Fixing a paper jam in the printer LaserJet 1020 range.

From time to time I see members post questions with paper jams that occur in the LaserJet printers single function. I found a video that goes through the steps of a paper jam on a printer LaserJet 1020 of compensation.

The video will cover the following steps:

  1. Transparent area of the print cartridge paper jam.
  2. Reset the printer.
  3. Reload the paper into the device.
  4. Adjust the print settings in the printer driver
  5. Clean the surfaces of the cartridge.

I hope the community finds it useful and informative. Good impression!

Tags: HP Printers

Similar Questions

  • Paper jam in the printer hp photosmart c4480

    Paper jam in the printer hp photosmart c4480

    How do you get the A6 envelope to remove it?

    Paper jam in the printer hp photosmart c4480

    How do you get the A6 envelope to remove it?

    ========================================
    The following items may be worth a visit:

    HP Photosmart C4480 all-in-One Printer Troubleshooting
    Jams & feed problems
    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=46315&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3418705

    Jam paper with HP Photosmart C4480 all-in-one. ?
    http://answers.Yahoo.com/question/index?QID=20090409194542AAZIhWS

  • Paper jam in the printer HP Deskjet 3520 e-All-in-One (model SNPRH-1102)

    I had been using HP Deskjet 3520 e-all-in-one printer over a year until yesterday the printer suddenly jammed paper. I have some ideas out of A4 paper to let the printer works normally again. I need printer for printing currently. Please help, anyone here.

    Hi Lsyj,

    I can help you with the paper jam, you have experience. I found the following document that will guide you through the steps needed to solve the problem; A "Paper jam" message on the control panel.

    I hope this helps.

  • transport paper jam in the printer

    How can I pay for carriage jam in my HP printer {removed privacy} 6310xi. I triied every step of troubleshooting according to the tune

    There is a document with steps to help solve a problem of paper jam carriage in a 6310xi. The document can be accessed here.

    If the steps in the document does not erase the question, the next step will be to replace the printer as a hardware problem has developed. I hope this helps.

  • printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

    Hello

    was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

    Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

    But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

    Thanks Mike

    Hello

    I understand that you can not print with Win 8.1.

    Drivers for win 8 and 8.1 Win are the two Version 9.
    Make sure that you uninstall the previous printer software.

    Here is a url to completely uninstall a printer in Win8.
    http://www.YouTube.com/watch?v=-M0GVVcwT-o

    Restart the computer.

    Reinstall the software of the printer again. Select full features software driver.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

    If you need more simply make assistance let me know.

  • How can I clear the paper jam in my printer

    Original title: Deskjet printer

    How can I clear the paper jam in my printer?

    Hello Janet,.

    Let me ask you;

    • What is the brand and model of the printer?
    • Do you have the manual of the printer with you?

    The following factors can cause paper jams:

    1. paper loaded properly in the paper tray.

    2 rolls of paper damaged or dirty.

    3. torn, crumpled or wet paper loaded in the paper tray.

    4. the access door back or double-sided (duplexer) printing accessory cannot be closed or is not locked in place.

    5 paper was added to a stack already in the status bar.
    The status bar contained more than one type of paper.

    6. torn pieces of paper from a previous jam are stuck in the product.

    7. the status bar is too full.

    8. If printing on an envelope, the envelope edges are bent.

    To avoid damage to the printer, see the documentation that came with the printer to see how to remove paper jams. Function of the printer, and where the problem is occurring, you might want to try one of the following options:

    • Go to the printer, the arrival of mail in the State or the display on the printer area that might tell you where the problem occurred, and then complete steps provided to remove the paper jam. If the printer does not display an information about the problem, check the information that came with the printer. If the printer is connected to a network domain, contact a system administrator or your company support desk.

    • Some printers offer a button that you can press on and hold, or paper feed another option that you can use to try to get the paper without damaging the printer.

    • You may need to open the printer casing and remove the paper that is the cause of the problem. Before do you, check the documentation that came with the printer to see if you put off the printer or take other measures to prevent injury to yourself or damage to the printer.

      You should also check if the printer box opening will result in the invalidity of the guarantee or any agreement to repair that you bought or supplied with the printer. For more information on the agreements, check the detail information and manufacturer supplied with the printer.

    If the problem persists, use the printer to help manual or contact the manufacturer of the printer to help.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

    How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

    Hi baldwinj,

    Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

    HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

    Download drivers and software

  • Got paper stuck in the printer and now will only print proofs. How to reset the printer

    Got paper stuck in the printer and now will only print proofs. How to reset the printer

    It looks like you may have some saved jobs in your queue that need to be removed.

    Here's how:

    To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
       
    You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
          
    To stop the Print Spooler Service, click Start, run and enter in the box:
           
    services.msc
           
    Click OK to open the Services Applet.
           
    Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
       
    The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
       
    If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

    Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
       
    Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
       
    Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
       
    C:\WINDOWS\system32\spool\PRINTERS
           
    Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
           
    Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
       
    After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

    Submit new failure of print jobs.

  • SE error message: there is a carriage jam and the printer will not printusing HP PSC 2355xi printer all in one

    Original title: transport jam

    Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

    It is a hardware problem, not a Windows problem. You should contact HP for assistance.  This may mean that the engine or the running gear is toast. They should be able to tell you which components to check.

    writing in the new message: * e-mail address is removed from the privacy... *

    Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

  • trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

    I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

    When you try to remove the drivers under properties of the print server, I get the following message:

    "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
    Impossible to remove the hplj1020.inf package. Access is denied. »

    someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

    How can I remove the drivers?

    Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

  • "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

    I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

    This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

    I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

    Babe thank you... todius

  • HP Laserjet CM6040MFP always paper jam on the fuser unit when full photo in plain paper printing

    Hello

    My office using printer HP Laserjet CM6040MFP, but I have the problem.

    The printer paper always jams on the fuser unit when full photo in plain paper printing. I didn't know why, but this problem occurs on another printer of the same type.

    Please help me

    -Product name: HP Laserjet CM6040MFP Q3938A

    -Operating system: Windows 7 64-bit

    Kind regards

    Milannerz

    Hello again-

    I am pleased to learn that the passage is a practical solution for you.

    The other possible solution which seemed to be a finding a setting under print quality-> Optimize-> light Media and put on IT.

    I don't have a CM6040MFP to check this setting, but it's just an alternative to consider.

    Personally I have found that a high coverage near the leading edge of the media, some printers can sometimes cause an increased rate of jam.  So I think that your shift is a viable solution.

    Good luck!

  • Paper jam false error HP LaserJet Pro P1102w printer

    Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

    I would be grateful for any help

    Thank you

    Ron Barker

    Hi @RonBarker ,

    I see that you have problems printing of envelopes. I will definitely do my best to help you.

    The Word software, to change the auto power.

    When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

    In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • As if paper jams in the two sided printing mode

    HP Officejet Pro 8500 has Premium

    Windows 7 64 bit

    Paper jam

    When I try to copy or fax from the document feeder, the document tries to recharge as in print mode both sides, however, only mode is selected. When the paper is trying to load a paper jam message is generated and pray a reloading of the document.

    I'm sorry that you are having this problem with the printer. Here is a document that deals with paper jams when you use the ADF on the printer. It will provide troubleshooting steps to try to solve the problem. I hope this helps. http://goo.GL/MXWnM

  • How can I clear the paper jam in the HP OFFICEJET 4500 printer?

    The jam occurred when printing on plain, white legal paper (8.5 x 14) and the landscape orientation.

    There are a number of the OfficeJet 4500 series printers. If you have the HP OfficeJet 4500 G510g then here are the relevant support pages:

    HP OfficeJet 4500 G510g - jams & feed problems .

    If you have a different printer access the equivalent page for her.

Maybe you are looking for