Utility Toshiba HDD Protection cannot be installed on my C50-A513 Satellite

Similar Questions

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Satellite U300-11V: where to find Toshiba HDD Protection for Win7?

  My Toshiba U300-11V has been factory-installed with Windows Vista.
  When I recently upgraded to Windows 7, I had to uninstall the Toshiba HDD Protection program as it was incompatible.

  Y at - it a compatible version of Windows 7 from this program somewhere?
  If so, how can I download it to my computer?

  Hello

  Have you tried the HDD Protection Utility released for new laptops from Toshiba as Satellite U500?

  Generally, it should be possible to install the app on your U300

  Check it!

• Re: Unable to install HDD Protection for Satellite L750-A218

  Hello

  When I try to install the Toshiba HDD Protection software it says that its not available for the model.
  I got the exe of the drivers Web page for my exact model of latoptop.

  It is a follow-up of:

  http://forums.Toshiba.com/T5/drivers-and-utilities/HDD-protection-not-available-for-this-model/m-p/298900/

  Thank you.

  Hello

  You are looking for HDD protection Utility for Win 7 64 bit system.
  Right?

  The utility of the HARD disk protection was preinstalled on Win 7 32 bit system?

  I found the 64 bit HDD protection utility for series Satellite L755 version.
  There are two different versions: v 2.2.1.12 and v2.2.0.12

  Try to install both, but before you do this, you must install the VAP (value added package) for 64 bit system

• Satellite M840-B500: utility of disk protection HARD and low sound

  I have a Satellite * M840-B500 * portable.

  1 Toshiba * HDD protection utility * appeared in its characteristics.
  but it was not installed when I got the laptop.
  I downloaded the HDD protection software against download of Toshiba Europe
  but during the installation of the software it says that this feature is not available in this model.

  2. the sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

  I bought the laptop from the UNITED Arab Emirates and now I am in India.
  Thanks in advance

  > 1. Utility of Toshiba HDD protection was included in its features, but it was not installed when I got the laptop.

  Sorry mate, but what do you mean by appeared in its characteristics?
  If the HARD drive protection utility is not installed by default, the laptop does not seem to be equipped with a sensor HARD drive protection.

  > 2. The sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

  There are not a lot to do to ensure that all volume controllers have the highest value.
  You can do this in Control Panel-> sound-> the Read tab
  You will find various reading devices. Right-click on the device (speakers) and choose Properties.
  Here you can set the volume level

  Of course, you can click on the small speaker icon in the toolbar display volume control

• Satellite U400-10 was supports the HDD Protection probe

  All of the documentation I've read on Satellite U400-10 model has (PSU40E-00K006DU) indicates that it has a HARD drive protection sensor installed.

  I can't find this sensor listed anywhere in the Device Manager, and when I install the Toshiba HDD Protection utility it tells me that there is no sensor.

  Someone has this model with the sensor HARD drive Protection?
  If so, how say you?

  Kind regards

  Hello

  As far as I know the Toshiba HDD Protection Utility V2.0.2.3 (for Vista) was pre-installed on the U400 series, so in my opinion, the sensor is available.

• Problem with HDD Protection - Satellite U300 - 14 p

  I just bought my Satellite U300 - 14 p and installed windows XP SP3 0.5508 (deletion of Vista that comes with it), with a custom windows XP, boot disk [nLite 1.4.1 | http://www.nliteos.com/index.html] (to include the SATA driver and set up my preferences, such as themes, etc.).

  I followed the instructions (installation order) that are on the Drivers Toshiba Download Page and everything goes well until the moment of the installation "TOSHIBA HDD Protection"(v2.0.1.7)", where I get the error message:

  "TOSHIBA HDD Protection only is not supported on this model".

  Because I downloaded the driver for Windows XP and my computer model (Satellite U300 - 14 p) I do not understand what the problem is.
  Can anyone help?

  Hi mate,

  you already updated your BIOS version? It could be that the BIOS does not correctly both support it s worthy to try.

  Otherwise I wouldn know why this error message is displayed.

  Welcome them

• Re: Satellite Pro U200 - cannot install HDD protection Utility?

  Hello

  Know somwonw why I can't install:

  18/08/08
  HDD Protection Utility
  Toshiba Windows Vista 32bits 2.0.0.7 World Wide

  on my PLUA1E Satellite Pro U200-02802QS4 with Vista Business 32-bit?

  Hello

  And why you can install t HDD Protection Utility? You get an error message?

  Please explain your problem exactly because normally Satellite Pro U200 support this utility.

• Windows cannot be installed after replacement Toshiba HDD

  I installed Windows 7 (and Windows XP) on my laptop A42F, another manufacturer, using a DVD without problem and was used for about 18 months.

  Last week TOSHIBA MQ01ABD050 hard drive has failed and it turns out the disc has been damaged.

  I managed to save most of my data and the hard drive has been replaced by a NEW and similar (TOSHIBA MQ01ABD050) hard disk.

  Using the same DVD as the previous time I can't install windows more. I also tried other CD and DVD that worked before on other PCs and this laptop.

  I tried to install with or without created partitions.

  When booting from a CD / DVD to install Windows, it starts to load files quickly. About 80 percent, it slows down a lot and finally a page with a message (the note below is not the EXACT text):
  Windows has encountered a problem during communication with a device
  .........
  ... contact the hardware manufacturer
  Status: 0xc00000e9
  Information: unexpected IO error

  It is possible to boot from the CD and run MiniXp (or linux) and write about your new TOSHIBA MQ01ABD050 hard drive.

  My questions:
  (a) any suggestion plausible why I can't install?
  (b) has anyone seen this before?
  (c) what can I do to solve the problem?

  Any help will be appreciated

  Hi Jack

  I think it's a bad place to ask for help, even if you have replaced the HARD precedent with the Toshiba HDD drive.
  For me, it is not a HARD drive problem.

  In my view if s notebook BIOS recognizes the HARD drive correctly, then you should be able to install the system on this new HARD drive. But according to your material, some additional drivers (perhaps the drivers SATA) would be necessary, but it should be clarified with the support of laptop manufacturer.

  I think you should get in touch with the manufacturer for laptop support in order to get more details on possible solutions

• Re: HDD Protection utility has stopped working?

  I came just to look at the Toshiba PC Health Monitor yesterday and I saw that my HARD drive protection did not work. I clicked on the drive and all my functions are greyed out and I couldn't allow him once again.

  So I did some research on Google and saw that I'm not the only one having this problem I did what other people did and tried to install the HARD disk Protection software... once again. Well about half way through the installation process, I get the following error:

  * 2753.The error file 'startmenu.exe' is not marked for installation

  and you can click the 'okay' box that automatically closes the program. I don't know what to do now.

  I have a portable Satellite P755-S5269 I bought a week ago.

  Hello

  I studied a bit and it seems that the 2753 error file is not marked for installation appear under different applications so it s not related to the software Toshiba other apps but is generated from the Windows Service install detect old installation of software that cannot be removed.

  I recommend you download and install the Windows Installer Cleanup utility and remove all detected HDD Protection Utility versions.
  In addition, you can also try to clean the registry using the CCleaner.
  Then restart the laptop, download and run the HDD Protection Utility setup once more.

• Portege M800-107: Power Management & HDD Protection Utility questions!

  Hi all

  I own a Toshiba Portege M800-107, I recently installed windows 7 (ultimate edition), which has improved the capabilities of my laptop. The only problems I see are:

  (1) the utility power management, when I install the necessary drivers on the official page of Toshiba, the problem is that the package of added value is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  (2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  Out these problems the laptop works perfectly and quickly.

  If someone could help me with my problems, I would be very much appreciated.

  > 1) utility of the power management, where I install the necessary drivers on the official page of Toshiba, the problem is that the added value package is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  There is no special tool of Power Saver for Win 7. Value added package provides a few additional options that you can find in Win 7/Vista power management.

  Check this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  (> 2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  The HDD Protection Utility using the acceleration sensor built into the computer.
  The point is that there are different M800 market and possibly your M800 does not support acceleration sensor. This could be the reason why you can not install this tool.

• Toshiba HDD utility to write zeros to the drive

  I have a big problem in my Toshiba HDD and I need a Toshiba HDD utility but is not. I'm sure a zero fill can solve my problem.

  Other HARD drive seagate or wester digital provides us with DOS software to solve problems, but I can find a similar software for Toshiba HDD.

  Can anyone hel me?

  Hello

  What HARD disk utility do you mean exactly?
  On the Toshiba European pilot page you can find the HDD Protection Utility but this utility would work on laptops with a HARD drive shock sensor. So if your mobile phone does not support such sensor, this utility will not working and would not protect the HARD disk

• Libretto U100 - HDD protection warning appears during playback of some CD

  Hello

  The sensor HARD drive protection warning when I tried to play some CD. So far, this has happened with 2 CD, one which I have tried to install the drivers (which I "finished work" ultimately and downloaded the drivers from the Web site instead) and the other I tried to install an application (which finally installed but I had to "end task" and eject the cd). After the "end task", I checked if had installed it the application and it was completely installed, but the CD was 'stuck' in the installation dialog screen somehow, and "Finish" screen does not appear.

  I don't think it's the player that I played a cd of music without problem. I think that the drivers are ok, because the buttons on the unit are functioning as intended. The cds are without dust and scratches.

  If anyone has experienced this problem and you know a resolution?

  I look forward to your reply.

  Kind regards.

  Hello

  Strange

  Usually HDD Protection detects the vibrations, shocks and these signs in the computer and head of HARD drive (HDD) moves automatically to the safe position to reduce the risk of damage that might be caused to the drive in head-to-disk contact.
  But I put t. see connections between the Protection of the HARD disk and playback of the CD.

  However, the HDD Protection Utility controls the HARD disk Protection sensors.
  Maybe you should try to reinstall this tool.

  Go to the Toshiba European page, download the utility of the HARD disk Protection 1.01.08 and reinstall.

  Then you can check if the message appears again.

• Satellite A500-10F - HDD protection freezes the machine

  I did a clean install of Windows 7 Professional 64 bit on my Satelite A500-10F. It does seem however to all the drivers for it.

  There is a problem with the HARD drive protection. When she is supposed to trigger the whole machine freezes and I have to turn it off manually. Are there drivers available for this? If yes where can I find them? What else can I use until these become available? Hope there is a solution to the problem of easily available with windows 7...

  Hello

  Satellite A500-10F seems to belong to the series of PSAM3E and the Win 7 64 bit drivers are available on the page of the European driver Toshiba for this model of laptop.

  There is also a HDD Protection Utility v2.2.0.2 for Win 7 64 bit.
  I recommend to remove the old HDD Protection Utility, then clean OS using CCleaner for example and after new reboot you might reinstall the software again.

  Welcome & good luck

• Need TOSHIBA Recovery Wizard, but have simply on TOSHIBA HDD Recovery Tool

  Hello world!

  I bought Windows 7 Home Premium OEM SP - 1 preinstaled in Turkey with model Sattelit L675-10z. Corsica, is in Turkish,

  And as I am not Turkish I wanted to find a way to use it in Russian. Toshiba supports service in Turkey told me that they cannot help me with this, so I have instoled program Vistalizator with the Russian language.

  It has been activated Windows without problem and just "authenticity windows 7" were not working. But I had the opportunity to download all the files to update windows without notifications.

  After 6 months of work, my child is delited some .dll files that I understood and also he deleted all the windows recovery points to sistem windows recovery.

  And when I tried to use toshiba HARD drive recovery, I was surprised. Before I got the toshiba laptop with windows 7 (also satelit L series) and it was easy to recover, but http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm I'm shoked. When I try to push button 8 in the bios I have not any TOSHIBA Recovery Wizard... .i have just TOSHIBA HDD Recovery Tool the same situation with button 'Zero' in the BIOS.

  Toshiba Recovery tool do not give me a chance to recover windows fair he also wants to erase all my files in all drives.

  I have also done with Toshiba Recovery Media creator usb charger and you have find it also gives me opportunity just to clear all my files in all computers.

  but I also find there a file setenv.ini with the following parameters.
  [Commune]
  Packer = ImageX
  InstallCMD = \inst.cmd
  FactoryInstallCMD = \facinst.cmd
  PartitionSizeGB =-1
  MinPartitionSizeGB = 15
  DefaultGUILang = English
  NumLang = 1
  Hnum = R13026TE
  [Lang1]
  Lang = TRK
  OS = Windows Win 7
  ImageName = 11898XSP.swm
  ImageIndex = 2
  WinREIndex = 1
  FS = NTFS
  StartMedium = 1

  and 2 files with name boot.wim so I think I can install windows 7 without erasing all my records? and there is also possibility to choose the language?

  Or maybe I should ask toshiba company servise on help?

  Have no idea what to do. Do not want to pay for another license, do not want to lose all my files, and want to use lisansed BONE in my native language or in English.

  Or if that's not possible, I would like to get the Turkish version of windows.

  Thank you
  Natalya

  Hello Natalya

  First some facts for you. I hope that this will help you understand some important things.
  Computers notebooks are specific products of countries and every laptop on the Turkish market is actually for people who use Turk language. In other words, they will get operating system and keyboard for that language.

  Each book is available for some countries of preinstalled language and there is no way to activate a different language. If you live in Russia and use the Russian language you should get Windows7 on your language and install it on your laptop. All the necessary drivers tools and utilities can be downloaded from the Toshiba support page. Of course, to the clean OS install, you must pay for the license of Microsoft. The button down belongs to the original version (Turkish language).

  When you install the operating system using the recovery image of HARD drive you Turk language again and the problem is not solved for you. In my opinion you n t to use this image at all. You can't choose your Russian language and, in general, this recovery mage Turk is useless for you.

  My advice to you if you want to keep this notebook:
  -change the keyboard (Russian language) the nearest Toshiba service for help. they can order and exchange it for you
  -installation disk install Win7 using Microsoft original (Win7)
  -install all the necessary drivers, tools and utilities from Toshiba download page the link is on this forum page (support Top sites)

  Please read all this and let me know if you have any other questions.