First HP: Hms to decimals then back, decimal to HMS

Similar Questions

• I have Vista, and in my records, I would like to see my records of first ranking in alphabetical order then the files in alphabetical order. I can't find how to do this.

  Folders in alphabetical order
  Files in alphabetical order

  When you are in an individual file, you can set to sort by alphabetical order first with folders and files then by simply clicking on the name header (you may need to click twice because the first time it can sort in reverse alphabetical order).  Then, it will stay like that (although if you add new files or folders, they can go down the bottom of the list, regardless of the name).

  Maybe if you reset your files it will help (although I don't know - that's really not why).  Go to start / Control Panel / folder Options / View and click Reset Folders.  This will reset all records to their default state and since alphabetical is a defect it can work for this.  I can't test it myself because all my folders and files are already in alphabetical order.

  Good luck and I hope this works - but after back and let us know anyway. Lorien - a - MCSE/MCSA/network + / A +.

• Intel wifi link 1000 bgn on Hp laptop connection only to 65 Mbps or Mbps even 58, then 130 for 1 second then back to slow speed.

  I recently bought a computer hp laptop and enjoy wireless n to my house.  I have an another hp laptop which connects to 130 Mbps and never changes.  This laptop however changes constantly and never stays in 130.  It is generally about 58 or 65 and then change during 1 second to 117 or 130 then back to slow speed.  I noticed on the laptop properly configured, it says:
  IPv4 Internet connectivity
  local IPv6 connectivity
  active state media
  130 Mbps speed

  On slow computer, he States:

  IPv4 Internet connectivity
  IPv6 connectivity no internet no access
  active state media
  65 Mbps speed

  I don't know if this means anything, but I guess for this.  Is there something misconfigured on laptop #2 or what?  I can't understand this.  I would like to be sure that this adapter in this laptop is also able to maintain 130 Mbit/s, but there are no at that speed.  Any help would be greatly appreciated.
  Thank you

  I had the same problem with the same Intel adapter WiFi 1000 BGN.  Two things fixed.  My router by default, the band of 2.4 Ghz to a maximum of 130 Mbps for backward compatibility.  Change this 300 Mbps.  Second if your router allows you to set the parameters for QoS make you that WMM is enabled.  Thirdly, map properties network by default to the following on the old card NETWORK interface:

  Channel 802.11n for 2.4 band width = 20 Mhz only

  802.11n mode = disabled

  Ad Hoc QoS = WMM disabled

  The default values have the capacity "N" disabled, because when the card shipped first Wireless N routers were rare, and it has improved the flow of 'G '.  Change them to 'Auto', 'Enabled' and 'active WMM.  The last of them allows the priority to multimedia for the peer-to-peer network data local transfers (i.e. - video streaming, music between two computers in the same House).  Hope that helps.

  Shane

• Now I have firefox at the top of my screen, then file, edit etc, then Home tab and then back, to the front, my bookmarks and then a small space underneath for my pages... If he gat all smallet that resemble my iPhone!

  Now, I have firefox at the top of my screen, then file, edit etc, then welcome tab, then back, forward, then my bookmarks, and then a small space underneath for my pages... If you find any smalliet that it will look like my iPhone! ... I can get red of some or move them?

  Hello

  Please see customization. You can hide/show elements via View (Alt + V) > toolbars.

• How I count from 10 to 0 then back to 10?

  I am a motor with LabVIEW and I would like to advance a position 14 to 0 in increments of 1 then back up to 14 in 1 increments, and stop there. Any suggestions on how I could set up a loop to do. The routine will be part of a state machine base and whenever I enter this State, that I would like to make the increment.

  Thank you.

  14 or 10?  The subject says 10, but the message says: 14,.

  Just keep track of if you count up or down in a shift register.  Put 1 in the shift register, if you're out,-1 if you are backwards.  Just add this value to the County that you store in an another shift register.  When you hit one end or the other, take the negative of it and put it back in the register shift.

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• I tried to install Adobe Flash Player, but he told me to close Explorer first, so I did. Then I tried to test it by playing a video, but it doesn't 'take' what I do now

  original title: Still No video.

  I tried to install Adobe Flash Player, but he told me to close Explorer first, so I did. Then I tried to test it by playing a video, but it doesn't 'take' what do I do now?

  When you go here, what does say under the Version information?

• When it start printing; It intercepts the first part of the paper then stop

  Hello
  I have HP LaserJet 1100
  When it start printing; It intercepts the first part of the paper then stop; so it does not print and the part of the document come in but not out
  So what is the name of the part should be replaced?
  Let me know soon
  Concerning

  Hello

  Thanks for the post.  With it, we can have several questions the cause.  Type/paper weight, not enough paper in the tray, rollers which don't sting power or the remains of a previous paper jam.  I've included a pasted below document that can help with this and help refine the root cause.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=25470&prodTypeId=18972&prodSeriesId=25470&ObjectID=bpl05811

• How to stop the Aero theme to the base, then back again?

  My computer keeps switching of base, then back to Aero. while I do nothing. The PC can be sitting idle, and she will be back.

  I ran the resolution of problems, and he said that any problems could be found. My PC has 16 GB of memory, 1.5 TB harddrive, 2 SLI GeForce GTX 650Ti Boost 2 GB processor AMD FX-9590. Its Windows experience index is 7.8, so I don't see why he continues to change base. its very annoying for me.

  How to make this stop to do this?

  Y at - it a setting or something I can change to stop the switch back?

  This also happens on my other computer. Its a 1.5 TB hard drive, 8 GB of memory, GeForce GTX 260 OC 1. Its Windows experience index is 6.8 because of the old graphics card, but its always up to date and will be supported by NVIDIA for 5 more years.

  Hi Bobby,.

  Windows does not know which is better at some times, it is best to take control and choose your own settings.

  Follow these steps:

  a. click the Start button and click on Panel.
  b. click system, click on Advanced system settings

  c. in the System Properties window, select the Advanced tab.

  d. click on the settings button under Performance.

  e. now change the option to "Let Windows do what's best for my computer" to "adjust to improve the appearance.

  f. click on apply and OK.

  In addition, see the article:

  Why are some Visual elements will automatically turn off?
  http://Windows.Microsoft.com/en-CA/Windows/why-Visual-elements-automatically-turned-off#1TC=Windows-7

  I hope this helps. If you have any other questions, we will be happy to help you.

• Chapter of digitized book converted into word and then back to pdf - PDF final chops pages

  Hello

  I downloaded the trial version of Acrobat Pro DC because I was told that instead of having to take notes in the manual of chapters of books scanned in my referencing system, I could convert it to a readable/editable word document, then back to pdf format (which is easier to use in the likes of Mendeley, devoir2 etc.).

  I managed to convert the original scan - which has two pages of the book by page, format the format landscape and landscape - in Word and all the text was maintained. This was very good. The problem occurred when I tried to convert this word in a PDF document. At this point, only the left side of each page (if the left page of the open book) was complete and the right side has been reduced by half. I tried to turn all of the text in the word so document flowing sideways through a portrait page layout (which is how the initial analysis was and I just turn it in my referral program). It's the same thing when I tried to convert to pdf format. The right side of each page was still cut off, even if the version of Word was all there.

  Anyone has a suggestion how to get around this problem?

  Thank you.

  You can use "Recognize text" under Tools > improve scans

• I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Pouvez anyo

  I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Can anyone help?  I tried all the troubleshooting steps that I could find in the forums and online without success.

  

  I managed to fix it.  I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked.  He fixed the corrupted registry file and allowed me to install the player.  I had tried it once before, but it has not been successful.  This time, it worked.

• How can I animate a 2d form a curve turning forward then back around on itself in after effects CC.

  Hello

  I'm trying to animate this arrow image attached with After Effects to move forward in a form circular then back on itself for a chart of type pre loader.

  I would like the curved arrow as if he was moving forward in the curved cloud then save under it's original state.

  Sorry, I'm not sure how to explain it better. I wish all of your comments, help and thoughts.

  Thank you!

  

  Effects--> Perspective--> CC cylinder.

  Mylenium

• Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again

  Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again? Any ideas for help?

  Hi rsev,.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  To prevent this from happening in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Uncheck the apply auto tone adjustments.

  Reference: thumbnails appear black in Lightroom CC 2015.2/6.2

  It will be useful.

  Kind regards

  ~ Mohit

• Downloaded first Pro CC opens briefly, then crashes with "Adobe first Pro CC stopped worki.

  Downloaded first Pro CC opens briefly, then crashes with the message "Adobe first Pro CC has stopped working".

  Make sure all your drivers are up-to-date.

• 2015 CC - "dummy undo undo" - I can't cancel after the first, then back to AE

  Every since I have updated to 2015 CC, I can't cancel my After Effects composition changes when I move to first, then returns to After Effects.

  When I switch back to After Effects, the "Undo" and "Redo" menus give me only the options "cancel cancel dummy" and "cancel dummy, again" that appear to have an effect, and I'm stuck with the last change I made of my composition, if I want to keep it or not.

  Is there a way to fix this?

  
  Thank you!

  We are aware of the problem, and we are working on a fix.  This problem occurs when the task of switching between apps (in the foreground, go to the PR, go back to EI).  The menu Edit (Undo/Redo/history) in AE fills with "Undo model value.  There is currently no work around.  But you can clear/reset the EI Edit menu without having to restart the application; Edit > purge > all memory.