First Elements 9 can save mp4 h.264?

Similar Questions

• First Elements 7 can be split 2 LCD screens?

  Hello

  1 first Elements 7 workspace, etc. divide between 2 LCD screens?

  2 East-GeForce GTS 250 or Quadro NVS or 1700, best or proper to PE7?

  Thank you.

  You should have no problem splitting on two monitors, LCD or CRT display. PE4, there is a limitation, and I think it was the timeline. Don't know if this limitation still exists with PE7. I've shared between 2 21 "CRT (for PrPro), but not as my calendar to be broken by the two monitors, so never use this way. Steve Grisetti can tell you if PE7 still has this limitation with the timeline panel, but you can get everything on the second monitor afer 'disconnect you' them.

  With respect to the GPU, unless you're doing more work NLE, like 3D, the Quadro will be exaggerated. I have one on my desktop and even with light 3D, it's more that I need. Good card, but I probably should have spent the extra of $ for another HARD drive (even if this machine has 6 already). Any card that is capable of double-head will work. Just be sure to check the connections and the specifications for each display. My Quadro will handle anything and everything I need were conversion adapters to drive my CRT.

  I like my nVidia, but lately, there have been problems with Adobe products and new nVidia drivers. The time that Adobe and nVidia are associated, the drivers went south to Adobe products. Go figure? ATI has received good reviews on most of Adobe for one, and their drivers seem to work very well.

  When I do NLE my computer work 17 "laptop, I travel everywhere in me, because I'm used to the double monitors on the floor.

  Good luck

  Hunt

• First Elements 9 can be used simultaneously with Photoshop Elements 8?

  Currently, I have a computer with photoshop elements 8 and elements 8 installed first.

  Unfortunately, the program first elements 8 does not recognize my camera Sony Cybershot video output.  However, one of first items 9.

  If I buy and install the first Elements 9, it will be inegrate with organizer and with Photoshop Elements 8 is the same way the first Elements 8?

  Or it will create 2 organizing separate programs or other compatibility issues?

  Thank you

  Kevin

  Two versions of the software will create two organizing catalogs separated, and you will not be able to export 8 Organizer (slideshows) projects to first Elements 9. But, apart from that, as DurbsLab says, they must live with no problems on the same hard disk.

• Adobe first Elements 9 can't transfer them to my new laptop for college. I need help.

  OK, so I bought 9 EPA a good 2 years to high school and now I'm going into television at the University, I had to buy a newer laptop. My old laptop is going to be wiped by my father (which, I might add, is very eager). I need the program to be transferred to the new laptop... and no, I'm not buying the upgrade for another $100. Can anyone help?

  Just turn on the old machine and install it on the new.

  Mylenium

• First elements 10 HG1920 AVCHD (.m2ts) playback is choppy

  Hello

  Installed first Elements 10 day before yesterday and we tried a small project using my camcorder Panasonic SD900 material. The shots are HG1920 AVCHD (.m2ts) format. When I place them on the My project Panel and play them they are jerjy and shimmering. I tried to play sequences individual back by double clicking it in the task pane, and they play very well. I was given to understand that first Elements 10 can cope with the AVCHD formats. It's early days, but I I'm not at the moment who has impressed with the product.

  Title of the message was edited by: Brett N

  Thanks Neale

  Went to the MT2-H264/1920X1080i 25 AVCHD format and playback was fine

• Can I combine different sequences in first elements?

  Can I combine different sequences in first elements? If this is not the case, what is the best way to save and re - import my sequences to a new project without losing image quality?

  I just of started using this program and made a number of different sequences that it seems easier to work with but now realize that I seem to not be able to combine them and fear that I will lose the quality of image if I export and re-import, on a new sequence.

  flixytime

  Thanks for the reply.

  Project 1... If you have imported the source media, 1080 p (1920 x 1080 @ 29.97 progressive frames per second), use the project preset

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 30 p @29.97

  I exported this Timeline content as

  Publish + share

  Computer

  AVCHD

  with presets = MP4 H.264 1920 x 1080 p30

  so I would like to take this export file (1920 x 1080 p 30 as the H.264.mp4) in

  Project 2...

  that is defined for

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 30 p @29.97

  and continue from there to the final destination (export).

  The program is designed where the project preset is automatically set by the program based on the properties of the first file dragged to the timeline.

  Sometimes the program does it right. Sometimes not. When not, and then you set the project preset manually. Please follow the instructions to do this

  at the bottom of the blog following.

  You can check the project under Menu/project settings to change settings/general and readings for the editing timebase Mode, size of the image, Pixel Aspect Ratio (even if the fields appear dimmed).

  If you do not know the properties of the source media, please tell us the brand/model/parameters of the camera that records video, and we will try to understand the video properties of this information.

  Please read the above. Any questions, please ask. If one of my assumptions are not correct, please let me know and I'll amend my instructions accordingly.

  Thank you.

  RTA

• MP4 kann nicht town looking werden in first elements

  SOS, Leute. Da Premiere Elements meine .ts-Dateien nicht would habe im dem alle video in .mp4 videos konvertiert vlc player. Jetzt kann ich tr e im aufnehme und Organizer betrachten, aber wenn ich sie in first elemets bearbeiten oder ein Projekt einbinden will will be, sehe ich (ohne Fehlermeldung) nur Grünes Flackern uber die approximately Lange videos. has been chewed ich please?

  Karl Diewald

  I can get you a file you can enter organizing items 12 and also import (with no defects) in the first of 12 items Editor. But, it is

  with workarounds...

  1. your original MPEG2.ts must be fully compatible with the editor first of 12 elements. But I can't hold a MPEG2.ts my organizing items 12.

  Besides, I see a problem integrating the organizing elements 12 of any MPEG2 file while I'm not having this problem with organizing items 9, 10 or 11.

  Solution 1. Simply import the MPEG2.ts in first 12 items editor for your project. No thoughts of organizing elements.

  2. I've found that I can produce a very good quality AVCHD.mp4 of the MPEG2.ts using Movie Maker 2012 in Windows 7, 8 or 8.1 64bits.

  I find that I can take this AVCHD.mp4 in the first elements 12 without any problem. However, I can't take this AVCHD.mp4 in

  First 12 items editor except IF I rename the .mov .mp4 file extension.

  Solution 2. For goals in first 12 editor and organizer elements 12, convert your .ts in .mp4 with Movie Maker 2012, change the name of the file to .mov .mp4 extension and then import the .mov in first 12 elements or elements Organizer 12 or both without problem.

  3. maybe one step may be eliminated by converting the .ts in .mov directly with a program such as MPEG Streamclip.

  http://www.squared5.com/

  Problems of Organizer 12 elements seem to go beyond the excuse of the lack of codecs. Still considering what to do with the organizing elements 12 in

  in general. My old troubleshooting shall delete the settings file and create a new catalog don't work... as well as the flexibility to rename

  extensions of files involved and right-click the thumbnail of the elements Organizer and select thumbnail update.

  Please consult the bulletin and consider the foregoing and then let me know if everything above worked for you.

  Right now I'm looking at your ts VLC for conversion .mp4 to try to determine what happened to you with it.

  Later.

  RTA

  Add on... No matter what I do with your VLC H.264.mp4... the file import in first elements 12 change nuanced green or green video. I feel

  the problem is in the video codec used. Replacing the file extension of .mp4, .mov here does not change the situation.

• With the help of first elements 12 for iPhone 5 video, change the publication. MP4 is choppy when the video is moving quickly

  I use first elements 12-day.

  I'm editing iPhone 5 video shot with the following specifications:

  Type: MPEG Movie (.) MOV file extension)

  File size: no more than not not 300 MB

  Image size: 1920 x 1080

  Frame rate: 30.00

  Audio Format: 44100 Hz - compressed - Mono

  Project Audio Format: 44100 Hz - 32 bit floating point - Mono

  Total duration: no more than not not 3 minutes

  Pixel format: 1.0

  Project settings:

  General:

  Editing mode: DSLR

  Time Base: 30.00 FPS

  -Video

  Image size: 1920 1080 horiz Green

  Format of the pixels: Pixels square (1.0)

  Fields: No fields (progressive scan)

  Display format: 30 fps timecode

  -Audio

  Sample rate: 48000 Hz

  Display format: Audio samples

  Capture:

  Capture format: DV

  Video rendering:

  -Previews

  File format: I-Frame only MPEG

  Compressor: MPEG I-Frame

  checked = optimize stills

  If I publish on the desktop and select AVCHD

  choose: MP4 - H264 1920 x 1080 p 30

  File type: H.264

  Image size: 1920 x 1080

  Frequency [fps] of image: 29.97

  Audio: AAC, 160 kbps, 48 kHz, stereo

  File size: 1531,05 MB

  Duration: 6 Min 30,00 s

  The video is choppy, whenever there is a moderate movement.

  During the first reading, it is perfectly smooth.

  All I want to do is be able to share this video on youtube, Facebook and watch it again on my computer of relatively high quality, but I'm willing to make compromises in order to get everyone to play smoothly.

  1st quarter) what should I be out this about accomplish what I just said?

  Q2) video must be only like 3 minutes after that installation but there seem to be 3 minutes of black screen at the end. How can I get rid of this black bit at the end?

  cwsteini

  Unless you have the information in front of you, please download and install the video properties MediaInfo reading program to determine the frequency of images or your video frame rates. Cell phone video is often characterized in variable rate which can (not always) create problems to get imported, video audio out of sync...

  MediaInfo - download reviews and free software - CNET Download.com

  Be on guard for any unwanted alongs carry with the MediaInfo. Excellent program, but those carry alongs can be a major nuisance. The reading of this program will tell constant compared to variable rate.

  Also check the display to confirm that you are working with progressive video and not interlaced.

  If variable rate, the next step would be to take video in brake hand and export it as H.264.mp4 with a rate constant, not variable. Use the median between the min and max.

  We will follow to your results.

  Thank you.

  RTA

• First Elements 10 - made in AVC with AAC audio in an .mp4 container

  For some reason, I am unable to change the rendering formats at all. Only rendering that are not grayed out settings are 'max bit depth' and 'optimize stills '. Everything else compels me to mpegs that I don't want reeeeaally.

  Please can you help me solve this problem so that I can actually change the .mp4s that I was recording with Open Broadcast Software.

  caitlynu

  If your source is 1920 x 1080 @30 frames per second (assumed progressive frames per second), then your preconfiguration of the project should be

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 p 30

  For the export of the same thing, you go to the computer/share/AVCHD with Presets = MP4 H.264 1920 x 1080 p 30

  First 10 items, please see

  

  Have you been there and tried that?

  I will review your wire in the morning morning to follow with more details and comments.

  RTA

• You can simulate a grey graduated filter in first elements 9?

  Hi, I use first elements 9 and you want to create a gradient overlay, gray to darken the sky too bright, but always look natural. It was easy to make a transparent gradient gray in photoshop and save it as a PNG image. It works somewhat by adjusting the opacity but blend modes are not available in elements first and the result is a greyish, not quite natural search sky. Is there a way to get around this? (I would normally use "overlay" mode to do this in Photoshop for stills).

  Philb is just right. The ideal would be a mixture of layer with a color that just overlap the picture. But this isn't a feature of Premiere Elements.

• Need Installer for first 14 elements. Can someone please?

  Need Installer for first 14 elements. Can someone please?

  Hello

  Please see Download Adobe Premiere elements 14, 10, 11, 12, 13

  Let us know if this helps!

• How can I reactivate it first Elements 7 after the reconstruction of PC

  I had to reload XP on my old PC. So that meant that I had to install all software. First Elements 7 installed ok, but the license key is not accepted. How can I reactivate this product?

  Hi Ned

  I used a download from the Adobe site to do the installation. When I run the first it comes up with a box to enter the license key. I entered and tt shows just a red x to the right of the license key. If I click Next it says invalid key, contact technical support. They say it's an expired product and the use of the forum.

  Just sorted. I got I get into the loft and get the original installation discs to do a clean install. He accepts the license as part of the installation and work key. Assume that the download from the Adobe site is updated

• I want to upgrade first element of version 10 to version 14. How can I do? Going to cost me something?

  I want to upgrade first element of version 10 to version 14. How can I do? Going to cost me something?

  Hi patricel61053492,

  You can certainly improve the Premier of 14 items, but it would cost you the upgrade, not the full amount sum to purchase the software.

  You can click on the link here to purchase https://www.adobe.com/cart.html?marketSegment=COM&editSku=65263995&promoid=KSLYE

  

  If you're still having problems, you can contact our customer Care https://helpx.adobe.com/contact.html

  http://www.Adobe.com/products/request-consultation/marketing-cloud.html

  Let us know if it works for you!

• I have a disc for photoshop elements 13 and 13 items first.  My laptop doesn't have a hard drive, so I downloaded first elements of your site using my serial number but I can't the same thing with photoshop elements.

  I have a disc or photoshop elements 13 first elements and 13.  My computer does not have a hard drive, so I downloaded first elements 13 from the website using my serial number.  For some reason any it won't let me download photoshop elements 13, however.  Help!

  Try another link

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I bought the first elements but I accidentally downloaded it for windows, but I need the mac version. What can I do?

  I bought the first elements but I accidentally downloaded it for windows, but I need the mac version. What can I do?

  For cancellation, please contact support

  Contact the customer service

  * Please sign with your Adobe ID *.