Loss of the size of the image when exporting .tif

Similar Questions

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• Lines on images when exporting Indesign to JPEG

  I get lines on the images when you export a jpeg file to indesign (with links to illustrator who have incorporated pictures into feathers). Help, please

  The simple solution: do not use EPS. Use HAVE with PDF compatibility. No vector fonts, nest them.

  Von meinem iPhone gesendet

  Am 24.07.2014 um 10:05 wrote Kelly Deane [email protected]>:

  Lines on images when exporting Indesign to JPEG

  created by Kelly Deane in InDesign - discover complete discussion

  Hey Willi,

  Sorry I'm new to this. Here are the answers to your questions and I hope you can give some tips.

  1 OSX 10.9.2

  2 indesign CC2014 (I just started to use during the last two weeks)

  3 illustrator CS3 (files that have been given to me, have been created to CS6), I made a few changes to fonts that in CS3 before I had CC bought, but I tried one of the files transferred directly into CC instead of CS3 back and he still has the same problem.

  4. the file I linked IS an eps, I always do an eps because with all my files I leave the fonts in the file have and save a second file, the eps where I saw all the fonts to save all of the possible problems of fonts. But you think that I shouldn't do this?

  5. you can see the lines in Indesign only when high-quality screen, they do not seem to remain in the same position, but at 100% and 200%, they are quite noticeable while 600% zoom, they become less bright. These are dotted lines, they appear differently in each different photograph. I'm not export in PDF, a jpeg file because its for on a Web site. If the lines are perceptible in the jpeg format. I just tried a pdf and they are also in the pdf file. We did not think that what was happening only to images, but in a single file where there is a shadow on the text, he did boxing odd sam-lines around the text.

  6.I exports the JPEG from Indesign CC

  7. I open the jpeg in Photoshop.

  8. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656214/ScreenShot2014-07-24at5.46.13pm.png https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6578871-656215/450-188/Screen5.46.40pm.png pulled2014-07-24

  9 seem to stay the same size. You don't see them at all in illustrator eps files.

  10. I can't talk about it. How would know that? Where is that located setting? Thank you

  11. I don't know how to look for color mode - modes are that indesign CC is in CMYK mode. Illustrator CMYK. But when I export as a jpeg I change into RGB in the export process. How can I find the color space? I'm not very technical minded. I'm sorry. That's why I freak out when I get questions like this. I thank very you much for trying to help me.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the https://forums.adobe.com/message/6578871#6578871

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page:

  To unsubscribe from this thread, please visit the message page to. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in InDesign, by e-mail or at the Adobe Community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

• How do I keep the size of an Image when it is placed on a new canvas?

  I've worked with a lot of different Photoshops, but recently, I was in another computer so I just Photoshop Elements. I was excited about its use and opens a blank canvas to start working with. When I pasted into another image, he immediately reduced the image to fit at the height of the canvas, which is not what I wanted. I want the image to maintain full-size when pasted in the new canvas.

  I've scoured Google for an answer to this, but the answers do not work, I can not find them or my mind is not enough common sense to understand what they are saying about tech.

  Any help would be greatly appreciated. Thank you!

  Do you really mean that you pasted, or a drag you to the photo tray? If it is a bug known - see here for workarounds: http://forums.adobe.com/thread/1393774?tstart=0.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• not the same size of the image when I import it

  I want to import an e imagexactly the same size he is, but I can't do...

  someone at - it an idea? Thank you.

  I'm using flash pro cs5.

  Hi Jakob,

  Try this first-

  (1) Insert the following code into a new document and check the system screenDPI:

  import flash.system.Capabilities;

  trace ("Capabilities.screenDPI:" + Capabilities.screenDPI);

  (2) If for example, the output is 72 dpi, when you import an image, it seems that Flash is resized to match what he thinks it's the resolution of the screen and in this case, its 72 dpi. So if the image has a higher resolution, he dimensionnera it down.

  You can try the following-

  Create an image in Photoshop with say 300 dpi. Create a new one with a 72 dpi. Import both of them in Flash. The first image will be scaled down, but the second image retains its original size.

  The solution is to make sure the graphic that you import is 72 dpi resolution.

  You can use an image editor like IrfanView to check or adjust the DPI of the image that you use.

  Let me know if it helps.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team.

• Change the size of the image when I click it.

  I want to have the effect, I hover over or click on a picture and it gets bigger. But without having to open a new page. It must just zoom up a little bit. Is this possible? Thank you

  Hey Unterwaldt.

  That proposed Parikshit was to increase the size of the rectangle of the size of working capital that you have indicated in the second screenshot and in normal state uses the smaller image, but that the approach will trigger the effect as soon as you enter the rectangle and roll over not exactly part of the image.

  A better way to do this would use the Composition Widget - ToolTips. You can place the trigger on top of your image and give him a void fill and then place the target where you want with the big picture, be triggered by the substitution effect and hide as soon as the mouse rollsout.

  I hope this helps.

  - Abhishek Maurya

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• Removal of destination of the image when the mouse is on document

  I have Adobe Acrobat Pro 9.   I want to delete the destination of the images used in the document image when the mouse is players above them.  Doesn't look good.

  Tried to save it and open with normal adobe reader and still have the same question.

  Help, please

  Thank you

  For example.

  With comtemporary versions of MS Word the file name of the inserted picture is, by default, placed in the alternate text field.

  With the inserted image, you will see a bounding box.
  Right-click to open the context menu and select "size".
  The "Size" dialog box is presented.
  You will see two tabs. The 'Alt text' tab.
  The value provided for the replacement text field will be the name of the image file.

  If your PDF file does not need to be accessible (i.e. ISO 14289-1 compatible PDF) then simply leave the value empty alternative text.

  If your PDF should be available then provide something meaningful for the value of the replacement text.

  

  Be well...

• Loss of the battery when the Satellite C50D - off A00L

  Hello world

  I was hoping that someone could help me. I recently bought a laptop Toshiba Satellite C50D - A00L that came with Windows 8 is installed.

  I have trouble with the loss of the laptop battery power when it is turned off.
  I had a full load and off, but when I turned it back three days later he was up to 50% of power.
  I had spent it in airplane mode (I was off internet reception) to try to stop the loss of power - the case wherever he was somehow looking for information for apps.

  I am all of these ideas, and I was wondering if it was something to do with my laptop or something that happens frequently with laptops in general.
  Any help would be appreciated!

  Hello
  There are some some options and settings that should be checked.
  First access the BIOS by pressing the F2 key and in the BIOS settings disable the Wake Up on LAN option. In most cases disabling this setting you would help prevent losses of battery power.

  Secondly I recommend that you perform a complete shutdown of Windows 8 (or Win 8.1)
  The system of Windows 8 keeps Notepad by default, but it defines the hybrid unit stop mode.

  Please check this document how to perform complete stop down.
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

• Hide the image when sending as an attachment in Windows Mail

  When sending an attachment in Windows Mail images, the image appears on the body of the email. How can he be hidden?

  Hi Agent CU v-13doza

   

  To prevent the display of Windows Mail attached pictures in the message, you can follow the steps mentioned below and check:

  a. ensure that Windows Mail does not work.

  b. press Windows + R.

  c. Type "regedit" (without the quotes). Click OK.

  d. for Windows Mail:

  Go in HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  e. Select Edition | New | DWORD (32-bit) value in the menu.

  f. Type "Automatically Inline Images" (again without the quotes).

  g. press ENTER.

  h. check the column data of automatically Images Inline said 0x00000000 (0)

  ·          If it isn't, or if you already have a key automatically Images online.

  ·          Double-click on automatically Images online.

  ·          Type '0' (not including the quotes) in value data: and

  ·          Click on OK.

  i. close the registry editor.

  j. start Windows Mail and check.

   

  I hope this helps.

• Text the PIN in the center of the image when using fluid width

  Dear fellow users Adobe Muse,

  I have a some problems pasting blocks of text for the picture frames when you use layout fluid width.

  What I want is to have three images side by side and a text centered on each photo.

  When my browser window resizing pictures fit perfectly, but the text does not follow.

  I tried to classify, but it does not help.

  
  

  Is it possible to lock text block so that it is always at the center of an image?

  
  

  See the images under (the first showing what I'm after and the other showing what it looks like when resizing)

  

  

  Try the workaround mentioned in this post: Re: text on reactive image?

  Best,

  Anna

• Preserving the image when resizing

  I wonder if there is a way to preserve the resolution of the images during the re-sizing to fit on a Web page? Here is a link to the page I am working on Portland SEO-SEO Hitz Epic thanks.

  Hello

  What version # of Wordpress do you use? Later is 4.4.2 it use srcset = html markup that adds to the size of the image in the content for mobile devices.

  Automagically Wordpress downsample JPEG at 90% quality. (I use a PHP code snippet to fix quality at 100%). Or you can use PNG.

  For your slider, best to use images of quality even save to the same size width (in fact the 3 images are: (1925px, 1246px, 960px) wide.)

  The cursor is full width of the window of the browser using CSS style: background-size: cover; (and expand images that are smaller than the browser window).

  Stone

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.