Problem with ESXi 4.0 with Allocation of disk on a virtual computer

Similar Questions

• Troubleshooting performance problems with the mail server on the virtual computer

  I have a virtual machine with a mail server installed on a windows OS. But all of a sudden, my clients on the server response times decreased significantly.

  This could be the cause of this problem?
  It could be to do with the network, storage, or resources, but I don't know what steps I could take to determine fault

  Would someone mind helping me with the steps I could take to solve this problem?

  Thank you

  The below document page 20 and 21 accurate meters, you should look at the virtual machine level.

  http://www.VMware.com/files/PDF/Exchange_2010_on_VMware_-_Best_Practices_Guide.PDF

  These counters can be used for any virtual computer not only Exchange.  If you are familiar with ESXTOPs I believe that the best way to deep dive in the diagnosis of performance problems.  Also here is a link for these parameters.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008205

  This link takes you to http://communities.vmware.com/docs/DOC-9279 which has the description on the stats.

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  Original title: Put WET on the old computer

  When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

  Hello

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  I suggest you try the procedure described in the link and check if it helps.

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  For more information, please see the links.

  Transfer files and settings from another computer
  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Windows Easy transfer

  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problem with allocating memory collection arraycollection by AddItem

  I have a strange problem with the AddItem method.

  I made a new item with this code:

  ------

  for (var u: int = 0; u < 41; u ++) {}
  Page = new PageToSave();
  project.addPage (page as PageToSave);
  }

  -----

  the project is a distance of class projectblueprint:

  package marcoDoItBetter.utils
  {
  Import mx.collections.ArrayCollection;
  public class ProjectBlueprint
  {
  private var _pages:ArrayCollection;

  public void addPage(page:PageToSave):void
  {
  This._pages. AddItem (page);
  }

  }

  }

  ----

  PageToSave is a class that extends the object.

  When we create the element using the addPages (so with in the collection _pages arraycollection's addItem) programmatically, we have this result using the term Inspector in debug mode.

  It is on the output of the debugger:

  pageList = mx.collections.ArrayCollection (@105cf341)
  [inherited] =
  [0] = marcoDoItBetter.utils.PageToSave (@113cb461)
  [1] = marcoDoItBetter.utils.PageToSave (@113cb401)
  [2] = marcoDoItBetter.utils.PageToSave (@113cb3a1)
  [3] = marcoDoItBetter.utils.PageToSave (@113cb341)
  [4] = marcoDoItBetter.utils.PageToSave (@113cb2e1)
  [5] = marcoDoItBetter.utils.PageToSave (@113cb281) < -.
  [6] = marcoDoItBetter.utils.PageToSave (@113cb221)
  [7] = marcoDoItBetter.utils.PageToSave (@113cb1c1)
  [8] = marcoDoItBetter.utils.PageToSave (@113cb161)
  [9] = marcoDoItBetter.utils.PageToSave (@113cb101)
  [10] = marcoDoItBetter.utils.PageToSave (@113cb0a1)
  [11] = marcoDoItBetter.utils.PageToSave (@113cb041)
  [12] = marcoDoItBetter.utils.PageToSave (@1140dfa1)
  [13] = marcoDoItBetter.utils.PageToSave (@1140df41)
  [14] = marcoDoItBetter.utils.PageToSave (@1140dee1)
  [15] = marcoDoItBetter.utils.PageToSave (@1140de81)
  [16] = marcoDoItBetter.utils.PageToSave (@1140de21)
  [17] = marcoDoItBetter.utils.PageToSave (@1140ddc1)
  [18] = marcoDoItBetter.utils.PageToSave (@1140dd61)
  [19] = marcoDoItBetter.utils.PageToSave (@1140dd01)
  [20] = marcoDoItBetter.utils.PageToSave (@1140dca1)
  [21] = marcoDoItBetter.utils.PageToSave (@1140dc41)
  [22] = marcoDoItBetter.utils.PageToSave (@113cb281) < -.
  [23] = marcoDoItBetter.utils.PageToSave (@1140db81)
  [24] = marcoDoItBetter.utils.PageToSave (@1140db21)
  [25] = marcoDoItBetter.utils.PageToSave (@1140dac1)
  [26] = marcoDoItBetter.utils.PageToSave (@1140da61)
  [27] = marcoDoItBetter.utils.PageToSave (@1140da01)
  [28] = marcoDoItBetter.utils.PageToSave (@1140d9a1)
  [29] = marcoDoItBetter.utils.PageToSave (@1140 d 941)
  [30] = marcoDoItBetter.utils.PageToSave (@1140d8e1)
  [31] = marcoDoItBetter.utils.PageToSave (@1140 d 881)
  [32] = marcoDoItBetter.utils.PageToSave (@1140 d 821)
  [33] = marcoDoItBetter.utils.PageToSave (@1140d7c1)
  [34] = marcoDoItBetter.utils.PageToSave (@1140 d 761)
  [35] = marcoDoItBetter.utils.PageToSave (@1140 d 701)
  [36] = marcoDoItBetter.utils.PageToSave (@1140d6a1)
  [37] = marcoDoItBetter.utils.PageToSave (@1140 d 641)
  [38] = marcoDoItBetter.utils.PageToSave (@1140 d 221)
  [39] = marcoDoItBetter.utils.PageToSave (@1140d5e1)
  [40] = marcoDoItBetter.utils.PageToSave (@1140 d 461)
  source = Array (@1140c9a9)

  as you can see the [5] and the [22] PageToSave id internal flex (or instances of the class has the same address listing.

  "I don't know the exact name of it). It happens totally randomly.

  sometimes fine, sometimes there's more than a duplicate with random address referencing the game.

  I don't want duplicated instances, but I want independent authorities.

  I tried to change addItem with

  This._pages.addItemAt (page, 0);

  Same result.

  I also tried pagina = null before the statement new but same result

  ------

  for (var u: int = 0; u < 41; u ++) {}
  Page = new PageToSave();
  project.addPage (page as PageToSave);

  Page = null;
  }

  -----

  is a garbage collector from?

  How can we solve this problem?

  Thank you

  Hello

  From the looks of it, looks like a bug.

  Are you defining filters or performs a sort on the ArrayCollection collection? Or it's just a pure naked collection instance ArrayCollection.

  Have you tried addItemAt() and got the same result?

  Mike

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problem with a hard disk on the Satellite 1800 750

  Hi all!

  I have problems with my Satellite 1800 750 therefore than the hard drive not to be recognized. Means I can start from floppy disk or CD-ROM, but not hard drive. I create in the hard drive to another laptop and it works well. In the BIOS, I see two (HD and CDROM) IDE devices. From pure DOS diskette and try running fdisk also does not show me the HD.
  What can be? It is a total mistake on card mother IDE #1 have a defect or is it a BIOS problem? Or something else?

  Thanks in advance for any ideas.

  Kind regards
  Werner

  Hi Werner,.

  He cannn be your IDE controller has a loose contact.

  But in a first time, you must set the BIOS to the factory settings. Press ESC key after power! Then you have a short list of commands at the bottom of the screen!

  If this does not solve the problem you correctly a hardware fault. This should be checked by a Toshiba Service partner. Go to https://eu.computers.toshiba-europe.com - support & downloads - find an authorized Service partner

  Rudi Bye

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• Problems with Vista after disk cleanup

  I have problems with my computer. I have Windows Home Basic Edition. I decided to do a disk cleanup on the computer to speed up some. After disk cleanup, all icons on the desktop disappeared. I tried to open the word processor in the start menu, but got a message saying that he had either been moved or was not valid, and the shortcut would be deleted. At this point, I have advanced and restarted my computer. Only, it wouldn't start at all. I got the Windows installation disc and crossed to repair your computer option. It took forever for a kind of diagnosis, but the started computer. My desktop background was black and a folder with my files was missing. I have received a message that my activation code is not authentic or valid. I tried to restore the computer to an earlier time, but that would take forever and doesn't not work even in safe mode. What can I do now?  I barely understand anything in this area. Thank you!

  I was finally able to do a system restore and validate windows. However, all my files, including photos and important documents have been removed. Is it possible to restore these? And is there anything else I should do to prevent it happening again?

• problems with windows update, HP Pavilion, M9077c PC, computer locked up, said incorrect password

  The current problems with Windows update.  My son; computer s, Auto update has not ended.   Got a new set of updated the following day.  He locks up computer because now I get incorrect password message.    Discs to reboot I did before are not recognized.   All solutions?

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  How to use the system restore to log on Windows 7 or Windows Vista when you lose access to an account: http://support.microsoft.com/kb/940765/en-us

  For more information, see the following Microsoft article:

  http://support.Microsoft.com/kb/189126

  Hope the information is useful.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have a problem with the slider to jump on the computer.

  Original title: I'm going crazy typing anything!

  When I start typing my continuous typing to jump around and inserting what I'm typing in the wrong places instead of simply continue typing as it should.  I don't know why or how to fix it, but I'm going crazy typing anything!  If you know how I can fix this help please!

  Thank you!

  Deborah

  Hello Deborah,.

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  When you type, the cursor jumps.

  The problem may occur due to the speed of the pointer mouse inappropriate or if the sensitivity of the touchpad is too high.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you follow these steps:

  Method 1: Hardware store

   

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update mouse drivers

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Change the settings of the mouse pointer.

   

   

  Refer to section to change the mouse pointer works on the site:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-in/Windows7/change-mouse-settings

  Method 4:

  If you use a laptop, change the sensitivity of the touchpad.

  See solving problems with your touchpad in more options in the site:

   

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Problem with the Sharp AR M207 on the computer.

  Separated from this thread.

  I have the same problem, but the thing is that the AR-M207 is a copier, printer and a scanner, the printer driver is correct and I have no problem with printing. the problem is in the scanner driver where my 8.1 64-bit windows is unable to find a driver for the scanner, and it shows a yellow triangle in the devices section and printers in the control panel under the categoruy named Unspecified as in the attached picture.

  So, can you help me to solve this problem, where I searched on my device manufacturing site and I found a scanner for windows 8.1 driver...

  Hi Ali,

  Welcome to the Microsoft community forums.

  Try download and install the drivers for printer manufacturer support.

  http://www.sharpusa.com/customersupport/ProductDownloads.aspx

  1. Click on the link provided above.

  2. Select a product category: MFP & printer

  3. Enter product model: AR-M207

  4. Select a download Type: drivers

  5. Driver platform: Microsoft

  This includes 32-bit and 64-bit drivers. There are two divers for each 64-bit and 32-bit driver. Download and install the drivers. Refer to this link: 32-bit and 64-bit Windows: frequently asked questions

  We have no information if Sharp AR - M207 all-in - One Printer is compatible or not on Microsoft Compatibility Center.

  Check with the manufacturer of the device.

  If you are not able to find the drivers to Windows 8. You can try installing the same drivers in compatibility mode and check if it helps:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• copy a folder with its content on a remote virtual computer

  Hello

  I need your help with a script that I am building. "I need to:

  # to find a virtual computer and see if it is enabled, disabled, or enabled.

  # If it is off and then turn it on and copy a folder with the contents of the VM machine.

  Improvements,

  Michel Vaillancourt

  You'd put it in before, something like this:

  $vmName = 'Target'
  $folderName = 'C:\Folder'
  
  Invoke-VMScript "del $folderName" -vm $vmName -HostCredential $HostCred -GuestCredential $GuestCred -ScriptType "bat"
  
  Get-VM -Name $vmName | where{$_.PowerState -ne 'PoweredOn'} | Start-VM -Confirm:$false
  sleep 30
  
  Copy-VMGuestFile  -LocalToGuest -Source $folderName -Destination $folderName -Confirm:$false
  

  You may need to play with the Invoke-vmscript command more

  $cmd = "del $folderName"
  
  Invoke-VMScript "$cmd" -vm $vmName -HostCredential $HostCred -GuestCredential $GuestCred -ScriptType "bat"