First Pro CC does not start!

Similar Questions

• First Pro Trial does not start

  just downloaded the CC and then I chose the Premiere Pro.  He downloaded hoever, it does not give me the option to "Start test" how open towards the top of first?  Thank you

  You MUST have a 64-bit computer and operating system... What is your computer?

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Apple MacBook Pro 2012 does not start

  2012 Apple MacBook Pro.  Does not start.  Just get the folder with the question mark.  gives possibility to restart with the ERD, but the model doesn't have a hard drive.

  Help the college student needs to access files on the hard drive for the finals.

  Thank you

  What happens when you start to recovery

  OS X: on OS X Recovery - Apple Support

  and repair/disk startup disk via disk utility which is located in the recovery of aid?

  If it is repairable so reinstall OS x, as the article says

  Also here is covered:

  On the screens, you see when you start your Mac - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Adobe Acrobat pro 2015 does not start

  Hello

  I installed Adobe Acrobat pro 2015
  on W2008R2 SP1 Terminalserver. Then, after that, I can't start the acrobat.exe. The Adobe software
  Application Manager warns that it does not work. I would be happy, if you can
  Help.

  
  
  

  APPCRASH

  Anwendungsname: PDApp.exe

  Anwendungsversion: 9.0.0.24

  Anwendungszeitstempel: 54d1cf91

  Fehlermodulname: KERNELBASE.dll

  Fehlermodulversion: 6.1.7601.19160

  Fehlermodulzeitstempel: 56bcd5c3

  Ausnahmecode: 40010006

  Ausnahmeoffset: 0000c52f

  Betriebsystemversion: 6.1.7601.2.1.0.16.7

  Gebietsschema-ID: 1031

  Zusatzinformation 1: c905

  Zusatzinformation 2: c905acd73fb492d62b693d29db51a461

  Zusatzinformation 3: eca1

  Zusatzinformation 4: eca1f0a4ce51a846384e3bcbbb2e4895

  Best regards

  Armindirk

  Hi Anurag,

  Thank you for asking. Attached files for the solution of the problem.

  Best regards

  armindirk

  Von: Anurag_Gupta

  Gesendet: Mittwoch, 19. May 2016 13:22

  Year: Herr Schwatlo

  Vacancies: Adobe Acrobat pro 2015 does not start

  Adobe Acrobat pro 2015 does not start

  created by Anurag_Guptahttps://forums.adobe.com/people/Anurag_Gupta> installation, updated, sign up for Acrobat - & discovers the discussion fullhttps://forums.adobe.com/message/8759659#8759659>

• Try to download adobe first pro, but does not appear in the computer

  Try to download adobe first pro, but does not appear in the computer

  Premiere Pro is 64-bit.

  You must run a 64-bit operating system to install and run Premiere Pro.

• Acrobat Pro XI does not start!

  Acrobat Pro XI does not start when I double click on it.

  When I check the process in windows tab, it is not yet here.

  This question is about my two PC, with Windows 8 installed.

  I tried to fix it via Control Panel and no luck.

  Any help, suggestions or corrections would be appreciated!

  Thanks in advance!

  Bill@VT, I tried to open Acrobat from the desktop and the subway without success.

  After some "trial and error", I understood the problem.

  I uninstalled Acrobat and installed again and it worked fine.  Then I went to update to Acrobat, and that's where the problem happens again - I was unable to open Acrobat.

  So, I uninstalled again installed back and disabled the update (no updates).  Now my problems are solved.  I guess the previous update is may be damaged, and that's what creates the problem - that prevent me to open Acrobat.  I hope that Adobe solves this problem, as I want to update Acrobat in the future.

  To disable the update: open Acrobat, click editing, and then Preferences, scroll to the Updater and disable the updates.

• Satellite Pro L20 does not start

  I have a new satellite pro L20 M750
  does not start
  the thing is since the first time I tried to start it it would not start.
  I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

  Thanks in advance

  Hello

  Did you check if the AC adapter is working properly?
  Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro M10 does not start

  My M10 Pro Sat will not start.
  Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

  Any suggestions? With our thanks.

  I put t know if this will help you, but what you could do is the following:
  -Unplug the power adapter, remove the battery and wait about 30 min
  -then reconnect the two parts and check to see if you can power the laptop

  It helped me in the past and maybe it will help you too.
  Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

  Welcome and good luck

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• First elements 11 does not start

  I bought a package of photoshop + elements first. Photoshop elements works fine, but

  First elements does not start after installation without errors.

  I tried to test the version and the registered version (w and w/o serialnumber)

  I tried double click on the link, the file orig., and administrator - nothing happens on the screen :-(

  I looked for the "FLEXnet" service... "it's 'sandrine' and started several times"LicenseRecovery109"(without the 0 of the starting point and w) before and after a reboot: nothing happens :-(

  I also tried installing without "windows defender": nothing happens :-(

  Using win8 64-bit on a intel core i3 with 8 GB of RAM

  Someone at - it ideas?

  The solution is absolutely and totally crazy:

  My login usual account was an admin account. Here, I tried to install photoshop elements and elements first.

  Photoshop elements worked very well - first elements could not be started.

  So I created a new admin account and changed my usual login on "standard," konto

  installed the program in the new admin account, set the property to "run as Administrator"

  and now I can start my usual account (standard) program by inserting the admin password.