first - timeout for HTTPS access

Similar Questions

• How to set up the ASDM/HTTP access for Cisco ASA firewall

  Hi all

  I am looking for a solution / guide that will allow our ASA 5510, V8.4 (5) Firewall, ASDM version 6.4 (9) to help users Active Directory. I want to activate our administrators to access the ASA via ASDM using their AD accounts (a local administrator account also exist but not a password of General knowledge)

  Anyone would be abe to advise on a guide / Solution.

  Thank you very much

  If that you issue correctly you want active tpo AD authention for AMPS/HTTP access to the ASA. If it is correct that you have need of the following using the CLI to enable that command

  ASA-32-22 (config) # aaa authentication http console?

  set up the mode commands/options:

  LOCAL server predefined Protocol AAA 'local' tag

  Name WORD of RADIUS or GANYMEDE + aaa-server for the administrative group

  authentication

  After the console you needd to defind the name of the AD server you have configured on the SAA.

  You can do the same thing by using ASDM:

  

  Change LOCAL to the announcement that there are listed.

  I hope that answers your question.

  Thank you

  Jeet Kumar

• How to limit HTTP access for 11g Grid Control

  Hello
  
  We want to restrict HTTP and want to use only HTTPS to access the control grid.
  One please suggest what settings need to be changed.
  
  Thank you
  Paul

  Hello

  The following command has been introduced to limit access to the console for https only:

  emctl secure lock - console

  Best regards
  Vincent

• ACS5.3: stopped working https access

  For some reason I can't get more access to the web interface of our ACS 5.3 apparatus.

  Where I used to get a certificate warning first, and after that the ACS5 login screen, I now get totally unanswered more in my IE browser.

  However, I can telnet to port 443 of the unit.  And I (luckily) always ssh access the unit.  So I did a reload (sorry, microsoft patterns), but that will not solve anything.

  HTTPS access to other systems of the same browser works very well

  =================================

  Admin # sh ver

  Deploying applications engine Cisco OS version: 1.2
  ADE-OS Build Version: 1.2.0.228
  ADE-OS System Architecture: i386

  Copyright (c) 2005-2009 by Cisco Systems, Inc.
  All rights reserved.
  HostName:

  Version information for the installed applications
  ---------------------------------------------

  Cisco ACS VERSION INFORMATION
  -----------------------------
  Version: 5.3.0.40.8
  The identifier for the internal version: B.839
  Patches:
  5-3-0-40-5
  5-3-0-40-8

  =================================

  What version of IE are you using? A newer version of Internet Explorer, you cannot open secured pages that have less force encryption.

  Have you tried another browser? In case it works well with firefox or google chrome follow it please the below listed as follows:

  There could be a possibility that you have downloaded and applied some update Windows on your machine and that could have changed the level of encryption of minRSAPubKeyBitLength REG_DWORD 512 to higher values.

  The command listed below will set the registry to 512

  Go to the PC from which you access ACS > start > run > cmd > run the below listed order

  C:\Users\Employees>certutil - setreg chain\minRSAPubKeyBitLength 512

  Once you have finished, try again and let us know.

  Jatin kone
  Kind regards

  -Does the rate of useful messages-

• I downloaded the programs I needed one month when I bought my plan. Today I connect to my adobe account to download edge animate and he only gave me the trial version! How could it be? I have a plan for full access?

  I downloaded the programs I needed one month when I bought my plan. Today I connect to my adobe account to download edge animate and he only gave me the trial version! How could it be? I have a plan for full access?

  Hello

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Google TV for Flash Access support

  Hello

  
  I'm testing some Google TV devices (Sony NSZ - GT1 and NSZ - GS7).

  I would like clarification on the question of whether or not the provided on these devices with Google Chrome Flash plugin supports Flash Access.

  After the Flash access FAQ (http://www.adobe.com/products/adobe-access/faq.html), "desire of Adobe Access works with Adobe Flash Player 10.1 or later". Given that the version of Flash on these devices is a hybrid of 10.1/10.2, hoping that Flash Access would work.

  However, I did several tests and I wasn't able to make it work.

  For the first test, I used the Flash Access test site, specifically http://drmtest2.adobe.com/AccessPlayer/player.swf (player.html didn't load the Flash application unfortunately)

  For the two devices, I got the same result - when you press the icon of reading to the SVP, "State of flow" said 'play' and 'Protected DRM' 'no '. The video does not play.

  In addition, for both devices, when you press "Load DRM Metadata" in PST, I received an "Error #1009'.»

  The UDC reported the Flash version as 10.2.164.128 for the 10.2.164.113 for the NSZ - GS7 and NSZ - GT1.

  For the second test, I used a local built & hosted locally OSMF sample player, version 1.5 (taken from http://svn.code.sf.net/adobe/osmf/svn/osmf/tags/1.5gm/apps/samples/framework/OSMFPlayer), configured with the video example from the Flash Access test site (http://drmtest2.adobe.com:8080/Content/identity.f4v)

  As a reference I first tried a PC desktop browser flash plugin, and in this case I received a prompt for the user name and password; After entering these, the video played with success.

  However, when I tried this from the Chrome browser on both devices, even if the responsible OSMF player I was never presented to the prompt for the user name and password.

  Since there is no debug Flash player for Google TV, I was unable to investigate further with the device.

  Any clarification or preview support for Flash Access on Google TV would be appreciated

  Thank you

  Alex.

  Thank you for further testing.

  According to the result of your test, probably Flash Access is not supported on these Google TV...

  Thank you

  -Hiroshi

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent

• Cannot open volume for direct access?

  OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?

  Hello

  I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.

  They are completely unnecessary.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I have contacted AVG or their Forums as you say it was their program that caused the problems.

  http://free.Avg.com/us-en/support

  See you soon.

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.

• CHKDSK error: cannot open the volume for direct access.

  CHKDSK is on the machine does not work it gives me the error:

  
  Cannot open volume for direct access.
  Autochk cannot run because of an error caused by a recently installed software.
  Use the system restore feature in the control panel to restore the system to a point prior to the installation of the new software package.
  An unspecified error has occurred (766f6c756d652e63 3f1)
  
  
  
  When I run it.

  I also tried a boot following the instructions of clean boot in Microsoft (through the http://support.microsoft.com/kb/331796 URL) and then try to run a CHKDSK command-line command (cmd) prompt in an administrator account and it always gives me error 766f6c756d652e63 3f1

  I also have the CD of Windows 7 available and administrator of the computer. I don't know how to get it to make CHKDSK work correctly at startup
  Thank you

  Hello Mitcherator777,

  You can connect to your computer in normal mode or only in safe mode?

  It would be the best way to run the Chkdsk command:

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Let us know the status of your question.

  Thank you

  Marilyn

  Marilyn,

  This problem has been resolved, I contacted Microsoft directly on the phone in the time of September.
  Question has proved to be a dirty disc. as my 1 year limited manufacturer expired warranty, I have since last week bought a new HDD to solve this problem.
  Please examine this issue.
  Thank you.

• Timeout for the HTTPTransport KSoap2

  Hi all

  I have a project where I need to download a large amount of data from .NET web service to the device. I'm using KSoap2 and everything works fine until I actually start the download. I get an error "Connection Timeout".

  I tested the web service separately (from a site) and takes about 5 minutes to download. I also tested the BB project with a small amount of data to the web service itself and everything works fine. I am able to receive the returned data, but as soon as I try to download chuck raining data, the connection times out.  That said, I have 2 questions:

  1. how to specify the timeout for a connection HTTPTransport? I would like to be able to put 10 min for example to avoid time-out error.

  2. is there a limit to the amount of data the device can receive when using HTTPTransport?

  Thanks in advance,

  Daniel

  1 on timeout:

  -------------------------

  Take a look at this thread on the definition of timeout in httpConnection.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25155&query.ID=26...

  You can use the SocketConnectionEnhanced interface that allows you to set the timeout fom a direct TCP connection.

  How - to control the timeout for TCP connections via BlackBerry Mobile data system connection Service

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/How_To _...

  2. data about

  --------------------------------

  There are limits on the amount of data that can be downloaded by connection. See this article.

  What is - HTTP 413 request entity too large

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  But you can download data piece by piece. See this article.

  How - to download large files using the BlackBerry Mobile data system

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800431/How_To _...

  Concerning

  Bika

• Remove the secondary controller and tertiary high availability for each access point

  I want to remove secondary and tertiary sector controller of high availability for each access point. I have more than 900 APs associated with a Version of the WLC 8510 8.0.121.0 software. What is the best/better way to remove secondary and tertiary controller?
  Or I can create a model first. We use version 2.2

  Hello

  Easiest way:

  Yes you can do this by using the first Cisco Infrastructure, you can create a Setup AP Lightweight model to specify the name of the PDC and the IP address and specify an empty value (choose the first empty option in the drop-down list) and 0.0.0.0 for the secondary and tertiary sector controllers.  Then you can apply this model to the AP, and she must remove (virgins all) values for these fields.

  Long way:

  Yes there is no clean way to remove it from the CLI. you need to manually remove each on the AP.

  Concerning

  Remember messages useful rates

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Need to change the ACE 4710 certificate that uses the https access management

  I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is any mechanisam or availabel for the procedure to change the self signed SSL certificate?

  Ranjith,

  You can check this bug:

  CSCte42757

  Jorge