Fixing of the layers at the sides of the other layers

Similar Questions

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Conflicts between FF 37.0.2 and the Greasemonkey add-on extension disables certain built-in functions of Netflix. Is a fix in the works?

  After seeing that mouseover Netflix video descriptions were does more after the FF 37.0.2 update, I was able to isolate the problem (thanks to a suggestion by jscher2000 here: https://support.mozilla.org/questions/1059050 ). Even if my installed userscripts were functioning normally, have Greasemonkey enabled in FF 37.0.2 disabled built-in Netflix mouseover descriptions. Before the update, everything was fine. This issue is not present in Chrome or IE.

  Deactivation of Greasemonkey solved my problem of Netflix - but then all my userscripts are useless. I rely on Greasemonkey to enhance and customize my web experience. I can only assume some other issues posted the Mozilla Support that 37.0.2 creates problems with a number of modules and extensions. Is there a fix in the works, or should I downgrade to an earlier version of FF?

  The changes from 37.0.1 to 37.0.2 are pretty minor (Release Notes), but some changes are related to compatibility with card/chipset graphic driver software, which could affect the display of overlapping information. Since the display works normally when Greasemonkey is disabled, I don't think it's likely to be the problem.

  I suggest the reactivation of Greasemonkey and investigate scripts.

  While on Netflix, click on the small triangle of drop down next to the monkey button in the toolbar and look for the check marks indicating that a particular script is running on the page. Try to turn off scripts to see if you can follow the show down to an individual. I think you should reload the page between changes.

  Can you trace the problem to any particular script?

• My office is half divided. One opaque side and the other clear help

  My Mac Mini desktop computer has suddenly split into two halves. One opaque side and the other clear help as if half of the screen is selected

  I just realized that control of the mission, the launching ramp and dashboard do not work (I can't call them upward)

• OfficeJet 8610: OfficeJet 8610 when you copy in duplex, one side to the other side

  When I try to copy multi-page documents, goes to 1 side 2 sides, one side is upside down. This works when the pages are in portrait setup but not when they are in the configuration of the landscape.

  It's COPY, not print, so I can't follow the advice to replace the flip setting. There seems not to be a setting on the printer itself to change that.

  I did a chat session with HP, but the problem was not resolved. I got a call a supervisor (level 2, no doubt), but I have not worked with them again.

  The printer is connected wireless. I run the installation wizard and the Finder solution and the update as well as the doctor of printing and scanning without result.

  Any ideas?

  Hi @Tiggy626A,

  I see you are having problems copying 2 sides in landscape mode. I will definitely do my best to help you.

  From the front panel of the printer, you can bind only on the long side, there is no option to change the copy to the short edge. I tried to copy 2 faces on our Officejet 8610 laboratory, one side released head downstairs. By experimenting, I found a solution, by loading the two documents to copy in the ADF file, load the other down. This will allow the copy two facing the landscape properly the printer. I know that's not very practical, but it worked out this way.

  This feature is available if you choose to scan documents and then print as a 2-sided document with a link on the edge short.

  Here is a document for the HP Officejet Pro printers 8610 - copying Documents.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• Satellite L670 - is there a fix for the keyboard?

  I have a L670 laptop, the keyboard is defective. I already checked the other threads about this problem and apparently it's a fault in the world with this laptop. Keyboard is bad and also reiterates random letters. I know that BIOS update works for a week or two, then the problem happens again, is not the battery. Others have mentioned it is probably a mistake to motherboard but even after returning from the laptop for repairs, they mention that it is still not fixed.

  So my question is: is this laptop completely drunk or can it be fixed?

  I don't want to get a new one only to meet with exactly the same problem because it seems that each L670 has this fault (by the way, this message took over 15 minutes to type when it should only have me 2mins).

  Who can help me and what have said about the Toshiba?

  Haver you contacted for Service of toshiba in your country to ask what is the problem?

  (> y the way, this message took 15 minutes to type when it should only have me 2mins).

  It's really crazy :(

  > I don't want to get a new only faced with exactly the same problem, because it seems every L670

  What happens if replace you other model Toshiba?

• I already sent my phone to apple service center I am able to ask the service center to fix at the service of my phone that I would not be able to collect my phone on the estimated time

  I already sent my phone to apple service center I am able to ask the service center to fix at the service of my phone that I would not be able to collect my phone on the estimated time

  I guess you can always contact them using the contact information they provided and ask them.  If they can you host or not is not something that anyone here can say.

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• My doubt is if I press a button, it will redirect you to the other side...

  For a single application I need if I press a button, it will redirect you to the other side, how it is possible in LABVIEW

  Thank you.

  Place your Subvi inside your main diagram of vi.  Use a Structure of the event to capture the key event.

  more information here:

  http://forums.NI.com/T5/LabVIEW/how-to-open-a-subVI-on-a-click-of-a-button/TD-p/1082660

• Police in width fixed in the control chain

  I do it an alignment in the text control and that you want to use "fixed point" or are monospaced, Consolas.

  Font Consolas is very basic fonts in all windows and Notepad and shows the "zero (0)" as you can see the attachment.

  I placed the police for control of the chain, chain control the other police shows that property node has revealed the information provided.

  (I notice that police Labview dialog box shows the correct information.)

  My problem is that police, Consolas, find the Notepad and Windows, but cannot display it correctly on the control of the chain.

  Can you help me how I can check this problem?

  Attachment: comparison of each program.

  labmaster.

  *) Other default Korean font indicates fixed width in the strong control as an attachment.

  Hi labmaster,.

  The notebook uses Consolas by default, too.

  Courier looks like this:

  

• Does my computer have a microphone? my friends on the other side cannot hear me on Skype.

  Friends on the other side are unable to hear what I say about Skype. Image is pulled over the two screens and I can hear them clearly, but they can not hear a word of what I am saying. This computer has a built-in microphone? Help, please.

  Hello

  Unfortunately, we do not know what kind of computer you have.

  Except that your best resource on it would be the company that built.

  Best regards

  Matthew_Ha

• If someone phones and say u computer year is full of virus and says he can fix at the top of the computer it is scam

  someone who says that they r windows phone and computer of the year is seriously infected and he can fix at the top of the computer if you follow his instructions are this type of scam

  Yes, it is a common scam.

  Do not give them information, do not give them access to your PC and do not go to all the websites that they suggest. One moment. See:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html