problems of Windows vista appearance - is no longer able to change the theme
original title: problems of windows vista appearance
When I logged on my computer today, the theme was changed on my windows vista Home premium. I tried to change my appearance options for vista, but all my options of vista are gone, I can only chose classic and standard. Can someone help me get my system works like the original please?
Hi MikeCook30,
1. did you of recent changes on the system?
Method 1:
You can try to run the aero Fixit and check out them.
Method 2:
Alternatively, you can try to restart the service of themes and check for the issue:
a. Click Start, type services in start search and press ENTER...
b. in the list of services, click themes and then click Properties.
c. under the general tab, click Automatic in the startup type list.
d. under the general tab, click Start under the service status and then click apply and then click ok.
Hope this information is useful.
Tags: Windows
Similar Questions
-
original title: problems with Windows VISTA update
I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.
- 9 47 code
- Code 800070002
- Code D 80024200.
Is there a resolution to do the same thing?
Hello
Did you change your computer?
I suggest you to follow the methods and check.
Method 1:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareMethod 3:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
problems with windows vista 64-bit. I did not drive, the PC is HP brand,
Windows does not start. a recent hardware or software change might be the cause.
1 insert the disc
2. choose the language
3 click on repairIf no disk so forth and so
file: \boot\bcd
status: 0xc000000fI can't access safe mode or recovery mode through the f - keys for some reason, the only things that I can get to are the installation and the bios screen. tried pulling the cord/battery and unplugging everything, even tried using WinRE neosmart but nothing not done, Im at my intelligence stop there...
any suggestions?
Hello
If you do a cover, here is the information of HP:
"Recover Windows Vista operating system using HP Recovery"
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703
See you soon.
-
Hi, I'm new (very) to Illustrator so please go easy. I'm in a bit of a pickle and would very much help to get out!
I created an illustration using the pen tool, making a series of paths open and closed (below), all stroked them in the color purple. I then used the Shapebuilder Ranger a few areas of intersection.
Later, I started using live paint to color block the form contained in the paths, however, when I try to change the outline of these 'forms' that won't happen.
I tried releasing the images of live paint and changing the line color of the sketch (i.e. opening and closing original tracks), but this does not work either.
Any advice?
Thanks in advance,
Will be
Inside a live paint group you must activate the coloring of the traits.
To do this, double-click the live paint tool.
When you expand a live paint group, fills and strokes is separated. You get a group that has all the traits and another which has fillings.
You will need to inspect it in the layers panel, and then select the Group of traits in order to change.
-
Satellite A200-23W: problem installing Windows Vista
Hello..
I now that this topic is discussed several times before, but after trying many solutions of the forum and some of my only, I reached a level that it makes no sense...
First off I would like to explain what I do for a living, it has to do with IT and that is what makes it even more tempting for me.
2 days ago a friend bought a Toshiba A200-23W. The first thing I always do when I buy a new laptop is to format it and install a clean Windows operating system.
After my first attempt, I realized that I have to install first the matrix storage driver.I downloaded the driver from toshiba place related to my model. (Intel Matrix Storage Manager - 7.5.0.1017).
I created a usb key with the required driver files:iaAhci.inf,
iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oemin the folder (F6flpy) of the (Intel Matrix Storage Manager) you can copy them to the root of the USB stick.
When the form "Where you want to install windows" windows Vista appear I select load the driver, and then by clicking (Browse), I select the USB drive as source for my drivers.
The (Intel(r) 82801HEM/HBM SATA AHCI Controller) will automatically appear as a choice and by clicking on the (Next) the process of the pilot installation begins.
So far so good..Here's where things get complicated...
When Vista back to the form "Where you want to install windows", even my system has 2 x 200 GG HDD only 200 GB HARD drive appears in the list...Selections of 'New' Partition, or a Partition of 'Delete' are disabled.
and even when I click 'Next' for selected HD a windows message:"Windows has no determine if this computer contains a valid system volume."
I'd appreciate your help...
Thank you in advance...
George P.Hello
You cannot format the HARD disk or delete the partition because this would remove the SATA driver too, and the HARD drive would not be recognized by Vista!
Therefore, you need to install the OS on the HARD drive that is displayed in the installation program.
-
Problems with Windows Vista update error code I get is Code: 80096001
Hi gang,.
I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.
Thank you
What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?
You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.
(When was the last time you checked your system for malicious programs?)
Suggest you try to have the system scanned both of the following in this order - do not jump...
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/products/malwarebytes_free>
(MBAM) Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
In addition, scan with the free Version of (SAS)
http://SUPERAntiSpyware.com/superantispywarefreevspro.html >
How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>
ESET Online Scanner
http://www.eset.EU/ESET-online-scanner>
Access the article KB971058 via Internet Explorer (only)
If no malware is present - How to reset components Windows Updates?
http://support.Microsoft.com/kb/971058>
Download and Save the fix it 50202 from the page above.
Close all the open browsers and programs prior to execution of the fix it.
Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.
When he finished, check if download updates now.
If the updates are still not download after you run it, then run it again and choose his Aggressive mode.
Then reboot and see if the download updates now.
UTC/GMT is 19:30 on Friday, October 7, 2011
-
Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100
original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100
My checksur.log said
=================================Preparation of control system was updated.Binary version 6.0.6002.22441Version 9.0 package2011-06-29 15:32Checking Windows Service PackagesChecking of manifests package and catalogs(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: namChecking package WatchlistWatchlist checkingChecking packagesControl components storeHello
These should help to resolve the problem:
How to fix Windows Vista error 800b0100 update
http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/Error Code 800b0100 in Windows Update
http://www.instantvista.com/800B0100.htmlError message when you try to use Microsoft Update or Windows Update Web sites to install
updates: "0x800B0100.
http://support.Microsoft.com/kb/956702
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821==========================================================================
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366You select Download - SAVE? After download go where you put it and right click
on and RUN as administrator.Download Service Pack 2 x 86 32 bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = inDownload Service Pack 2 x 64 64-bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = inCreate a new ADMIN account with your password - same then REBOOT (do not logoff) and
log on to the new account and try the download.How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791/Service Pack Center
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs================================================================
If necessary, you can get free reports of incidents however generally above allows to solve this problem.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
original title: could not resolve the problem of Windows Vista Service Pack 2 update!
Hey there,
I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!
Thank you very much
UD
Hi Electrocuteud,
You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.
-
How to solve this problem on Windows Vista (I can't describe)
Hello
I hope to help me and solve my problem on Windows Vista
On my Look you can issue it on Youtube: http://www.youtube.com/watch?v=z8fNyA3QREI
Thank you
Check my solution on this page: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/d60243f4-6e14-4bd6-aed4-743b5cb790d2/#a6cdc490-7b78-48a8-961d-73d73ee0c870.
-
I have a problem of Windows Vista permission/access denied
E-mail address is removed from the privacy * I have a problem in Windows Vista in which case there are 2 profiles that are both administrators. The problem is that, while trying to do a repair on the C drive to free up space, I get the message that ACCESS is denied. I can't free transer data on external drive Western 1 TB space, kind of frustrating. 0 bytes remain & access continues to be denied. Property, permissions are not allowing me to correct this situation. Justin [removed personal information]
Hello
· What is the case for the two user accounts?
You can try to create a new user account with administrator privileges and check if you are able to transfer the files. If you are able to transfer files using the new user account, then this is the problem with the permissions on the drive.
To apply permissions to a file or a folder
(a) right click on drive C:\ then clickProperties.
(b) click on anti-terrorism tab and then click on edit.
(c) do one of the following:
· To set permissions for a user who is not quoted underGroup or user names, click Add, type the name of the user or group, click OK, select the permissions, and then click OK.
· To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions, and then click OK.
Also, check if your computer is infected with a virus.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
Message: Installation error prevented the service pack 2 windows systems (KB948465)http://support.Microsoft.com/kb/956702
«Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»
Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:
- Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
- Try to install updates again.
http://support.Microsoft.com/kb/947821/
"Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"
If the above solves the problem:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include this error Code, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
- Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
-
Update Windows Vista error code A 8024, 000 after replacing the HARD drive
Hello
I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).
After that I used the recovery CD, Windows Update gives me error code A 8024, 000.
I tried the solution provided in this thread, but did not work for me:
I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)
Any help is appreciated.
Thank you.
Eugen
Hello
1. which utility Microsoft Fixit did you tried to load?
2. what happened when you tried to load the Microsoft Fixit utility?
3. what was the error message when you try to update the installer?
Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.The problem with Microsoft Windows Update is not working:
http://support.Microsoft.com/mats/windows_update/Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.Scan sfc enforcement procedure:
a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
b. click on continue or provide administrator credentials if prompted.
c. in the type in the following command prompt window and press ENTER:sfc/scannowRefer to this article for more information:
http://support.Microsoft.com/kb/929833Method 3:
0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
http://support.Microsoft.com/kb/946414Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756/Download Windows Vista Service pack from here:
How to obtain the latest Windows Vista service pack
http://support.Microsoft.com/kb/935791Reference:
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates -
original title: hotmail
Today we had the messages he had problems for windows live. We are not able to pass anything on hotmail and computer he is slow
Hello
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.
-
* Original title: upgrade
I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?
Thank you
Jim
Hello
Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.
There is no free upgrade Vista to 7, 8.1, or 10.
Follow these steps before you buy Windows 7.
Microsoft sells more than 7; Try Amazon.com.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
@@@@@@@@@@@@@@@@@@@@@@@@
Follow these steps before buy you and upgrade (new installation) of Windows 8.1.
Microsoft sells more than 8/8.1.
Try Amazon.com, etc.
Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.
If this is not available, Windows 8.1 not install and work properly for you.
There is a lot of information in this first link from Microsoft:
Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here
"Update to Windows 8.1: FAQ".
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
"8.1 for Windows system requirements.
http://Windows.Microsoft.com/en-us/Windows-8/system-requirements
@@@@@@@@@@@@@@@@@@@@@@@
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
Windows vista 683 gb hard drive full of only the dates, how can I clean it? Fixed thanks
Windows vista 683 gb hard drive full of only the dates, how can I clean it? I have 9 GB of free space. PC still allows me to watch Netflixs. Cool
You are welcome.
See you soon.
Maybe you are looking for
-
Extract links from a crash report? Or access the history?
My computer recently crashed and I had some open links which I desperately need to get back.I do not know how to find once again as they were quite difficult to track down in the first place and I made the mistake of bookmarking is not them.I thought
-
I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this
I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this
-
My download of csv ASP page is to call: Response.ClearResponse.AddHeader "content-disposition", "attachment; filename = filename.csv ".Response.ContentType = "Content-Type: text/csv; "charset = utf - 8" When I click on the link to this ASP page, appe
-
My MacBook suddenly started working slow
Hello! I got my MacBook Pro since 2012 and it suddenly started running slow. I rebooted several times. Also, I deleted some files, but it does not work perfectly. I noticed that when I start watching the video in my MacBook, it will stop so many time
-
How can I get my Windows Gallery pictures to view and print in chiputa, not just black and white?