Five questions about OLAP makes me confused.

Similar Questions

• Question about to make an index

  I make a recipe book.  I want to do an index that lists all pages where appears the word "Apple".  The "classroom in a book" gives me the sickening impression that I'll have to go through all 350 pages and mark every time Apple appears in order to correctly enter in my index.  Y at - it a simple way so that InDesign can find all occurrences of 'Apple' (and 'Bean' and banana", etc.) without individually mark each occurrence?

  Thanks for your help.

  ccoburn3 wrote:

  ... I'll have to go through all 350 pages and mark every time Apple appears in order to correctly enter in my index.

  That is how a professional indexer would make the preliminary list. (And after this preliminary list, this hypothetical indexer runs through the list again and again, concatenation, fusion, deleting and moving items.) Otherwise it would be a simple word search list.)

  But apart from that:

  Y at - it a simple way so that InDesign can find all occurrences of 'Apple' (and 'Bean' and banana", etc.) without individually mark each occurrence?

  There is an 'Add all' button in the same dialog box that you use 'Add' a single entry. Guess what he does.

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Questions about student discount for CS6

  I know I want to get the premium Production CS6 from B & H, but just recently that I realized that my class of media production could possibly make me eligible for a discount for students. I have a few questions about get a student discount I've ever gotten before.

  My first question is: should I still pay the rest of the full price? Or, more important still, the student version will stop working after a period of time?

  My second and more important question is about installing on more than 1 PC. I am currently on my beast of a laptop. The iMac to my school with short CS6 smooth like butter, and it's spec lower than my laptop. Despite this, I plan to get a PC in the future office of Monster for my productions and I'm confused about my rights to installation with a copy of the student. I understand very well that I can't install it on the computer of another of Kathy; only on my own computer. He mentions (for teacher I guess) you will need to purchase additional licenses for installation on other computers. This means that when I buy a new computer, I need to buy a new license as well? Or I can use the one provided in the box?

  Any clarification on these questions would be appreciated. Thank you

  Your license does not expire and you never have to pay the price difference. You can install the suite on one type of computer, even if you have 2 activations. A series of PC does not work on Mac and vice versa. Only 2 PC installs will work or 2 Mac ones, respectively. The activations can be managed for in applications or by giving the customer a call to reset, if you their exhausted and forgot to turn it off.

  Mylenium

• A question about type

  Okay, at the risk of exposing me like a complete jerk, I need to ask a question about type.

  I use Fireworks CS4 to design a website of 40 to 50 pages. Most of the site is composed of ten stories, each taking two to five pages of the site. I use ghraphic and pictures to break up the grey type and illustrate the words. I anticipate using 14pt Arial for my policy. The text will be displayed on a 'unique' (that is to say, not repetitive) texture.

  I put on my pages with photos and other graphics, and I glued the type of original stories around the images. (I don't use Lorem ipsum for text space booked because I wanted an accurate measure of the screw-the-page notice words.) In other words, I wanted to be sure that everything fit and don't let no troublesome space at the end).

  I know that I do not export the type with images in Dreamweaver. I'll remove the text in Fireworks when I export, then paste it in Dreamweaver so that the pages appear as I have originally designed the.

  However, my question is this: If a reader opens one of my pages with his default computer to, say, 12pt Verdana, if it screws up the layout of my page? As I said above, I have designed the pages at Arial 14 pt. If the type will flip off my pages - or type will inches less on a page - if the Player browser is set to a different font size or point? If Yes, what can I do to make my pages (or contraction) to adjust the reader his reading preferences?

  Thanks again for your help. Of course happy that I do not use my real name on it.

  When you write the HTML code, you place the images next to the paragraphs they are associated if the police or the window changes size, then the whole of the document is redéroule, but logically, everything to its planned place. This can be frustrating for people who are used to define exactly where the images appear with respect to the text and even kerning and spacing to make a line "so." You will have awkward gaps somewhere, let it go... let the way you free from this concern.

  Everything is in a box, however. In this box, you can put images repetitive or expandable. So yes, you can put a background behind the text, no repetitive image on each of your pages and you should be able to set the box so that duplication of the background image will not appear if it is larger than the active area. (I think it would be in the CSS overflow divs property... you'd have to check).

  Here are some tutorials using broad, non-repetitive background images for the page. You could adapt the technique to a content div:

  http://Line25.com/tutorials/basic-Web-page-background-techniques-with-CSS (scroll down)

  http://www.WebDesignerWall.com/tutorials/how-to-CSS-large-background/

  On the other hand, however, lines of text that are more than 2 to 2.5 wide alphabets are difficult to analyze. If your site is intended to be text-heavy, you might be better off with a fixed width for your text box.

  I think that the comment the blogger relates using Fireworks Slicing page to export HTML code, which gives you a fixed design, based on a table. The HTML code, you can export FW is not for live sites. It's just for prototyping. It is better to use CSS for layout, rather than tables, because the code is easier to maintain. I came across this interesting tutorial (the author uses Photoshop, but any graphic program works if you want to follow along):

  http://NET.tutsplus.com/tutorials/HTML-CSS-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps.

  (I hope this helps you!)

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Question about temperature internal Satellite A300 ND1

  Hello

  I have a question about the temperature of the standards it of ok for my laptop and what is the normal temperature and how can I keep it low?

  Thank you.

  Hello

  It's not easy to say what a normal temperature could be.
  The temperature is not always the same and it depends on the use of the laptop.
  Usually, the temperature would increase while gaming or running applications high performance. Why? Because all devices such as the CPU and GPU would focus the heat dissipation and this leads to a higher temperature.

  > How can I keep it low
  Very simply, you can keep still low level, but you can make sure there is enough free space around the laptop to ensure good air circulation.
  Also don t use the laptop on your knees etc in order do not obstruct cooling fans.

  It s also advised to clean the fans from time to time using the jet of compressed air. These sprays are really useful and could buy in the stores of different computers.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Questions about Satellite P10 554

  Hello

  I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me.

  First of all:
  When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, but when it needs to turn off just reboot again. If I repeat the closing down directly after this restart, normally it turns off.
  This problem occur only when I use the power supply in battery mode.
  I can't say that to me...

  Second:
  I have a mini PCI Wlan card for my unit, works very well, but I wonder if it is possible to get the Wlan switch switch work whith it? Or is it only possible whith some special maps? It is not so important, but it would be nice to know if there is a trick or something to get the switch used.

  Best regards
  Gabbagandalf

  Hello

  Regarding your first question;
  I'm a bit confused of m are sure you n t use the restart option?
  I never noticed anything like that on my laptop

  Usually, if I use the Shut down option, I can choose between standby, hibernation, restart and shutdown. If I use the stop that the laptop turns off as it should.
  Maybe it's time to s for a reinstallation of the OS?

  On the second question.
  The switch on the left side for laptop was designed and developed to pass on the WLan card antenna.
  Usually, you should be able to use this switch and to toggle WLan card functionality

  Don t understand why it should not work?  :|

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.