Flags of HP g6-2235us: bluetooth

Similar Questions

• Bluetooth is not working properly on Tecra M9

  I have a problem, try to use my Bluetooth on Toshiba Tecra
  Laptop of M9.
  When I go into the Panel "Bluetooth devices" does not appear on the list. The only reference to Bluetooth is "Bluetooth Com".

  If I double click on the Bluetooth in the Systray icon, I can't open a Bluetooth device. I get a warning flag saying "Bluetooth is not ready."

  The problem is that I can not turn 'on' bluetooth on your laptop (even after you enable the wireless switch on the front of the laptop).

  The "Bluetooth devices" icon in the control panel is missing.

  All ideas
  Thanks in advance...

  Install the battery last Bluetooth and start "Bluetooth settings" of the folder program "Toshiba-> Bluetooth.

• To automatically reconnect Bluetooth

  Hi, I have a vi that connects to a Bluetooth transceiver and collects and plots / stores incoming data. The connection is initiated by the user on the front panel.  However, sometimes LabVIEW gives me a connection error, sometimes it's once an hour, sometimes it's once every 24 hours, and I have to manually start the connection.  I was wondering if there is a way to design a vi that is always looking for a connection, so if the connection is lost it reconnects automatically.  I see that there is no sample Bluetooth screws that come with LabVIEW (2010), would one of these work?

  Hi baseball07,

  The example of "Advanced Blueooth Server.vi" (go to help > examples > Search bluetooth and it should appear in the list) should be a good place to start. It shows how to connect to several headphones at the same time, using the listener to create function.

  Thus, it shows how to use the Bluetooth to waiting on the listener function. In this example, VI, if you catch an error Connection Timed Out or connection closed, you stop the loop and close. You can change this so that if you receive this error message create you a flag to show that a shift has occurred, but rather to stop, continue the loop outside while Cook waiting for Bluetooth on the State of the listener. As long the device he always tries to connect, you should be able to reconnect automatically on the bluetooth device.

  I hope this helps!

• Problem bluetooth Windows 10

  Hello!

  I have a lovely little Aspire V5-17 t.

  I recently booked my copy of Windows 10 and the little app that checks compatibility Windows 10 threw up several flags autour bluetooth in Aspire.

  He specified the following as not compatible:

  Bluetooth Audio device

  Bluetooth AVRCP Qualcomm Atheros device

  Supported virtual Bluetooth (including Audio)

  Device Bluetooth de LWFLT (also Qualcomm)

  Bluetooth hardcopy cable replacement server (also Qualcomm).

  Acer is aware of this problem? Will there be updates of pilot released before July 29 (release date for Windows 10)?

  Thank you

  Sarah.

  Thanks Billsey. According to the guidelines of my original post, the application Microsoft Windows 10 said that the laptop was Windows 10 ready except the bluetooth.

  I updated the laptop for Windows 10 last week.

  Interestingly, he installed a Microsoft driver for bluetooth.

  The hardware only problem I encountered was with the touchpad. Reinstalled Windows 8 drivers for the touchpad momentum and that fixes the problem.

  Thanks for all the answers.

• No wifi, Internet or bluetooth

  I'm running a 3520 Inspiron with windows 7 Home premium. I stopped it and when I re started it I have no wifi or Bluetooth. I tried hard wiring for the modem and still nothing. I went to the Device Manager and there is a yellow flag next to Dell Wireless 1703. 802.11b/g/n (2,4 GHz). When I right click on it I get this message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is incorrect or damaged, or maybe it's a malicious software from an unknown source. (code 52) I have not added or changed anything. What is the problem and what can you do about it? Thank you very much

  Hello

  Lioness7228

  I'm running a 3520 Inspiron with windows 7 Home premium. I stopped it and when I re started it I have no wifi or Bluetooth. I tried hard wiring for the modem and still nothing. I went to the Device Manager and there is a yellow flag next to Dell Wireless 1703. 802.11b/g/n (2,4 GHz). When I right click on it I get this message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is incorrect or damaged, or maybe it's a malicious software from an unknown source. (code 52) I have not added or changed anything. What is the problem and what can you do about it? Thank you very much

  ! If reinstalling the drivers did not work, you can also try to restart to fix options by pressing f8 at startup until... on repair option, choose allow not digitally signed drivers, then continue to boot. If still nothing works, go to Device Manager, uninstall the drivers with the yellow flag. turn off your wifi by pressing fn + f2 key. Then turn it back on by pressing the same keys again. On the upper part of the page in the Device Manager, click the action tab, and select check for material changes...

• Bluetooth programming

  Phone: 8110 v4.5.0.182 running

  Development: Eclipse with 4.5 component package

  I have worked on this problem on and off power for several months now and have scoured the forums and on the web for a solution. What I'm trying to do should be very simple: search all Bluetooth devices within range and their return address. I tried a variety of approaches with DiscoveryAgent and DiscoveryListener using multithreading, locks, waiting etc and nothing seems to work fully. Currently, I am working with the following block of code:

          synchronized (finder)
          {
             // Indicate that we are scanning.
             finder.searchFlag = true;
  
             try
             {
                // Initiate a device search
                 dAgent.startInquiry(DiscoveryAgent.GIAC, finder);
                // Loop until the device discovery finishes.
                while (finder.searchFlag)
                {
                   try
                   {
                      finder.wait();
                   }
                   catch (InterruptedException e) { }
                }
             }
             catch (BluetoothStateException e) { }
          }
  

  Extinguishing is the DiscoveryAgent for my local device and finder is an instantiation of the following class:

  public class TagFinder implements DiscoveryListener{
  
     Vector tags = new Vector();   //Flag to indicate searching  boolean searchFlag;
  
    // Return list discovered tags    public Vector getTags() {     return tags;  }
  
     // Called whenever a device is found  public void deviceDiscovered(RemoteDevice btDevice, DeviceClass cod) {        if (!tags.contains(btDevice)) {           Dialog.alert("Device Found");         tags.addElement(btDevice);        } }
  
    public void inquiryCompleted(int discType) {               searchFlag = false;               Dialog.alert("Inquiry Completed");               // Wake up                  notifyAll();    } 
  
    public void serviceSearchCompleted(int transID, int respCode) {   }
  
    public void servicesDiscovered(int transID, ServiceRecord[] servRecord) { }}
  

  When I run this code, the phone crashes and are never called deviceDiscovered and inquiryCompleted. I confirmed by debugging on the phone with breakpoints as well as with the alerts shown. When the console debug returns the results of the survey of BT as well as the final message of BT investigation is completed, but for some reason, the methods are ever called and my phone is stuck waiting to finder.wait ().

  Any help would be greatly appreciated, it held me for a long time and I've exhausted all the resources at hand. I tried the software on several computers and several phones.

  Thank you

  Luke

  is it possible you that you block the EventThread?

  The code seems fine for me and JSR82 always worked well for me on BlackBerry

• Wire bachground for Bluetooth Serial Port Communication

  Hello

  I want to make a request which should be as a background thread to run after that BB has been activated.

  I tried something:

  1. I used BluetoothSerialPortListener and as a normal application. After I chose the menuitem, it begins to listen to the bluetooth serial port. When the data are arrived through the port, it extracts the data and write a response to the sender. Then he out the value and display it on the screen, where I used an object of class screen. But, after posting a value, it cannot display the value came second. I tried, what the old screen pop fist, then puschup the new screen. But it does not work. How can do it, when the new value, they can be diaplayed on the screen?

  2. then I did the BluetoothSerialPortListener in thread and used the autostart flag such as:

  Public Shared Sub main (String [] args)
  {
  If (args! = null & args.length > 0)
  {
  if(args[0].) Equals ("autostartup"))
  {
  Starting the device we want to start the thread SycareBluetoothPortListener
               
  sycare_synergy ss = new sycare_synergy();
  }
  }

  This time around the Listner should take only data is arrived and then sends a response to the sender. But after downloading, BB has always shown that he was unable to generate a new object of the thread class and the thread could not be started.

  Someone tell me, how can I fix it and make it possible, that after each new start of the BB, the bluetooth serial port can always in the background arrivals data receive and display automated according the data arrived?

  Thank you in advanced and Merry chiristmas!

  Monternet

  1. update the user interface.

  It is possible that you are trying to do.  In fact, you don't need to replace the screen, you should be able to simply update a field on the current display of data.  As an example of a background thread to update the user interface, please see the code of httpdemo.

  2. Thread context

  When you say things like:

  "that he could not generate a new object of the thread class.

  It would be much better if you can cite exactly what makes the Blackberry.  In this case, I assume that it has generated an Exception, so the Exception and the associated detailed message that Exception must be included when you report a problem like this.

  In any case, it is possible to implement a background task in the way you need.  Search the Knowlegebase for articles that talk about background Applications and display updates to the user interface of the task in the background and auto-start applications.  There are a few pieces of confusion to this process, so there are a few to get your head around, but I think that everything is in the articles.

• Smartphones from blackBerry Bold 9900 - can't see any earpiece/headset bluetooth

  Hello

  I'm having a problem with my new "BOLD".

  I can not pair it with a bluetooth headset, specifically, is not detect any bluetooth headset (I tried with 3 different models).

  I don't know that Bluetooth works because I can connect the device to my PC.

  I've tried everything, I put in pairing mode so headphones listening and the device but still nothing.

  I tried 'listen' mode and 'search' mode and yet nothing works.

  someone has an idea of what it could be? At this point, I think of a hardware problem, could it be?

  This may seem a minor issue for someone, but I'm often driving while talking on the phone, cannot do without this option.

  Help would be appreciated!

  Thank you guys!

  Problem solved.

  go to the bluetooth options and remove the flag of encryption and transfer address book.

  in this way, it worked for me and could see the devices.

  Also, make sure that you are using with your bluetooth pairing headset.

• Bluetooth, causing the blue screen with error message: out of State driver

  Hello

  I am posting this in the other thread here but it was closed before I could solve the problem.
  Background:
  I left on vacation for 4 weeks and I left my computer.  When I came back, my computer was giving me the following problems:
  • Video playback of my SIN was rough and freezing - I fixed that by finding out one of the drives died on RAID-1
  • After 30 minutes, the computer would give me a Blue Screen of Death (BSOD) and reboot - I have updated every driver I could, each piece of software, update the BIOS and then finally solved the problem by updating the firmware on my boot drive: a Crucial 128 GB SSD m4

  These two problems have been resolved, but can be useful to understand the current problem

  Current problem:
  After trying to use the webcam for video chat via Gtalk or Skype, my Bluetooth Logitech MX5500 keyboard and mouse stop responding.  About 10-15 minutes after the call is completed, my computer gives a Blue Screen of Death with the message of STATE FAILURE of PILOT.
  The minidump file is available here, and I understand that the cause is due to my Bluetooth driver: http://dl.dropbox.com/u/30633232/052212-24429-01.dmp
  What I tried:
  • I've updated all the drivers available on the Asus site for my motherboard Asus P8P67 EVO, including Bluetooth and the BIOS driver
  • I've updated my HD Audio integrated system with the drivers available on the Web from Realtek site
  • I've updated all my drivers webcam and Logitech software
  • I uninstalled, restart and reinstalled my Bluetooth drivers
  • I have not matched and repaired my Logitech MX5500 keyboard and mouse
  • I uninstalled, restart and reinstalled both Skype and Gtalk for Chrome, Firefox and Internet Explorer plugin
  The ask:
  I'm out of ideas... would like to get the genius of someone on these boards help me please!

  The problem may be with the c:\windows\system32\drivers\sptd.sys:

  ******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa8009d73060, physical device from the stack object
  Arg3: fffff80004c093d8, functional device object of the stack
  Arg4: fffffa800e0c3190, blocked IRP

  Debugging information:
  ------------------

  DRVPOWERSTATE_SUBCODE: 3

  Nom_image: usbhub.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d8c0c15

  MODULE_NAME: usbhub

  FAULTING_MODULE: fffff88008c06000 usbhub

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  STACK_TEXT:
  "fffff800'04 c 09388 fffff800'03502702: 00000000' 00000000'00000003 fffffa80 ' 09 0000009f d 73060 fffff800 ' 04c093d8: nt! KeBugCheckEx
  "fffff800 ' 04 c 09390 fffff800 ' 034a2e4c: fffff800 '04c094c0 fffff800' 04c094c0 00000000'00000000 00000000'00000003: nt! : FNODOBFM: 'chain' + 0 x 34050
  "fffff800 ' 04 c 09430 fffff800 ' 034a2ce6: fffffa80 '06cdf5b0 00000000'01642618 00000000'00000000 fffffa80' 097aa901: nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '04c094a0 fffff800' 034a2bce: 0000034f 'c591e29e fffff800' 04c09b18 00000000'01642618 fffff800'0360 d 588: nt! KiProcessExpiredTimerList + 0xc6
  "fffff800 '04c09af0 fffff800' 034a29b7: 0000011a ' 68920ac3 ' 01642618 0000011 0000011a has ' 68920 has 32 00000000'00000018: nt! KiTimerExpiration + 0x1be
  fffff800 '04c09b90 fffff800' 0348feca: fffff800 '0360ae80 fffff800' 03618cc0 00000000'00000002 fffff880' 00000000: nt! KiRetireDpcList + 0 x 277
  fffff800'04c09c40 00000000' 00000000: fffff800 ' 04c0a000 fffff800'04 c 04000 fffff800 ' 04c09c00 00000000' 00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

  BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

  Follow-up: MachineOwner
  ---------

  0: kd >! devobj fffffa8009d73060
  Object Device (fffffa8009d73060) is:
  Can not read information from nt shift! ObpInfoMaskToOffset
  \Driver\usbhub DriverObject fffffa80094ffa50
  Current PRI 00000000 RefCount 2 Type 00000022 Flags 00003040
  DevExt fffffa8009d731b0 DevObjExt fffffa8009d73bb0 DevNode fffffa8009d7b550
  ExtensionFlags (0 x 00000800)
  Unknown flags 0 x 00000800
  AttachedDevice (top) fffffa8009663880 * WARNING: unable to verify timestamp for c:\windows\system32\drivers\sptd.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
  \Driver\ACPI
  Queue is not busy.

  I would say to uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it is Daemon Tools or Alcohol 120%.

  Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

  http://www.duplexsecure.com/en/FAQ

  Similar question in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/the-computer-has-rebooted-from-a-bugcheck-the/2a0b354e-4FEA-4349-b88f-eb4b10199380

• Cisco IP Communicator with Bluetooth headset has fast battery drain

  Hi all, hoping to exploit the collective knowledge here to find an answer to a question that we live with bluetooth headsets with quickly draining the battery.

  Environment: We run Cisco UCM 10.5 and have some users with Cisco IP Communicator 8.6.4.  Computers are a mixture of office/computer laptop with Windows 7 32/64 - bit.  Most are bluetooth headsets, Plantronics Voyager legend UC with some older models of Plantronics.  These use a bluetooth dongle separated with flag State.  This helmet is announced as having 7 hours of talk time and 10 days standby.  Plantronics software is set to Audio enabled detection and headphones to maintain for PC connection as it is disabled.

  Behaviour: Normally, when the bluetooth headset is not in use, the light blue and the helmet is considered as standby.  When a call, the indicator light is a slow blink showing the helmet is in active use.

  Question: When not in a call, or when the CPIC is even launched, the indicator light is a blue blicking and users can hear 'air' in the helmet, even when not off the hook.  This led the helmet to be in Active mode and thus draining the battery at a higher rate.  Even if option software Plantronics headphones maintain link PC is off, it acts as if it was.  The only way that we were able to work around this problem is in the Plantronics software to disable Audio detection enabled.  This leads to the user needing to press the answer on the headset button and the answer button on the software phone which isn't ideal if users are up and on.

  So having said all this, is there a resolution to allow the headset to use with CPIC without the helmet being still active?

  It comes to video over IP, please move to the appropriate area.

• Programatically pair Bluetooth and disable pairing

  Hello

  I use the functions BluetoothFindFirstRadio / BluetoothFindNextRadio functions to discover Bluetooth devices on your desktop Windows 8

  with a BT dongle.

  I am able to discover devices. But once a BT device is discovered and combined. When I try to search for new devices of the former partner

  device is displayed. But this unit is turned off and I don't want to find out if its switched off the coast.

  Is there a way NOT to discover OFF switching devices (even if they are matched in the Device Manager)?

  Is there any specific flag must be set for this? I tried the code of the 3rd party like 32.NET. But here too, I'm the same way.

  Help, please

  Concerning

  Rambeau

  Hi Raghu,

  Thank you for your message.

  As you use C++ functions to programatically pair Bluetooth and turn off pairing Bluetooth, your application would be better suited in the MSDN forum.  I suggest you post your query in the MSDN forum.
  http://social.msdn.Microsoft.com/forums/en-us/home

  Thank you.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Headset Bluetooth Plantronics travel legend not seen by iPhone 7

  It worked fine with the iPhone 5 s. No device sees the other.

  Hello

  Could be something in the instructions that will help here > Set install and use third-party Bluetooth - Apple Support Accessories

• Since activation apple CarPlay, my iPhone does not connect to my Bluetooth infotainment system

  I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?

  Hi biker.

  I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.

  Please use the Apple Support communities to post your question. Good day.