicated 477 GB in size.  check.

  size no-strucure is 7.16 TB?  I am not a math wizard, but it's a REALLY good compression... since it's NON-strucure...

  RParker wrote:

  William Roush wrote:

  Strucure, so probably containing several revisions? (do not know DR however installation)

  I mean the numbers like this one aren't crazy, Linux backup systems that do the same when the majority of your backup bulk is OS and the software that is basically cloned on all machines anyway.

  What do you expect your unique or duplicate ratio of data to be? Is it like VDI or servers?

  Well, I don't know all the numbers, I just thought that it stood out.  with 953 GB of space, we can get more than 7 TB of backup... no-strucure.

  So if you think that this is possible, then I worry about this, I just thought it looked weird.

  It seems a little high, it depends entirely on the side of your infrastructure right and what kind of machines, he composed. If it is 200 machines for VDI (and you do not pay for implementations of older end VDI that do deltas), I'd be like "fully expect", if it is 30 servers of different operating systems and files, I wonder how you got this good deduplication with so many unique blocks. The number of non-strucure is just a calculation of the amount of physical space would be necessary if the deduplication has been disabled, not really have a meaning in terms of physical space used on the drive.

  Well sure, if Dr. allows you to have multiple snapshots stored (again not familiar with it) it is completely expected.

• best practices for maintenance - are my not right?

  OS: Linux
  DB: 11 GR 2, RAC nodes two primary, standby CARS two nodes
  
  We just had an interview, I manually stop backup site (delayed primary log_archive_dest_2_stat), stop crs. However, I have concerns:
  (1) when I stop the two nodes crs, have still one last thing left I can't stop - init.ohasd run:
  
  CRS-2793: stop of the resources managed by Oracle high availability Services on 'qaoracle01' made
  CRS-4133: Oracle high availability Services was arrested.
  [root] # ps - ef | grep d.bin
  root of 16841 16394 0 03:35 pts/0 00:00:00 grep d.bin
  [root] # ps - ef | grep has
  11411 1 root 0 Aug07? 00:00:00 / bin/sh /etc/init.d/init.ohasd run
  root 16846 16394 0 03:35 pts/0 00:00:00 grep has
  
  How to stop this service? Or is it ok to leave for the maintenance of the server that requires restarting the server? Since Oracle documents said only use: crsctl stop crs, I think that it's ok to drop everything.
  
  (2) in order to automate this type of maintenance in the future, can I intergrate dbshutdown in init s/n have not involved in the maintenance of the server?
  
  What is the right steps?
  
  Thanks in advance.

  Yes, I should have.

  Generally, I find these things pretty fast. The fact I'm here makes it almost empty, that we wonder to this topic. That said, here's what I found:

  Automate the starting and stopping of Oracle Real Application Clusters database Instances

  http://docs.Oracle.com/CD/E19396-01/817-6570/opsrac-Admin-ex-79/index.html

  And this:

  Stopping Oracle RAC 11.2.1

  http://www.Oracle-home.ro/Oracle_Database/RAC/shut-down-stop-Oracle-Clusterware.html

  Best regards

  mseberg

• Web site does not not right in Internet Explorer

  Hey all

  I'm new here, so I hope I go about it the right way. For some reason any of a Web site, I work on http://www.coribrantner.com/ is not appear correctly in Internet Explorer. It looks fine in FireFox and Safari, but in IE, just fonts do not work well. They are not bolded when they make or either color. It just seems strange.

  Here is the link again: http://www.coribrantner.com/

  Any suggestions would be greatly appreciated.

  Thank you!

  (1) you use the kind of false document DOCTYPE for the code you are using.

  for example XHTML does not uppercase in tags such as