To automatically reconnect Bluetooth

Similar Questions

• Automatic reconnection to a bluetooth device

  Hello

  I have a bluetooth device that communicates using port virtual com. When I reset the unit it disconnects - obviously. However, when the device is live * not reconnect.* I couldn't find an AutoFix * battery Toshiba Bluetooth for Windows v5.10.14FP1 * who * to automatically reconnect the device *. Is there a way?

  Open "Settings Bluetooth" by a double-click on the Bluetooth system tray icon.
  Select "Bluetooth-> Options...-> other-> COM Auto Connect settings-> activate the COM port required to reconnect."

• Automatic Reconnect connect MS SQL Sever

  Ladies and gentlemen,

  Please help me on how I can make the automatic reconnect the connection to the SQL Server after losing.

  Now the connection to the DB 'open', I did both before 'loop' and I don't want to put in "loop" to allow the consumption of memory of growth

  We have been the closing and opening a connection every time and we decided to change because the virtual memory increases considerably. So, we opened the connection before all by inserting a case within the sentence that detects an error in the communication, and if this is the case resume communication.

• AnyConnect + timeout during automatic reconnection

  Hello

  I have configured AnyConnect with network Trust detection and automatic reconnection.

  I have a problem with this use case:

  1. Users connect to AnyConnect with certificate
  2. When the 3G network is no longer available, AnyConnect tries to auto-reconnect
  3. After 30 minutes without network connectivity, users have this alert "your connection to the secure gateway has been suspended longer than the time limit. A new connection is necessary, which requires re-authentication.

  4. If the 3G network is available, TND detects that the network is not approved and connects automatically.

  The message in step 3 is unnecessary and users think they must connect manually. How can I remove this alert?

  I tried to put the "idle time-out" unlimited in group policy, but it doesn't change anything.

  Thanks for your support,

  Patrick

  Idle time-out is the correct setting. Two things could've gone wrong. You don't want not unlimited because without a maximum connection time, which means ghosts sessions would not be cleaned up. I propose a framework of 12-24 hours.  If it still does not respond, you applied probably this to the wrong group.

• Automatic reconnection Plantronics 855 Bluetooth Pre

  I'm having some trouble ensuring that the Plantronics 855 receives a signal from the Pre. Similar to the questions in my Acura TL hands free system. I find myself having to disable bluetooth on the Meadow, and then reactivating to operate. Also, sometimes I will need to turn off the 855 and then turn it back on as well. Have only had it for 2 weeks, so I did not yet understand the trend, but the marriage of pre and BT does seem to not yet be happy.

  Anyone else have similar problems and / or answers to why this could happen?

  Update: my pre was replaced because of the Oreo effect.  This solved all my problems BT with the 855 Plantronics, as with my Acura TL hands free system (except the end key on my wheel by placing the call on hold rather than hang up)!  Must have been a HW question with the original pre or associated firmware version.

  .. .unexpected advantage.

• Automatically connect BlueTooth mouse

  Hello world. Let me explain my scenario:
  Satellite M60 (built-in BT)
  Trust optical mouse BT
  I have NOT installed the drivers of trust. I first tried to use embeded than BT. everything goes very well.
  The BT Manager recognizes mouse trust (generic HID device).
  I have her PIN number so I managed to connect.
  Only one problem: after some time of inactivity or after a restart the HID device is still there, but it doesn't automatically connect.
  Only after having forced the conection in settings of BT (after clicking the connection button on the mouse), it works again.
  Another note: other BT device, I've implemented (my laptop) as a specific option: automatic connection (power). No similar option in the details of BT for my mouse device.
  Any clue?

  Hello Andrea

  Sorry, but it is not easy to give you an answer to your question. In my view this forum isn't right place for it. You use no product Toshiba and in my opinion you should check the support site of confidence on http://www.trust.com/service/login.aspx?link=/service/service.aspx?

  The fact is that BT USB stick works and there is no problem with the USB port on the unit of Toshiba. It is not easy to say why there is no automatic link between the USB BT's key and mouse. I can't recommend this:

  -Start Device Manager and go to the properties of the USB
  -for each USB root HUB, go to properties and the power management tab
  -remove the check mark from the option allow the computer.

  I put t know if this can help, but you can try it.

  Good bye

• HP Officejet Pro 8600 wireless to automatically reconnect after router turned back?

  I have the printer connected wireless have pick up the IP of the router configuration.

  Whenever the router is turned off and turned on, the printer loses the configuration of the wireless network and I must choose the wireless network and re-enter the password.

  It seems to be all right with the wired Ethernet network which I use at the moment.

  What could I have done wrong to the wireless configuration?

  I guess that the printer cannot get the IP address of the DHCP server on the router after reset of the power.  So I try give it a static IP address.  I don't seem to be able to set a static IP address for configuring wireless on the printer either.

  More important still, why he forgets the address assigned in the first place?  I wouild wait there a memory possible to memorize some basic such as the network settings.

  Hello

  If the printer near the router, be sure to continue, it closes, but not less than 2 meters... which should greatly improve stability wireless.

  Once the router restarts the printer not restores to it once it is inactive.

  you have to turn the printer off and then on once the router is completely upward once again, it should reconnect to your network.

  Please let me know if any of the steps above allows.

  Shlomi

• Automatic reconnection VPN Client

  We have a PIX 515E and we have just implemented a few remote users. Everything has been working well, except that users have unreliable connections that often fall. When their ISP connection drops, they connect in the VPN client again. Is it possible to configure the clients to automatically connect to the VPN when a connection is present, similar in the manner of that site to site VPN works transparently for the user?

  We currently use the client 4.6 and are open to try other methods of remote users connect to the PIX (PPTP, etc.)

  The VPn client has an auto-initie function, in that when he sees the traffic to a specific destination, it will bring up the tunnel. If you allow users to save their passwords, then the whole process can be transparent.

  See http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/4_6/admin/vcach4.htm for more details.

• Automatic reconnection to conference settings

  TMS 15.0.1

  Conductor X3.0.3

  Telepresence Server 4.1

  When there are problems connecting with the bridge seems to be advised to the communicating endpoints back a number of times at a defined interval.

  Is it possible that I can handle this setting?

  This type of functionality is something that TMS verifies, within TMS under administrative tools > Configuration > settings Conference > Conference connection.  Your TMS can be configured to reconnect if a call fails x number of times.

• XPS 13 9350 wifi to automatically reconnect to the known network

  I wanted to see if the owners of Dell XPS 13 9350 encounter a problem connecting to woman that I have.

  My home wifi Netgear router is set up and I have connected with the password and select "connect automatically".  However, my Dell won't connect when I reboot.

  Laptop Lenovo to my wife and another bridged router remains connected and there is no problem.

  I tried to disable the computer put power off 'allow' pay-per-view network in device, network, power management card Manager, but the behavior has not changed.

  Wanted to see if anyone else has seen cela or not.

  I've rolled back to an earlier version of the Wifi network adapter and have no problem.  I saw several people in researching this issue who has problems with the latest Broadcom driver that is located on the Dell Web site for the 9350 XPS13 perhaps this is corrected in later versions.

• Windows 7 will not automatically accept bluetooth file transfers

  Under vista, I could connect a blue tooth device to my laptop as a phone and send contacts on my computer without using the transfer Assistant. Windows 7 asks me to click on receive a file for each transfer. Does anyone know how to activate auto accepting file transfers in windows 7?

  Hi Gavin770,

  Welcome to the Microsoft Answers site!

  You must click on receive file that will allow your computer to receive files from another device.

  You may need to use some third party software to transfer files without clicking on receive a file each time.

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Apple Watch will not pair manually or automatically

  Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

  Hello

  For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

  

  Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• Connection Bluetooth for mobile phone disconnects every hour

  I connect my laptop to my cell phone (Palm Pixi to be exact) via Bluetooth and use it as a wireless router to connect to the internet. This is my only form of internet I have here in the Woods (Yes, I have cell phone coverage, but no cable/DSL). The only problem I have with it is that the Bluetooth connection is reset every hour since when I first connected to it when I turn on my computer. Normally, this isn't a problem for web browsing, since it will automatically reconnect, but I do a lot of games with her and sometimes download large files, and this reset can sometimes extremely boring all at stake in the middle of a fight and is enough to kill a large download. I searched Google many times on how to change the login/timeout settings and haven't found anything useful. Is that what I can do to change how long the Bluetooth remains connected without discount to zero/expire?

  I run Windows XP SP3 and I stack Bluetooth version 4.00.38 (also tried the latest version, the same question).

  Thanks in advance for any advice.

  What type of connection do you have on your mobile phone (DUN or NAP)?
  As far as I know there is time to stop for the connection of ONE of the side BONES (it was at least the case in XP).

• Lumia 520 bluetooth disconect after 5 seconds

  Hello, when I connect my 520 Lumia by bluetooth, the device disconnects after 5 seconds by itself. I installed the latest version of the bluetooth driver, but the problem persists.

  What should I do?

  It's normal if you do not use the link. Windows Phone does this to save battery power. It will automatically reconnect as it appears the traffic.

• ZBook 15 G2: Earpiece/headset Bluetooth does not connect

  I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

  Can I pair the headset, and it appears in the printers and devices window.

  However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

  If I look in the services:

  Bluetooth support Service: not started, automatic

  Bluetooth OBEX service: not started, automatic

  : Supported Bluetooth started, manual repair

  If I try to start Bluetooth Media Service, I get an error 1053.

  I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
  June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

  Any suggestions where to look next would be appreciated.

  stringy76,

  I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

  https://communities.Intel.com/thread/104851

  If you follow these steps, you should be able to reinstall these updates and your headphones working again.