First Pro/Audition cs5.5

Similar Questions

• Reading first Pro/Encore CS5 problems

  I managed to create a DVD (of a hockey practice) by Premiere Pro (linked to yet) without error. It renders correctly on 3 different computers to Windows 7 through Windows Media Player, but I have tried in my standalone DVD player and it won't even read the disc. This player is older, but it does not play movies rented without any problem.

  I tried the DVD that I created on two other computers running the operating system XP with Windows media player. He played an a XP computer but not the other. On the XP computers who was able to read the DVD, when suddenly included a skater who was moving quickly, the image of the skater resembled its change of vertical lines. If the static or slow suddenly moving parts are not deformed look. There is no distortion on computers running OS W7.

  Since I'm new ovbiously in this process, I wondered:

  1. why XP computers (and my standard DVD player) are not able to play the video and what I can do to compensate for if a person who wants to see this DVD XP or an older DVD player.

  2. why the other player display objects moving quickly as distorted (and I can it compensate for).

  Thanks to all those who can help you.

  Well, I think that your problem is in the type of the floppy disk that you use. Typically the old DVD players and dvd rom is read-only DVD-R and control of speed not faster then 4 x.

  Also the discs rent you are slightly different, then those you burn. First of all they are DVD-R, second-they are stamped not burned, of much better quality. We must also look at what rate burn you your DVD. Some former players can play only 7mbps. and some better brands can play up to 9 Mbps. And sometimes Audio should be mpeg2 only for older players.

  So, try different dvd, graver burn at a lower speed, try to burn with a different bitrate, make sure that your audio codec is Dolby digital or mpeg2 for audio.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• Major display problem with Audition CS5.5 on Surface Pro 4 Tablet

  Hi people,

  I just got a new Microsoft Surface Pro 4 tablet, so I can edit on the go more easily than with my old laptop. I use Audition CS5.5, because I am a podcaster and radio producer, and it works wonderfully for these tasks. Unfortunately, when I installed hearing on this new tablet, I discovered a major compatibility issue. All text and buttons display so small that the program is essentially unusable.

  

  I tried to play with the display settings on the Surface, but they seem to have no effect on hearing. Even when I get the settings "change the size of the text, apps and other elements ' maximum, it has no effect on how the hearing poster (even if she handicap other programs).

  

  So I tried contacting Adobe via Facebook, and everything they said it was "Hi Chris, see if this article helps you to: . http://bit.LY/24jts28 "Thanks , ^ KM. Which I linked to an article from Microsoft. When I went through the troubleshooting process, however, he suggested 1) the same thing, I tried 2) communicating with Adobe or 3) buy the new version of the hearing.

  

  And earlier I tried calling technical support and they told me that they don't offer phone support for tablets.

  I am extremely frustrated. I love this piece of software and it would be ridiculous to pay a monthly subscription for the new version just change the display settings. Was Adobe really this careless with the design of this product, and they have now abandoned it? What can I do to solve this problem?

  Thanks for any help.

  -Chris

  Support should not consider the 4 Surface Pro tablet, from a support perspective, it's a PC.  I'm sorry to hear that you who were respected.

  Richard is correct, in CS5.5 we simply don't HiDPI screens on the piece of road, and you will probably find that's true with many Adobe applications since that time.

  In addition, as Richard has pointed out, in recent versions we did some work to support HiDPI screens as well as some of the capabilities of the touch Surface.  Here are two tweets I sent to a customer showing on my personal 3 Surface Pro:

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/owizvYIbg0".

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/Zw3NI41rMG".

• First Pro CS5 'Install' is damaged

  Hello!

  I'm unable to install the first Pro CS5, the disk appears to be damaged. I've been using Illustrator, Photoshop, Indesign, AfterEffects CS5, I admit they get more glitchy with age (closing suddenly)- so I don't know if it's a technical problem with my computer, or maybe I do not download the right choice? I downloaded the program by clicking on Download Adobe Creative Suite 5 products. I would appreciate help. Thank you!

  FYI: I have a MacBook Pro (early 2011), OS X El Capitan Version 10.11.3, processor 2.3 Ghz Intel Core i7, 8 GB memory, AMD Radeon HD 6750 M 1024 MB graphics card.

  

  CS5 is released before the security feature of the CMA, requiring Gatekeeper by default app be sign before they will be installed.

  The solution is to temporarily disable this functionality in security & her preferences setting "Anywhere", before you open the .dmg and running the installation.

  

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• using first pro cs5.5, when I opened the project opens as first cloud creative pro and asks me to renew my subscription which was canceled less than a year ago help needed please keith

  Why my project first pro cs5.5 opened as creative cloud when I do subscribe to creative cloud keith

  Thank you for your help no I don't have any apps cc on the computer, but what I did to restore to a previous date pre windows 10 and that seems to have solved the problem many thanks again keith

• After effects CS5 work on first Pro CC?

  I've been flip flop on the idea of the CC for awhile now. I'm really looking for subscribing to first Pro CC just because of the ability of the chain stabilizer. I currently don't mess around too deep anyway with After Effects, but I'd be able to use my CS5 After Effects with CC first? Or would I need to get the complete suite?

  Also is there any project known doing them a special production just as how they package photography for?

  You can use CS5 'by' CC, they just don't fit with the other. Things like DynamicLink never work on the same level of version for simple technical reasons and CS5 simply did not have many of these features to start, we're talking essentially completely separate workflows where everything is transferred only as renderings clips.

  Mylenium

• NVIDIA GeForce GTX 750 first Pro CS5 compatibility

  NVIDIA GeForce GTX 750 4 GB DDR3

  I'm on the purchase of a new pc that has this pre-installed video card.

  Do you know if its compatible with First Pro CS5 and the rest of the programs in this collection:

  Still, After Effects, Photoshop, Illustrator etc. ?

  You enjoy letting me know that the new machine is not cheap and I want to make sure.

  I use Windows 7 Pro.

  Thxs.

  The CUDA Hack:

  enable CUDA?

• I think I need to re install off my disks again. When I ask first Pro CS5 to send my project to again, still opens but did not receive my film sequence. How can I re install again only without upsetting my film?

  Hello. I have following first Pro CS5 on Windows. Can you advise me how do to re install again off my records without affecting any of my Premier Pro film please?

  I ask Pro send the sequence of film through dynamic links in again so that I can burn the movie to a disc.

  Still doesn't open, but the sequence did not arrive to Pro.

  Last night the sequence came in again but took forever to transcribe, and I finally canceled the process as it appeared to get stuck and have not completely to writing on the disc.

  This morning the sequence are not yet in still.

  Very frustrating when I have a 4 hour movie I want to write to Bluray so I created now 4 separate sequences and try burning them to DVD in the chapters of 1 h.

  Hope someone can help me with this. See you soon. Janice

  Reinstall still will not affect your movies.

  But I would like to make send to still and do the transcoding in the first use of the Media Encoder.

  Use the Bluray H.264 preset for BluRay. For DVD use mpeg2 dvd preset and fields is higher.

  In particular, I would make for DVD transcoding with first as in CS5 will still reverse fields.

• First Pro CS5.5 quit unexpectedly. Mac 10.10.2.

  Hey there,

  My Mac has just started popping up with the box of 'first Pro CS5.5 close unexpectedly.  Nothing has been done differently and the program works for years.  Any help?

  My Mac is a 17 2011 "and currently has OSX Yosemite 10.10.2.

  

  Problem solved.

  I couldn't find the Colorista file for some reason any. I looked at red giant through Finder (the company that manufactures the Colorista) and there was an application uninstall program they provide. In this App Uninstaller was able to uninstall the Application Colorista. After uninstalling, everything works fine.  Thanks for the help guys!

• First pro CS5.5 hangs at the opening.

  Hello

  I' am having trouble getting the first pro CS5.5 to run. When opeing the program from the startup screen appears and the window main lance and runs like this until she is forced closed. All other adobe software is running.

  

  I tried the following:

  • Reset.
  • Prime Minister to delete the preference files.
  • Reinsall first.
  • Updated first 5.5.2.
  • Updated GPU drivers.
  • Updated drivers GPU beta.

  System Specs:

  • Windows 7 home 64-bit
  • I7 2600
  • 16 GB OF RAM
  • ATI 5770

  The Prime Minister was runing on this machine before I reinstalled windows a few weeks ago.

  Solution: Buy new GPU, re - install windows.