First pro needs a correction of the lens for GoPro cameras

Similar Questions

• Correction of the lens for Tamron 17-50 2.8 could be better?

  This is WITHOUT the lens profile correction.

  ... and that's WITH the lens profile correction. Not very obvious, isn't it?

  Upper right corner of a photo taken with the Tamron 17-50 2.8 at 17mm 5.6.

  The cut isn't right but a funny!

  Most likely, the slope of the cut in the corner of the image is not created by the distortion of the lens, but the camera pointing down.

  When the camera is not required to level but pointing upwards or downwards, the sensor is not in parallel with the vertical lines of the Cup. It is the phenomenon of "Scheimpflug" - google for this word and you will get many results. The phenomenon of "Scheimpflug" becomes stronger towards the edges of the image.

  That's why the architecture photographers use "see photo" where you can adjust the angle of the plane of the film or digital sensor map so that it is parallel to the vertical lines of a building.

  You can adjust the tilt of the cutting with the manual vertical slider in the Correction of the lens, and you may need to adjust the horizontal slider as well. The compromise is now, your image will be severely "trapezoidal" and it's probably not what you want.

  But you can't blame the lens profile. Profile lens corrects only distortion of the lens, no distortion by the principle of "Scheimpflug.

  PS: A tilt-shift lens will also correct the distortions of the principle "Scheimpflug.

• Lightroom applying not automatic correction of the lens for M43 objectives

  Forums, there are many discussions about the automatic application of integrated objectives M43 profiles.  My problem is that Lightroom does not apply the profiles of builtin for a camera of the MDGs - em5 olympus (lens panasonic lumix 14-140 3.5 to 5.6, kit olympus 12-50), panasonic gh3 (objective 14-42).  I use of course raw format images, and I've tried Lightroom 4.4 and downloaded the latest Lightroom 5.7.1.  I started fresh with new catalogs and in each case, I have the same result.  When I go to develop and lens Corrections is NOT showing me the info button saying that a built-in profile has been applied.  ACTIVATE the PROFILE CORRECTIONS is NOT selected.  My study of the forums of the Info button should be there, but it's not.  Any ideas?

  I'm not absolutely sure, but I think that the info was introduced with LR6.

• automatic correction of the lens for iPhone4

  Automatic Correction of lens LR3.3 correctly identifies my lens Nikon NEF files, but cannot automatically identify and apply the correction to my iPhone4 JPG files. I can manually select brand/model/Profile for the iPhone4 and apply. Not a big deal, but: the user or design error? I import directly from the phone using LR import. Camera and the model appear in the EXIF data. THX

  Probably by design. I remember well, the iPhone 4 does she not model metadata of EXIF camera which distinguishes it from the previous iPhone models (for example, brand = Apple, model = iPhone).

• Manual of the lens for DSLR camera

  I have 550 digital SLR Sony and a manual Kalimar 500 mm.  I was able to use an adapter with my last Sony DSLR but do not remember the setting of the camera I had to use in the menu.

  Any ideas or suggestions?

  Thank you

  Will be

  Hi willbrecheen!

  Welcome to the community of Sony Forums.

  Set your camera A550 (M) manual exposure mode on the dial if you are shooting with a manual lens and an adapter. You should be able to shoot with your configuration.

  If my post answered your question, please mark it as "accept as a Solution.

• Correction of the lens profile in Lightroom/Photoshop

  I am fairly new to Lightroom and Photoshop, so forgive what may be very novice questions about the correction of the lens.  I've walked these tips to help, but you have not yet found information that solved the problem exactly.

  I use Lightroom CC and CC of Photoshop (running on a Mac).  I use a Nikon D750 and the objective in question is a Nikkor 24-120 f/4 VRII.  For JPEG images in question, I had tile control off in camera in order to avoid double fixing the LR/PS issue (and really have been dissatisfied correction in camera).

  Like many other people have asked about, I have some JPEG files that I want to apply the correction lens profile in LR, but none exist for that lens in JPEG.  I tried the steps that a lot of people have suggested in many forums (i.e., copy of the RAW profile which is located in the folder/Library/Application Support / Adobe / Camera Raw /..., to change all the "stCamera:CameraRawProfile ="True"' to 'False', then copy the file in the same folder and restart).  I tried to locate the new profile of lens using LR and Camera Raw in Photoshop.  I closed the program, restarted, but nothing seems to work.

  Because it did not work, I got rid of the new lens profile I copied and went in Photoshop, using the "Correction of the lens" option in the "Filters" menu (but not in Camera Raw because it does not work).  In the filter, it recognizes the lens and allowed me to make the correction of "thumbnail".

  So my questions are:

  (1) is the method of copy/text change to adapt RAW lens profile does not work for LR CC or is there another text in the file LCP to be changed to make it work? Don't know what I'm doing wrong.
  (2) apart from the inefficiency of having re - import the Photoshop file to LR are all the problems to fix the way I did it using the lens correction filter in PS?  I couldn't find any discussion who suggested doing it this way, so it was not clear to me if there was a reason to not do it instead.

  Any help is greatly appreciated.

  Could not load profile lenses looks like it would be a problem.  I wonder if your text editor removed line breaks or add or change the encoding to something different.  You could re-edit of true-false and see if things work better.  If I change a LCP on Windows I use instead of Wordpad Notepad because Notepad keeps the characters at end of line and encoding.

  The text you see list of LR may not ProfileName it can be the name of the goal or nice name for a lens or something else.  You can change the description read by the man to have a different version: v2a. 2 b v, v 2 c, etc, then you can say that is actually used.

  Or, if this description is replicated for each entry profile, then you might need to change not only one.

• Correction of the lens to mount E

  I use Lr 4.1.  I'm gross salary of a NEX-5 and NEX-7.  Under the Correction of the lens - lenses - e24, e50/1.8 profile / 1.8z and e18-200f/3.5-6.3 are not listed.  I assume that profiles for these lenses exist somewhere.  Anyone know where I can download profiles for these lenses, and tell me how to get them in Lr?

  Thank you

  You will need to download and install the Downloader Adobe Lens profile of http://labs.adobe.com/downloads/lensprofile_creator.html the link will take you to a page that includes an application to create your own and another for download.  The downloader app give should give you access to all profiles that have been uploaded to the database. From what I see both lenses you mention are in the database, but correspond to raw files only.

• correction of the lens is not available in Lightroom CC.  Where is he?

  I can not find anywhere Lens Correction in Lightroom CC.  I would be grateful for advice on how to access it.

  Hi Montmelardman,

  You will find the correction of the lens in the develop Module.

  

  If you do not see the Panel please check the link below to find the missing Panel:

  Quick Lightroom Tip: find your missing Panel | Lightroom training Laura shoe, tutorials and tips

  Please let us know if it helps.

  Concerning

  Sarika

• First pro CC (2014) problems with the audio on the .mts files

  Hello

  He is a recent problem I had when trying to play some clips in first Pro CC (2014), I import the entire private folder and some game clips as normal and others seem to have ignored audio. This causes the second half of the video for do not have audio in there at all because it's boots upwards initially. I don't know even where to start by trying to solve the problem, the only thing I've done is re import the files and put them into new folders to change the destination, it was imported from.

  Any advice would be extremely useful as it is above all preventing me from getting any work.

  Thank you!

  Hi amber1992,

  I will suggest you to go ahead and clean the media cache and cache media files folders manually.

  MAC OS: Click the go menu > go to files > ~/Library type, and then click ok. This open the user's library folder and then access the Application Support > Adobe > commune > media Cache and the Cache of media files. Delete all the files in these folders.

  Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can click on the Start button and search for type %appdata%\microsoft\windows\sendto and the Roaming folder > Adobe > commune > media Cache and the Cache of media files.

  Once done the project again and check.

  Kind regards

  Vinay

• First PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears.

  Install the 30 day trial version, but first PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears. How to fix?

  Hello

  Go to c: program files * 86:common: adobe: sl hide, rename the cache sl

  Go to c: program data: adobe: store sl: rename the store sl sl old store.

  Right click on first pro and run as admin.

  Thank you

  Arjun

• Correction of the lens in LR 5

  How to define the profile of Correction lens for my camera makeup and the lens used is the default please

  And the goal of profile by default in the Lens Correction Panel, apply the correct profile manually, and then in the box "setup" (now will show "Custom"), use the menu drop-down and select 'Save new lens default profile'... which will ensure that the future is important with this camera/lens combination will have the right profile to be assigned when you click "activate the Corrections of profile".

• 'Correction of the lens' area is gone!

  Hello

  It was there before, but now I can't find the 'Correction of the lens' area in the Module develop the LR5. Anyone an idea what I can do to activate it again?

  Thank you very much for your help!

  Kind regards

  Frank

  Right-click on another panel for example "tone curve" heading and select, lens Corrections.

• I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer.

  Original title: Canon i-SENSYS MF4450

  I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer. It was fine when I used windows xp in my old computer. But now when I bought a new one, who have Windows 8 (x 64), I don't know what to do.  Please help me!

  LFF

  Have you tried to contact Canon for a compatible driver?

• I installed the plugin for sony camera raw for model rx111 and photoshop cs4 file is unrecongnizable

  How can I get adobe cs4 to read installed the plugin for sony camera raw for model rx111

  Error reading file from photoshop cs4 is unrecongnizable

  Thanks for the reply, I'm upgrading to cs currents 2015 that the camera is again for my version of cs 4, so I'm leaving dinosaur days and of the 21st century

• Correction of the lens like Lightroom in Premiere Pro?

  Lightroom do a great job when it comes to optical Correction for virtually all of the objectives that I tried everything, yet the best tool I can find integrated at first is the tool of lens distortion that I don't think that is enough good nor accurate.

  Is there a better tool to be built, or a plugin? Trying to avoid the stand-alone software, if all this can be done within the first would be great.

  The main objective, so I'm trying to use this is a Rokinon 8 mm 3.5.

  Thank you very much!

  There is a big difference between software design for an image and that works 24/30/60 frames per second. This is why a number of Lightroom/Photoshop-esque tools are not available in PrPro or SpeedGrade. Due to the nature of the legacy as a program of special effects, there are more of these types of things 'out there'... and note, many people working this program strongly "rendering-farms" chained computers high-power rendering-out/export the results of their work. Saw say 8 12-core Xeon with 256GB RAM each and massive double-video cards working together on a single project for say 8 hours...

  So, Yes, it would be nice... and could get designed at one point. Do not hesitate to request a feature on that and understand that, although they never respond with even an automatic acknowledgement, it is how get tabulated and sent to senior managers who are those who design what teams will be support then things.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Neil