First time using Windows 7, files in Windows XP, removable disc in the process of disappearance

Similar Questions

• My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

  My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Computer is a 32-bit Dell XPS * SP2 Windows Vista (Home Premium), Internet Explorer 9 Panda anti-virus

  Nothing new and NO change has been made.

  Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Even when I hide the taskbar I always can't NOT see the background.  Thanks in advance for any help. It drives me crazy.

  Set your resolution to be higher.  Right click on your desktop, go to personalize, then choose the resolution down.  Set it to the highest setting.

• I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  Hi Shaji,

  You are referring to the methods mentioned links.

  Method 1: Fix Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search?WA=wsignin1.0

  Method 2:

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  For your reference:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helped!

• I try to add an image map for the first time using Dreamweaver CC

  I am trying to add an image map for the first time using Dreamweaver CC in an html site.

  I can get map controls is displayed when I select the image in the code, and I can select the rectangle tool.

  However, when I try to select the area of the image disappears from the section of the map of the properties viewer and I can't select the area for my hyperlink.

  What I am I missing videos online are it seems so simple, but something with my page is not allowing me to withdraw this.

  This is the code section and the image that I'm trying to add the link.

  < side class = "sidebar" >

  < img src = "images/flowchart.jpg" alt ="product dev. Flowchart">

  < / side >

  Please help or give me any advice... There might be something to do with the fact that my site is "sensitive"?

  Hello

  You could just add links to each box, but a better solution would be to use svg for this. Unfortunately, it is easier for me to write for someone who does not know svg to do.

  If you have Adobe Illustrator create your svg using this program, then it would be a case to add links manually to each box created in the svg code. SVG is an xml-based language and not a real image, even if this is how a browser will display the it.

  PZ

• for the first time using the do not know how to insert video to start editing

  for the first time using the do not know how to insert video to start editing

  First thing you need to know is that After Effects is not a video editor. First is to put some shots together to tell stories (that is changing), After Effects for creating those shots (compositing and Visual effects) and to create animated graphics.

  To use AE, start here: starting After Effects

• Windows 8 error 0x80071a91 in the process of implementation of additional components

  Hello dear friends!

  I have a problem while trying to implement additional windows components 8 (particularly I wanted to add the component of Hyper-V). At the end of the progress of the installation, I got an error a 80071, 91.

  I found the solution to use the fsutil (fsutil resource setautoreset TRUE c:\) command, but it did not help me.

  Also, I uninstalled the McAfee Internet Security (trial version), because I met the articles, it can cause the error. But nothing has changed - the error is the same.

  Please, advise what to do to avoid this error.

  Windows 8, Asus transformer book tx300.

  Best regards, Den

  Hi friends!

  For your information:

  I posted this question to the Technet (http://social.technet.microsoft.com/Forums/en-US/0281a7eb-4677-43af-b19b-b5059525ad28/windows-8-error-0x80071a91-in-the-process-of-setting-up-additional-components?forum=w8itproinstall).

  But the only solution that has helped the re-installation of the system (in the recovery menu).

  Thank you!

• Windows Mail removed access to the following dangerous attachments

  Windows Mail response when opening an email with an attachment: Windows Mail removed access to the following dangerous attachments...  I know that these attachments to be sure.  I have forwarded these work or were sent from reliable sources.  How can I access these attachments?   It is urgent for the Organization of events.

  Tools | Options | Security. Uncheck the box: "do not allow attachments...". »
   
  
   

• First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  Hi Carl U.

  You have solved this problem yet? If not, please contact support here.

  Thank you
  Kevin

• I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what happened?

  I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what has happened through Windows XP Pro?

  Has it really been uninstalled... or if only the shortcut has disappeared?

  Click Start > search, select "All files and folders", then search for photoshop.exe

  I do not have Photoshop installed, but if it's like other Adobe applications, he located in C:\Program Adobe Photoshop.

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Firefox crashes while loading images for the first time after windows starts upward

  every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
  thing I tried
  Start windows and Open firefox in safe mode (does'nt fix the problem)

  updated 13 solved the problem...!

• Can not find the Favorites of IE in bookmarks by using "import an another database" or "import html file." Default profile only in use. First time using Firefox

  HTML file (also tried htm) is exportd by IE 9 and can be opened. When imported by Firefox, it can be seen in the unsorted bookmarks bookmarks library or view all of the bookmarks.
  All read that the properties have been removed from the favorite files.
  Firefox displays a profile in APPSDATA.
  This is the first time I used Firefox and wish away IE. Can you help me please? Thank you.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

• For the first time using BMP - app ever built, plugin file error constant

  Hello - I am trying to build for the first time and many plugins are errors. I am commenting them one at a time from the XML config and one of the culprits is the plugin file that I need to use. The other is the network plugin which also gives errors. The State errors that are not compatible with CLI 6.3.0

  I know it's the plugin developer to make compatible - y at - it something somewhere that indicates which versions of the plugins are compatible with versions of BMP? How can I find out what previous version of BMP is compatible with anything?

  Also, and this might be relevant to the question - when I look at the BMP to see what are the versions that I build for, I see that apparently I'm targeting iOS4.2?

  http://www.rickluna.com/pgb_err.PNG

  In my XML I'm deploying to iOS 9 but does not change the value of GBP v 4.2

  < preference name = "deployment target" value = "9.0" / >

  DRM for suggestions!

  r

  These plugins are all using the deprecated point rating. You must use:

  etc.

  Can I ask where you got to go to? I want to assure you that the resource is updated to the correct format.