First ignores key scale images when exporting!

Similar Questions

• Lines on images when exporting Indesign to JPEG

  I get lines on the images when you export a jpeg file to indesign (with links to illustrator who have incorporated pictures into feathers). Help, please

  The simple solution: do not use EPS. Use HAVE with PDF compatibility. No vector fonts, nest them.

  Von meinem iPhone gesendet

  Am 24.07.2014 um 10:05 wrote Kelly Deane [email protected]>:

  Lines on images when exporting Indesign to JPEG

  created by Kelly Deane in InDesign - discover complete discussion

  Hey Willi,

  Sorry I'm new to this. Here are the answers to your questions and I hope you can give some tips.

  1 OSX 10.9.2

  2 indesign CC2014 (I just started to use during the last two weeks)

  3 illustrator CS3 (files that have been given to me, have been created to CS6), I made a few changes to fonts that in CS3 before I had CC bought, but I tried one of the files transferred directly into CC instead of CS3 back and he still has the same problem.

  4. the file I linked IS an eps, I always do an eps because with all my files I leave the fonts in the file have and save a second file, the eps where I saw all the fonts to save all of the possible problems of fonts. But you think that I shouldn't do this?

  5. you can see the lines in Indesign only when high-quality screen, they do not seem to remain in the same position, but at 100% and 200%, they are quite noticeable while 600% zoom, they become less bright. These are dotted lines, they appear differently in each different photograph. I'm not export in PDF, a jpeg file because its for on a Web site. If the lines are perceptible in the jpeg format. I just tried a pdf and they are also in the pdf file. We did not think that what was happening only to images, but in a single file where there is a shadow on the text, he did boxing odd sam-lines around the text.

  6.I exports the JPEG from Indesign CC

  7. I open the jpeg in Photoshop.

  8. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656214/ScreenShot2014-07-24at5.46.13pm.png https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656215/450-188/Screen5.46.40pm.png pulled2014-07-24

  9 seem to stay the same size. You don't see them at all in illustrator eps files.

  10. I can't talk about it. How would know that? Where is that located setting? Thank you

  11. I don't know how to look for color mode - modes are that indesign CC is in CMYK mode. Illustrator CMYK. But when I export as a jpeg I change into RGB in the export process. How can I find the color space? I'm not very technical minded. I'm sorry. That's why I freak out when I get questions like this. I thank very you much for trying to help me.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the https://forums.adobe.com/message/6578871#6578871

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page:

  To unsubscribe from this thread, please visit the message page to. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in InDesign, by e-mail or at the Adobe Community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

• Adobe first/Media Encoder CC Crash when exporting video for ~ 25 min (Mac)

  Specifications of the laptop:

  OS X Version of El Capitan 10.11.4

  2.5 GHz Intel Core i7 processor

  16 GB memory

  Iris Pro 1536 Intel graphics card

  Problem:

  Adobe Premiere and Media Encoder CC constantly crash when I try to export the sequence of a project which is roughly ~ 25 minutes in length, H.264.

  The effects are used throughout the project, but only the base dissolves and black-and-white/contrast effects. Images comes from several sources, but all of the same mp4 file and type frame rates. There are also several PNG files in the Assembly, including the one I used to "frame" the movie to make it look more like images from other sources. Yet once, nothing complicated, not even a long dissolve (dissolved all is literally 2/24 frames in length).

  Split the video into sections and exporting separately are no problem, even when comparing a relatively short section of 4 minutes for a much bigger and more focused on the effects of section 11 minutes. Needless to say, I really, really, really prefer does not export this video into sections. The intended destination is youtube, and I just want everything in an own mp4, not two 12-minute videos.

  After some digging, I found similar problems reported on these and others and was especially deplore the possibility that my power supply is not large enough to cope, but it's still very confused. My MacBook is not 'stop', and as far as I could see, the Iris Intel Pro should have been sufficient even without a graph 5100 graphics adapter Pro 5200 or; as in the past I've already exported MUCH larger files, ranging from 35 to 85 minutes.

  solved by downloading latest driver for Nvidia CUDA for Mac - really just a problem with the Mercury playback engine. Guess OpenCL was not simply cut to get the type of work I was doing.

  Here is a convenient link to the latest CUDA for Mac drivers for all who encounter similar problems with export in Adobe Premiere Pro Media Encoder CC or CC: drivers CUDA for MAC Archive | NVIDIA

• I do not see my images when exporting to HTML

  For some strange reason, my images are just mark-up when I export the page I'm working to HTML

  Once I have download the file on the site it is fine but I don't know how to get the pictures back locally.

  Can someone tell me please in the right direction?

  Export the site in html format, you should get the assets/images folders and these will include the content of the page.

  If existing exported site does not show the files, please try to export as html in a new folder and check.

  Also, after export if you view the page locally in the browser then it should show up the images if the export is performed correctly.

  Thank you

  Sanjit

• Loss of the size of the image when exporting .tif

  I have a series of .tif images that have original dimensions of ~ 4700 x 4700. However, when I open them in illustrator, they invariably under ~ 1750 x 1750. TIF, even if no changes have been made. How to preserve the size of the image?

  Lol Illustrator will always respect the resolution setting. You will need to put the image in Illustrator, if you want to keep the resolution.

• its a bit faster as images when exporting PRE9 on DVD

  Hi, I just finished a film of first items cut 9.

  All right. I'm doing a final rendering by pressing the tab back. Can I change my DVD

  menus. Then I save the project and burn a dvd.

  So far so good.

  The dvd is very nice... expect when talking, the sound is coming from a quarter of a second too early, before even opening the mouth, which is very worrying. How can I solve this problem?

  Use sharing/computer/AVI to DV - AVI.

  If there is no synchronization issues, open a new project, using the DV widescreen settings and import it as AVI. Place the AVI file on your timeline and create your DVD.

  This DVD will be no synchronization issues.

• How to include timestamp when exporting?

  Hello

  I leave the timestamp on my images when exporting from lightroom. How can I do so?

  Thank you!

  Check this: export images from Lightroom stamped with geotag information | Nick Nolte Wx

  You need LR/Mogrify2 and ImageMagick

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes

• FCPX is cut my short final project some images when I export.

  I have been editing on FCPX for a few years now and only stumbled upon this problem, this last month. I work with six and one half second publishes short and share on my iTunes movies at home. Every time I share the video or export it, even by other means, FCPX will cut my project a few frames. It becomes extremely irritating because the videos loop, or the last clip can be held until the end I tried several ways to solve this problem. Like the confection to change deliberately any longer so that FCPX it shortens the length I wanted initially it. But in every way that I do this, it just stripes as he did before and then adds the images of the remains. I also have this looked and tried different ways to export. It simply doesn't get it. I hope someone has an idea and can help me!

  I work with: Final Cut Pro version 10.2.2

  My computer is running: OS X Yosemite version 10.10.4

  Thank you!! BTW, I'm a 14 year girl, who does not many peers as edit, so I'm a little stuck...

  A screenshot of your Timeline would help.  Make sure that you have nothing selected in the pane calendar before exporting it.  Are you a master file when exporting?  What are the settings?

• Ignore no graphic files when adding images to file table

  Hello

  I read images that are stored in a folder in a picture Board. I have a small problem when an image no (using .png) file is present.

  What I tried, is to use a structure case to check if the file extension is a png image (if it is a png, then add to the table), if is not a png file, then the case of false is executed and a blank is inserted in the table in the picture, as I selected for "use default if the thread continues. What I would like to end, it's so he can ignore all non image files and have a range of image with non whites.

  I honestly don't know what to do.

  Could someone please offer advice? Let me know if you want more information.

  Kind regards

  Richard

  Use a server model files when you upload your files in the folder, then you don't need to sort files according - Simple

  James

• . Files NEF (Nikon D600) in Camera Raw (bridge CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good.

  . Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.

  As it appears in Camera Raw

  

  Exported

  

  In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.

• When exporting my image in LR I select my brand of water in the drop-down list. Then I need to select 'Edit watermark' since the same drop-down menu in order to replace it. When I do that and click 'done' the watermark disappears in the export me

  When exporting my image in LR I select my brand of water in the drop-down list. Then I need to select 'Edit watermark' since the same drop-down menu in order to replace it. When I do that and click 'done' the watermark disappears in the box menu to export. When I click on "Export" the image exports WITHOUT my watermark. Help, please. As I did about everything that has been suggested in this forum and I still have this problem.

  I saw that too. For now, the workaround is that if you select 'Edit watermark,' when you are done editing be sure to reselect the same watermark. If you do not, the watermark menu will be empty.

  It seems to be a known bug that occurs only in the current version. If all goes well, it can be fixed in the next update. There is a page for her on the Photoshop/Lightroom Feedback site. I've added my vote to the page:

  LIGHTROOM CC - watermark on the question of export

• use lightroom 5.7.1 does not all meta-information are copied when exporting images

  use lightroom 5.7.1 not all meta-information are copied when exporting images: City and country are not copied, even if this information is displayed when I open the original file in photoshop. If I export this file through lightroom, the information disappears.

  Anyone know how to fix this?

  In the export dialog box, go to the metadata section and make sure that you have disabled "remove location information.

• First Pro CC crashes when exporting h.264

  I have shot some footage in AVCHD using a panasonic hmc80, edited two sequences in the same project, a short about 8 minutes, which I exported to the fine H.264 format and a second in 36 minutes that crashes when exporting h.264, exporting to approximately 8 to 10 Mbit / s.  I have tried mpeg2 and exported correctly.  I updated from the first and windows and checked drivers such as Nvidia, all of this to date.  I use a matrox mxo2 as an e/s has no MAXIMUM.  Same Setup worked well with first cs6 for about six months without any problem. It is a windows system 8 I7 with 4 disks in raid zero for media and a separate player previews and export.  I also tried the FLV and it also crashed.

  The error message Windows "Adobe Premiere Pro CC has stopped working" collects more information about the problem.  I press cancel on the error of the box and first stop.  In fact the same thing happened once while I was sitting right on the timeline, take a break, he did the same thing and stopped, I was not made or export or do anything.  I have closed all the programs, including my anti virus software to make sure that wasn't the problem, but kept stopping.  I used to do some audio adjustments on a few clips I've done in the past with CS6 hearing...

  I tried to open the project in CS6 but received a message that the project is damaged and cannot be opened. However, the project opens and plays fine CC where I created it originally. I have inspected the timeline and made the small part of locations that it stops the function of percentage completed without problem.  He stopped at 20 percent, 55 percent and 60 to 70 percent several times.

  Finally found the problem.  Hope this helps other casual users like me.  Originally when I started editing I dissociated video audio to audio specific modifications. It's a game of the game session only and talking heads were not in on it.  Once I finished editing I've linked audio video back together.  After I inspected carefully the timeline by zooming in to check every edit I was out of sync on one of my edits and he had a red - 4 video and a + 4 more on audio right on the clips.  After having to separate the tracks again that the red numbers went away and of course had an export successful h.264 after at least a dozen crashes.     What is funny about this is I had an export successful with mpeg2 after continuous h.264 and flv hangs until this fix.

• Why Muse does not change the names of certain images or property when exporting to HTML format?

  Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?

  General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).

  The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.

  If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).