First HP: Complete the square

Similar Questions

• Re: First steps after the purchase of a laptop?

  Hello
  We bought a Satellite A500-GL for my 17yo son.

  I could ask for advice on what needs to be done on the laptop it whips away before he spends hours playing with it!

  I know there will be some user guides etc there to do this, but there not the patience to sit and wait while we wait until he does, and as it is sealed, we can't not look beforehand.

  I know that Anti virus/Internet security protection will be a. Can you offer me anything else e.g. recovery disks or the laptop are provided?

  Thank you very much

  What you need to do is follow:
  # Connect your laptop on AC power and after 10 minutes departure for laptop for the first time
  # Complete the installation of the OS recovery
  # When the operating system is loaded create restore DVD. For this I recommend you use DVD-R media
  # When the recovery disk is created your son must click around a bit to see what kind of things is installed it is
  # Connect the laptop to the internet and install the latest updates. Be careful with this. do not install the optional updates.
  # your son can then remove some system software if it doesn't like it.

  Please note: on the second partition is saved in the folder called HDDRecovery recovery image. These data are very important and you can do HARD installation operating system drive recovery (without using the recovery DVDs). How it can be done is described in this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If this file will be removed or deleted, you won't be able to create recovery DVDs or use installation of HARD drive recovery.

  If you have any other questions please let us know.

• I try to download my first pro, but the installation is terminated at 84%, indicating "installation is complete although some optional components failed to download properly (6). Help, please!

  I try to download my first pro, but the installation is terminated at 84%, indicating "installation is complete although some optional components failed to download properly (6). Help, please!

  I bought tonight and im debating having a refund!

  You can try to use the Adobe cleaning tool and try to download again:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• CC will not be listed first installation after that first install would not complete the installation.

  Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

  Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

• Lightroom navigation and develop panels are completely absent on the first opening of the program

  I just downloaded Lightroom 5 compared to the creative clouds on my MacBook Air laptop, and I'm stuck. When I opened the app for the first time, nor the navigation panel on the left, or on the right Development Committee appeared, and there is no trace of these existing panels. In addition, the warning "an error has occurred when attempting to change modules" appeared when I opened the program for the first time. Two problems whenever I have open Lightroom - so I'm totally unable to import photos or to start.  I search the Web for fixed and I tried many suggestions but nothing has changed any of the above problems.  Also, in the clouds creative, if I try to uninstall Lightroom, the message "Not available uninstall" and there is no way to uninstall the program with the utilities.  Furthermore, I use Lightroom systematically on another computer, so I'm pretty familiar with the program.  Help!

  Dear Jim

  Problem solved by following these instructions (from another forum):

  Solution 5: Set the correct permissions on the Lightroom Application Support folder

  The Lightroom inside the Application Support folder may have the wrong permissions prevent Lightroom to write to what may cause this error.

  Navigate to the following folder: /Users/ [user name] / Library/Application Support/Adobe/Lightroom

  Highlight the Lightroom folder and chose file > information

  Under sharing & authorization, check that your privileges of reading & writing. Otherwise, click on the padlock icon at the bottom right, enter your password when prompted, then click the only entrance to reading and select read & write.

  Thanks for trying to help!

  Susan

• What add - it (s) FF will complete the name, address, telephone, etc. When you fill out an order form on a site?

  With my new Win7 desktop, options for the completion of the data after I type the first letter or number, is not, as was the case with my old unit.
  Such as, if I typed 'e' East Moline came, or if I typed a "6" my zip code came.
  I don't remember, but I guess that this has been accomplished by an add-on for Firefox.
  Which one, or ones, will accomplish this?
  If it wasn't an add-on, how to activate this option?

  Get a form by completing the module

• Tried to uninstall firefox but says must close first, click on the desktop icon and firefox does not open

  I was planning to install the new version, but it keeps telling me to close firefox first, click on the icon and nothing happens, is gone to internet explore and found Mozilla support but nothing listed there help
  Please help me with this problem, do not use Explorer

  Men of Firefox > File > Exit

  Open the Task Manager > processes and check firefox running in the background?

  ________________________________________________________________________________

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Cannot complete the Installation of Snow Leopard on MBP 2009

  Hello! just got a 2009 MBP, it ran very nice El Capitan, but I decided to downgrade to ensure best performance on older operating system.

  So I got this Snow Leopard DVD, everything was OK, then on the first boot, when you select the country/keyboard/account etc...

  at some point in these steps, MBP just freezes, pointer starts rolling in all the beautiful colors and nothing else. Also, a few minutes later MBP shuts.

  Should I mention that first I have deleted all the disk HARD, maybe isn't properly? On the first attempt to Snow Leopard could not begin installation, and then to recover, I think I did it right.

  Now every time MBP try to complete the installation of SL, but freezes.

  I can't go into Recovery Mode or Safe Mode, cmd + r / alt does not work no matter how faster I press on them.

  Any help? Please, I beg you!

  Cheers.

  There is no recovery mode installed with 10.6, so "can not enter Recovery" isn't a mystery.

  Boot from the DVD and check your hard disk with disk utility. If you wait one quarter minute after having responded to the 'what language?' question, the menu bar is displayed, all you can choose disk utility menu.

• Windows cannot complete the installation - Toshiba NB250

  Hello

  My netbook has been sitting not used and the road for about 6 months.
  When I tried to use it the other week he was very slow and kept crashing so I tried to erase the unwanted programs from him but I couldn't.

  The netbook kept crashing whenever I tried to uninstall programs and try to do something about this, even open internet explore took about 5 minutes, it's faster on 15, laptop of my father who has a huge 256 MB of ram in it! I gave up and decided to restore it to the factory settings. I found Toshiba HDD recovery option and follow the instructions.

  The way in which the process a window pops up saying "Windows could not complete the installation. To install windows on this computer, restart the installation '. I clicked on OK, all in all I rebooted the machine about 6 times with the same message.

  I tried to boot into safe mode and in the 5th test (previous 4 raised the same message) I "cannot start Windows.
  A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click "Next".
  3. click on "repair your computer".
  File: \windows\system32\config\system
  Status: 0xc00000e9
  Info: Windows could not load because the system registry file is missing or corrupt.

  Now, I bought a new USB drive and booted from that. The first time it kept freezing during configure them then wouldn't start at all. The second date he kept freezing and then took more than an hour to load windows. I left it for a few days, came back to him and all I could get is a black screen with a white cursor. I now need the netbook for Monday so try again.

  For tests 3 and 4 I run through gentle but end upwards with ' Window3s could not complete the configuration of the system. An attempt to take over the configuration, restart the computer. »
  Been several times since both trying without success. Currently looking for a hammer...
  There are now two different options for operating system on it, I tried both, but get the same answer at the same time.

  Someone has an idea, what happens?
  My warranty is I think (is there a way to check?
  I don't remember when I bought it! It was last year or the year before) so I don't think I can get any help from anywhere.

  Hello

  It is not easy to say what the problem is here. If the recovery image and HARD drive are OK, you should be able to install recovery image and use your neetbook with the factory settings.
  When you've got this netbook as a new machine, I assume you didn't create recovery USB support. Can you confirm this?
  > Now, I bought a new USB drive and booted from that.
  And what is recorded on this USB key?

  I can't say with certainty what the problem, but now you should test original recovery image installation and see what happens. In case the same thing happen over and over again, the problem may be related to the HARD drive.

• MacBook Pro not completing the update after reboot

  Hello!

  I have need help and need some advice. It has been more than 3 months now that this has not been resolved. My Macbook Pro will not perform updates on the App Store after the reboot. I restarted to complete the update, but the message keeps popping up that I need to do the same thing. The software update that needs to be updated is Mac EFI Security Update 2015-001 1.0. I have a Macbook Pro 2012 OS X Lion Mountain 10.8.5. Help, please!

  the message keeps popping up that I need to do the same thing.

  Whence this message pop up?

  Update App Store problems See Linc Davis response.

  Go to the  menu with the option/alt key is pressed and select the first item. Then, go to the software/facilities the report part and see if the update is listed as installed.

• HP probook 4520 s held the first screen of the logo

  I was installing windows when the system which took place facing upwards. When I rebooted, it crashes on the first screen of the hp logo. where written "press ESC to display the boot options. without key works ceiling light flashes several times and turn off.
  It is repeated each time. Help, please.

  When it is connected to your desktop computer, can you feel if he goes? When you say that the Bureau does not detect the hard disk, which is in the bios, or when you open my computer?  If the drive is recognized in the bios, you can buy a software like ntfs getback who will try to rebuild the fat table so you can copy items over to the hard drive of the desktop computer.  You can download a trial version that will let you know if it will work, but you will have to buy it to actually transfer the software on disk from the desktop. You can also try to download the certification test of the drive manufacturer that will fix the bad sectors and some minor problems. SpinRite will try to retrieve data for each of the areas that may be of low bits set not completely (upwards or downwards). If the Office does not see the drive in bios, the circuit board on the hard drive is bad or the disc is not rotating. If you gently hold the disc in hand and slightly turn the disc, you should feel a gyroscopic effect of the spinning drive. If you do not feel the disc spins, the motor is probably bad or racing circuit on low hard drive circuit is bad. Sometimes (perhaps 50%), you can try to replace the circuit board with the exact same model Platinum (even if you buy the same model of car, they may have different circuit boards).  The problem is that newer readers have a flash memory chip that stores the settings for each specific access accurate and speed reader. If the exact same Platinum turns the drive, but can't read well, he have to unsolder the flash chip and move it to the new circuit board. Then, the chances improve for recovery. If the new Platinum will not turn the engine, the engine is bad. You will need to send the drive to the manufacturer or to a recovery company that can remove the platters and mount them on their equipment, calibrate and read it (probably $1000 + without warranty). There are people who post how to break on the old engine and replace it with a new one, but I think it would be a mistake to try.

• I bought a used iPhone 4S and erased and the previous owner had his account iCloud out of it, but I can't yet to complete the set up because he says sim card is not supported?

  I bought a used iPhone 4s to a friend of mine, and they took their offshore and all iCloud account as they were supposed too. It still won't let me complete the set up it says that my card SIM of Fido is not supported, but the last time I saw the information of the carrier when the person that I bought the phone he said 15.5 Fido I think. Do I need to phone apple or what I call fido and to somehow cope? I myself remember having to change devices when using a fido handset represent the last I checked, and I'd love to have this figured out without having to pay more money. Help lol

  The error you see on the SIM not supported is indicative of the device being locked to another carrier SIM card that you provide to. I suggest you check that with your friend and see if this device has been locked to another carrier. Could be called Apple, but all they could do was tell you what carrier of the device is locked to Apple do not unlock phones. Once find you the carrier, you need to contact and see if provide unlocking services, and if they do, see if you qualify to unlock. Once again, your best first call is to the friend you bought it from.

• G6-1103sa Pavilion, completed the recovery after problems, but does not restart after recovery

  Hello

  I have a Pavilion g6-1103sa, with Windows 7, after a few problems of software I could just get to open in safe mode, so saving docs and images on a remote hard drive successfully, tried to complete a restoration of the system to the factory settings by pressing the ESC key on the switch and selecting the option to do so.

  When the restoration is complete, the there is a message saying that the restoration was a success and the laptop restarts, however all that happensis a message appears saying: your computer is preparing for first use, but then nothing happens

  What can I do now?

  Hello dgreen1004,

  Like the previous step to reinstall the OS from the recovery partition has failed, the only other option is to try a recovery media. Per your request, I am including information on how to get a recovery media. Please open the link following "Research drives HP recovery or a USB HP recovery disc?".

  Kind regards.

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/