More question of the duration of the video/Audio output

Similar Questions

• Premiere Pro CC2015. Clips are transferred to the timeline without the video, audio only.

  Clips are transferred to the timeline without the video, audio only. Add video and audio together are only possible if you first close all sequences and throw the clip on the timeline vacuum . The CC14 wasn't like that. What is the problem and how to fix it?

  Is your Source patch and targeting of the track set correctly?

  

  MtD

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• A few questions about the video control integrated

  I'm preparing a booklet with lots of embedded videos. I have found that Acrobat does very well integrated and reliable video. The videos are large physical size, so they are activated from a small thumbnail and run in a window. The documents that I've done in the past have had only one item on a page and I put the music to turn off when the current page is not visible. Some videos are more than a minute if the player is moving another page while the video is running the clip window disappears.

  The brochure requires several video clips per page, so I need to make it easy for the user to close a window clip with what they have done. Any settings window that I use to clip the Windows Close button (upper-right) is very small, and I fear readers don't notice or have trouble using. The options 'Disable when' in the video edit dialog box are very limited, ideally I want a turn off when the user clicks anywhere outside the clip window, because it is not possible, I'm looking for an alternative. I have considered the following, but it seems that none of them are possible or practical:

  Dedicated 'Close video' button there appears to be no command available in the buttons of the user to do.

  Put all the clips on their own dedicated page and when the user clicks on the "clip" icon, it navigates to the clip video page which as a «back "button that navigates back.» It would only work reliably if the user is obliged to use the documents page navigation and prevented from using the acrobat page navigation. Even if you disable the display of the acrobat navigation buttons, it still meets the arrows on the keyboard.

  Any suggestions?

  Also when I embed the clip I draw a small rectangle and use 'recover media poster' sometimes, it puts a small "play"icon on the poster and, sometimes, it is not, it is not clear to me how to control this.»

  Thank you very much

  Murray

  Please Watch my tutorial on the AUC, which covers this idea of the 'thumbnail' using a decorative script button, so click on it opens the video and clicking it rejects the new. Scan at 7:30 if you are in a hurry.

  The icon of a poster frame is inserted by Acrobat when the image of the poster is created by the media, but if you add your own image of the poster, is not. In a few rare cases, it may not added, but we cannot reproduce this effect in tests.

• 300-1120 touchscreen y at - it a way known to produce the video / audio

  I use the 300-1120 as a security monitor for via Webcam XP5 digital security system.  The system works very well.  However, a defect of the touchscreen is lack of output of the video screen via HDMI or SVGA.  Did someone come up with a reasonable work around the issue?

  Yes, the workaround is to buy and to use an adapter USB-to-video, like the EVGA UV + UV39 (HDMI/DVI/VGA) or UV19 (DVI/VGA). There are many other brands on the market, but the EVGA cards seem to work the best.

• Windows media player: burning problems - value to burn the video audio switches as burning starts

  set to burn audio and just before burning starts, it goes to the video.   dv7 - 7270 for laptop of envy.

  Hi Wales23,

  I read your post about not able to burn videos on your HP ENVY dv7 - 7270 ca Notebook and Windows media player from switching to the video. What type of CD that you use? Are the things you're trying to burn copyright protected. You can try using the Cyberlink software provided with your laptop.

  Please let me know.

  Thank you.

• First freeze after having attempted to drop the video / audio sequence

  Hey guys, I meet a really strange for some time now - problem its not appearing not not for everyclip or everyaudio but less throughout the same audio / video files so its not a specifiic codec-related I guess - well now it crashes due to a PNG sequence (1920/1080), yesterday because of a WAV so that worked for another file wav so its a little strange.

  What happens:

  I have an open sequence - want to drag / drop additional audio or video content in it, but first change the cursor to an "icon hand grasping with a sign prohibited by his side -" then, he wants to tell me that his does not work why never-

  But the icon does not disappear and I'm not able to click on anything instead of keyboard shortcuts to save my file - so I have to leave the application via Task - Manager

  My solution:

  When I come back I drag and drop the same clip on the "new sign of the sequence to create" which work - and then paste in the sequence where I want.

  Can someone help me? Its really annoying

  Best wishes

  Joey

  If you have I/O points in the sequence, try to remove them.

• I want to find the digital audio output on my Pavilion vd6853ea notebook

  I spent far too long trying to find where this output.

  I have a very good stereo and at the moment am through a USB cable to connect to my DAC.

  It seems that there is an output digital realtec somewhere on the laptop as it appears not when I go to the playback devices and it tests ok visually.

  The 3.5 jack plug is just analog and hybrid not a spdif.

  Where is he?

  Please help as I am getting really fed up now!

  Hello

  macapaca666 wrote:

  I thank very you much for the quick response.

  I thought that might be the case.

  Can I ask you a few more questions please?

  If I want to get one don't output digital audio not using a HDMI (my DAC has not this entry), I can get a good result with something like a Musical Fidelity V USB converter S/Pdif link or a digital audio interface M2Tech Hiface? Sorry, I can't make a recommendation on one of these products as I am not familiar with them.

  Is it possible to change the soundcard with optical or coaxial output? The sound of your laptop is an integrated solution. It's a (built-in) welded chip on the system board. It cannot be updated.

  Thanks again for the kind help!

  John

  Best regards
  ERICO

• How to dedicate more RAM to the video?

  Hello

  I have a HP Envy M6, m6-1225dx and I was wondering if/how I could devote more of my RAM for my video card.

  Thank you!

  Packels

  PS

  I am running Win8.1 and I have a 64-bit OS

  Hello

  Yes, he'll be upward and the use of AVAILABLE RAM. For example: it has spare 800 MB of RAM and video may require up to 1600 MB. He could not give 1600 MB, it can only give 800 MB max.

  Kind regards.

• A few Questions about the videos on my Sansa Fuze

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  Rocket-4-Life says:

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  OK two records don't matter to you. SMC (or any other program) place the files in there, so you don't need to worry. VOB files are not compatible with SMC, so when you rip the DVD, you must use a program like Any-Video-Converter to create an AVI file or a mpge (my recommendations). Rhapsody will also add videos to the "rocket" as well.

• isn't 90% more questions from the actual training?

  Several years ago I had an instructor (Chinese leader) who was in charge of the certification test,

  and she said that most of the test questions is from dishes of course.

  It allows to actually take the course.

  Many Oracle certification tests (not all) have one or more Oracle University courses that match very closely the subjects that will be tested.  In these cases, the course of the ORGANIZATIONAL unit is a great way to prepare for the exam.  There is certainly no fixed percentage (90% or other) of the exam questions which can respond by using the material presented in the course.

  For tests where these exam-course correlations exist, I think that there is at least some degree of direct liaison between the two.  OR developing tutorials and reviews - people doing this development perhaps in some cases.  Even if developers review certainly not access o material of course and probably vice versa.

• Question about the video capabilities of MacBook Pro

  I have a 2011 13 "MacBook Air. I use on vacation to see movies in iTunes and sometimes stream of baseball games on the browser. To do this, I use the Thunderbolt port with an HDMI adapter. The screen reflects what I send to the TV via HDMI.

  I plan to move to a MacBook Pro. So here's my question.

  With a MacBook Pro 2011 or later, can I watch a movie from iTunes on the TV (via the Thunderbolt port) at the same time web browsing on the computer screen? This isn't something I can do on the Air.

  Thank you.

  You should be able to do with your MacBook Air. Have you opened the preferences system-> poster and disabled the option of mirroring?

• Synchronization of a song to the question of the video (installation of game)

  Hi all, before I ask for help, I hear deep.

  I use hearing aids to help me hear sounds (noise background, so not 100%, especially) but I can listen to kind of songs with lyrics. As when you normal people listen to music, you feel good. I feel it too.

  AAE or PP, I can see the Audio waveforms and I can tell where the beats. I can create keyframes based on some time and create effects based on these key frames.

  These things kind of helps me, but... since I save gameplay of slow (it usually takes 2 to 5 seconds for a player to die) in this game.

  So I cut the clips on my gameplay, but each clip is long enough. And as far as I know, most of the songs I like a lot of beats... Literally.

  I don't know what is the ideal approach to do this. I would like to create a good editing so that the public love him. So, here's a nice challenge for me...

  You can speed up your clips using the time remapping effect.  If you have not used before, you you read up on it a little before it makes sense.  It is in aid of the AE.

  I wouldn't be surprised to learn that the first can do it too, but I'm a guy FCP/Avid; not well versed in the first.

  And since many video tutorials for After Effects are not of great use to you - people are talking a lot in them - I recommend googling Chris and Trish Meyer, or go to their website, the Coalition video Pro.  They publish an excellent series of books on learning After Effects.  You might find them useful.

• More questions about the Excel export

  Zahid gave me the below code that worked perfectly, the only problem now is that one of the fields in my table have something like 'House, white,'
  in other words there is a comma sometimes 2 or 3 decimal points in a column so that in the output file created in the code below, Excel it's a new column and
  in fact 'white house' 2 columns
  can I fix this
  Thank you
  Doug
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Hi Doug,.
  
  
  
  You can write your own procedure to export to excel. As follows, you can do so and also to solve the problem you are experiencing.
  
  
  
  1. create a report on the emp table, showing sal, ename and empno column.
  
  
  
  2. create a blank page.
  
  
  
  3. create a process before heading in this white page with the following code:
  
  
  
  declare
  
  I have NUMBER: = 0;
  
  Start
  
  -Set the MIME type
  
  owa_util.mime_header ("application/octet", FALSE);
  
  -Place the name of the file
  
  HTP.p ('Content-Disposition: attachment; filename = "emp.csv ';'");
  
  -Close the HTTP header
  
  owa_util.http_header_close;
  
  -To loop through all the rows in the EMP
  
  for x in (select ename, empno, sal
  
  WCP
  
  where deptno =: P73_DEPTNO)
  
  loop
  
  i: = i + 1;
  
  -Print a portion of a line,
  
  -separated by commas and ended with a CR
  
  If I = 1 then
  
  HTP. PRN ('Name' |) ',' || 'Empno ' | «, » || "Salary". Chr (13));
  
  end if;
  
  HTP. PRN (x.ename |) ',' || x.EmpNo | ',' ||
  
  '='||'"'|| x.Sal |' » ' || Chr (13));
  
  end loop;
  
  -Send an error code so that the
  
  -rest of the HTML does not
  
  htmldb_application.g_unrecoverable_error: = true;
  
  end;
  
  
  
  4. create a button in the report to branch to the empty page created above.
  
  
  
  And that's all.
  
  Note that I used '=' and 'in the procedure above to treat the number of shaped question.
  
  
  
  It will be useful.
  
  
  
  Thank you
  
  Zahid

  If you use the export of standard report, make sure that you specify the closed by as a double quotation mark.

  To use the code you just change the line that writes the data as

  HTP. PRN (' "' |") x.Ename |' »,'|| x.EmpNo | «, » ||

  In case it is not unclear, I just added the double quotation marks on either side of the ename. That for any data field that may contain commas.

• .. more questions about the value of the slider extraction

  It is a matter of Alain S. .. .in your sugested code: The resistance value is equal to the value Y of the trace of the Z11re and the capacitor, or the value of the inductance are derived from the track of Z11im.  Inside the Structure of the event, the structure space 0 and 1 are connected to the same value of slider Y?  How can you tell the business structure to use (in this case 0) the track of Z11re and in case 1 Y the Y in the trail of Z11im? The calculated values seem fair? .. .it must be defined with CursIdx within the Structure of the event, but how and where can I see the installation of this control? Have a while loop for the Structure of the event force the program to loop always at this place, it generates a lot of CPU (I have add an indicator to see the number of iterations), it seems to me that the structure of the event should do this whitout was looping work? Kind regards

  After reading on CursIdx, I understand the concept.

  case closed.