fist in the function call? and support for 32-bit system?

Similar Questions

• I have just noticed that the function drop and drag for attachments stopped working in Yahoo and Gmail. Is it because of Firefox?

  I am currently using Firefox 19. Last week, I found that, in the Yahoo and Gmail, I can't attach files using drag and drop; I used no drag and drop for a little while if I can't say that it began with a particular Firefox update. Unlike some FF16 users I have no problem dragging autour tabs in the browser. I know that in the past, certain issues with attachments were obviously related to the browser and so the reason why I consider that this link now. I use Windows XP SP3.

  Tylerdowner, hi.

  Thanks for your reply, but remembering the cause of a problem attach previous many Firefox users had at the time of FF13 related to implementation network.http.spdy.enabled to 'true' I decided to check again in this parameter: config.

  To solve my problem at the time I, like others, changed the setting SPDY of the "true" to "false", and what I found was not changed automatically with the latest versions of FF. I found, however, that there are now two other parameters SPDY v2 and v3, which were set to 'true '. In case they were in conflict with the first setting to "false", I changed this last to 'true' also. This is I went back to Gmail and tried to attach files, first under the normal procedure by clicking the attachments and selection of a file in the dialog box, which worked (previously on 'true' it had not worked); Second, I tried to fix with the help of drag / drop, now works. I also found that drag & drop in Yahoo also work.

  Thus, a conflict between the SPDY versions could have the cause of the problem when network.http.spdy.enabled has been set to 'false '?

  If the problem persists I'll let you know. (I've attached a snapshot of the current settings).

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Hello

  The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

  Then assign it to restricted users.

  Kind regards

  Bashar

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Abandoned Downlaods and support for Firefox 4.0 - 5.0. Why?

  Why Mozilla interrupted downloads and support for latest versions prior to 8.0? Imagine my surprise when 8.0 was automatically installed, and found out that not only the Google toolbar was disabled, but other plug-ins and extensions were more consistent. To restore my previous settings of the browser, I had to downgrade way back to 3.6.24 version - and then also had to find compatible themes prior to use! You people really know how to throw the users in free fall! I didn't even know there was a new version. And how can I disable the automatic updates?

  You can actually return to the 7.0.1 version (which I assume you had). I know many users who have done and is happier with Firefox 7. However, because Firefox 8 took care of some safety and security vulnerabilities, compared to its predecessor, they recommend to have later.

  Personally, I've been happier with Firefox 7 so, but I'm still using Firefox 8 so I can try to resolve some problems and to report. My main problem with Firefox 8 is that it is slower on many sites, including my Hotmail email.

  In any case, fear I digress from the subject, I compiled a list of old versions of Firefox official on this Review of Firefox web page allowing you to download Firefox 7.0.1.

• Cannot find the prototype of the function DeleteLinesFromFile and InsertlinesInFile

  Hello

  I want to remove or insert a line in a file. I want to use the function 'InsertlinesInFile' and 'DeleteLinesFromFile '. but I did not find the library to declare the prototype.

  Anyone know the library include what I need to use this function or other solutions to my problems.

  Thank you for your response.

  Stéphane SQUARE

  Hello Stéphane!

  Functions are from Server ActiveX LabWindows/CVI Interface: http://zone.ni.com/reference/en-XX/help/370051Y-01/cvi/usermanual/actxappdeletelinesfromfile/

  You can see the \activex\cvi\cvidemo.prj sample project to see how it is used.

  -Johannes

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.

• Windows Activation error: this version of the Windows Genuine Advantage validation tool is no longer supported. Please download the latest version and make sure that your system clock is accurate.

  Original title: Genuine Advantage error.

  Attempts to run Genuine Advantage so I can install photo pro tools Gets the error:
  "This version of the Windows Genuine Advantage validation tool is no longer supported.
  Please download the latest version and make sure that your system clock is accurate. »

  My system clock is accurate within 2 seconds of the atomic clock in Ft Collins.
  There is no update I can find for Genuine Advantage.

  I have a XP

  Please try USING INTERNET EXPLORER validation only - www.microsoft.com/genuine/validate

  What to validate for?

  what you're trying to download?

• my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  Hello dianeweeks,

  Thanks for the reply.  I have included a link below that I hope will help.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• computer to wake up from its sleep. Must reboot to regain the function keyboard and mouse

  Worked fine until yesterday.  There was a momentary failure earlier in the day.  Everything works fine until I put it sleep mode.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------------------------

  2nd use these:

  The problems of wake the computer from sleep mode
  http://support.Microsoft.com/kb/266283

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HH.exe crashes - lost connection to the online help and Support window

  HH.exe crashes - lost connection to the online help and Support window

  SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.

  "You have lost your connection using Windows and Support website. . Try to connect again. "
   

  Windows Error Reporting shows several times:

  1. HH.exe hangs and does communicate with Windows
  2. MsSearch TerminateProcess & #x000d
  3. ApphelpSoftBlock & x000d #.

  I have no problem connecting to Windows Web sites otherwise or to other sites on the web.

  Can someone tell me how to fix this?

  (I'm running VISTA 32 bit)

  Hello

   
  This behavior is caused by a corrupted or damaged HH. DAT file.
  
  This may occur if Antivirus or a firewall, you have installed the program it blocks.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• The Windows Help and Support window appears without reason

  original title: THE HELP AND SUPPORT WINDOWS

  How can I prevent the Windows Help and Support window popping up? My laptop came back from en Acer wh that the keyboard had to be replaced from this window opens at random. When I close it and pop back up again. This happens several times before it stops.

  Hello

  You can try methods below and check if it helps:

  Method 1:

  You can try to perform the clean boot and check if the problem still persists to see how to perform the clean boot, click the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 2:

  I also suggest you to run a scan antivirus online free from Microsoft Web site.

  one) to scan online for any virus threats

  Click: http://onecare.live.com/site/en-us/default.htm

  (b) click on "Security Scanner" and select "full analysis of the Service.

  You can download free antivirus Microsoft Microsoft Security Essential . Click on the link to download Microsoft security essentials: http://www.microsoft.com/security_essentials/

   

  Hope this helps,

• I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8

  I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8. I have a toshiba laptop, and there is no switch on the side of my computer what is expected? Help someone?

  Hello

  My older Toshiba has a power switch WiFi.

  My new Toshiba has a WiFi switch above the F keys, although I do not know which varies
  by model. So check with Toshiba support, their documentation online and drivers, and
  ask in their forums where there will be others with the same model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Drive cable HARD and support for M3800

  Hello

  I bought M3800 no internal HARD drive, but I want to add additional HARD disk now. Buy cable HDD and support for M3800 or can I use any other?

  Thank you

  Yes indeed.  I ordered the 21YWY of HARD-drive bracket and drive HARD interposer cable DG95V from Dell, to buy a battery from eBay 61WH (Dell has not tapped into it at the time...) and an EVO Samsung 1 TB SSD drive from Amazon.  It's easy to install (even if you need a very small torx scree 3 to remove the bottom cover) and works like a charm.