Flash AS3 error codes

Similar Questions

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite 5100 - error code: 4 short Flash, 1 x long, 3 short films

  Hi all

  After I accidentally served Coke for my satellite 5100 503, it was totally cut off. My brother managed to clean it up, and it began. But shortly after, she turned to and just give this error message by flashing the power before conduit: 4 x SHORT 1 x LONG, 3 x SHORT

  I managed to interpret it using some web sites. This is a 10: 00 hex code and means: 'AC output voltage adapter's more than 16.5 V.

  And here's what they recommend, if the adapter is ok (and it is, I checked):

  After checking the connection, follow these steps:
  Check 1
  Replace the AC adapter with a new one. If the adapter does still not work, try 2 check.
  Check the box 2
  Use a multimeter to make sure the F8800 fuse on the motherboard is not blown. If not, the fuse is broken, go to 3 check. If the fuse is broken, go to test 6.
  Check 3
  Use a multimeter to make sure the F1000 fuse on the battery tray is not grilled. If not, the fuse is broken, go to 4 check. If the fuse is broken, replace the battery with a new one by following the instructions in Chapter 4.
  Check 4
  Make sure battery cables Council are well connected to PJ8820 and PJ8821 on the system board and PJ1000 and PJ1001 on the map of the battery. If they are firmly connected, go check 5.
  Check 5
  The battery or System Board may be damaged. Replace it with a new one by following the instructions in Chapter 4.

  Do you think I should go ahead and change the whole motherboard? I don't think it is a fuse, because sometimes the laptop starts and stays on for 10-15 minutes before turning off. In addition, it does not work with the battery! Only the sector...

  Thanks for you comments, but I really wonder how did you find the error code mean?
  The Satellite 5100 has been delivered with the Toshiba BIOS!
  Please note that different BIOS provide different error codes.
  This means that the 10 h error code mean Phoenix BIOS, something different than the Toshiba BIOS!

  I recommend to contact the ASP in your country and ask the details of error code.

  PS: One of my friends did the same. Shake the glass of coke on the keyboard, and the laptop has been cut.
  New bad dude... the motherboard has been replaced.

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• Cannot get my player or the Flash Player install and/or error code 2503

  I can't get adobe reader or Flash Player update or install.   When I run maainrenance check I get the error code 2503

  Hi Dachbo,

  1. are you able to install any other programs?
  2 have you made any changes to the computer before the show?
  3. what operating system is installed on the computer?

  I suggest you try to install adobe flash player with full administrator permissions.

  How to apply once with a full administrator access token?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Installation problems | Flash Player | Windows
  http://kb2.Adobe.com/CPS/191/tn_19166.html
  http://kb2.Adobe.com/CPS/142/tn_14224.html

  Additional information:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/software-updates-produce-error-codes-2503-and-2502/d484e59e-FA92-4590-8958-4d9e4307f3cf

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• How can I get rid of the error code 0 x 80010108? It wont let me show my flash drive images

  Whenever I put one of my flash drives in the computer to see my photos, it gives me this error code... 0 x 80010108

  Hello DoloresMullet,

  In addition to the response of Azeez N, you can see the thread below with a similar problem:

  http://windowslivehelp.com/thread.aspx?ThreadId=3dd85141-A45D-44D9-a94c-3c7d13cfcd5c

  Thank you

• error code 0 X 80070052 when you transfer the pictures from flash drive

  How can you fix error code 0 X 80070052 when you transfer pictures to a flash drive?

  Hi WilliamThomas376,
   
  Here's a similar post on this issue to which I replied. Check if the given solution helping you to solve this problem.
  error code 0 x 80070052

• Error code 0 x 80070052 when copying the jpg files in a flash drive

  Original title: Why can't copy some files to a flash drive jpg when the rest were ok?

  Here are the pictures taken during a trip. Never had a problem before. Error code 0 x 80070052 came

  Hi SylviaT Springs SA,
   

  0 x 80070052 - ERROR_CANNOT_MAKE the directory or file cannot be created.

  It is a known issue with a variety of USB drives.  You can put only a limited number of photo files in the root directory.

  Follow the steps in the post below and check if it helps to fix the problem:

  error copying file 0 x 80070052

• Canon mp250 5200 error code, yellow light that says alarm starts flashing.

  Original title: canon mp250 5200 error code

  I downloaded the drivers and get an error number I think it is 5200 on printer, the yellow light indicating alarm flashes?

  I tried the evry thing. Can anyone help?  Thank you

  Hello
   
  1 have. what troubleshooting measures you tried so far?
  2 do you have an error number 5200 while installing the drivers?
  
  Method 1:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  This error is that your used ink is full.
  Reset the printer. Press the reset button and hold it while it is. Then, turn it on and press the reset button twice.
  It will go into maintenance mode. Here you can reset your used ink pad. Just follow the instructions and press reset 4 times. Turn on your printer and turns off again and see if it helps.
  Note:  To learn more about the method 2 check the printer documentation to determine the steps or contact the manufacturer.

• How can I fix error code 0x0005FBB6 and all the lights flashing?

  DeskJet 3000 j310 prints one page then stops all illustrates the code 0X0005FBB6 light flash and error on the printer screen.

  I use PC - BSD 9.0

  How can I fix it?

  Ken

  The problem appears in the file I tried to print.

  It was a hand drawn plans pdf file, the first page is a typed page printed but printing the order in a panic when he tried to print the hand-drawn pages.

  Ken

• I need "TweenEvent.MOTION_FINISH" flash as3 code converted to code html5 canvas

  I use a lot of "TweenEvent.MOTION_FINISH" in flash AS3 and move forward to html5 canvas, I need to have the code to do the same. does anyone know how this code to html5 canvas? the code below just hovers over something in the axis pixels 500 X 230 frames and on motion_finish it moves 50 pixels with a different acceleration. I use this for other things like say a different clip to move or fade when another clip is done.

  Import fl.transitions.Tween;

  Import fl.transitions.easing.None;

  Import fl.transitions.easing.Regular;

  import fl.transitions.TweenEvent

  var myTween:Tween;

  var squarex:Tween;

  function squareEnter(): void {}

  myTween = new Tween (textLineOne, "x", None.easeInOut, textLineOne.x, textLineOne.x + 500, 230, false);

  myTween.addEventListener (TweenEvent.MOTION_FINISH, finishF);

  }

  function finishF(e:TweenEvent):void {}

  Squarex = new Tween (textLineOne, "x", Regular.easeOut, textLineOne.x, textLineOne.x + 50, 40, false);

  }

  squareEnter();

  In addition to the call you can do at the end, there are also expected, which is convenient to implement several interpolations at the beginning. Here's their example syntax:

  Target.Alpha = 1;

  createjs. Tween.get (target)

  . Wait (500)

  .to ({alpha: 0, visible: false}, 1000)

  . Call (handleComplete);

  function handleComplete() {}

  Full Tween

  }

  Who would wait half a second tween, the goal of zero plus a second, then call complete Manager.

  One thing that is a little different, is that instead of saying the target as the first parameter, there is the get() function.

• What happens if I get an error code when I try to run Dreamweaver or Flash Pro?

  I get an error code when I try to run Dreamweaver or Flash Professional. Any idea? Error code: (0xc000007b)

  Please check if the following solution works:

  Error: "unable to start correctly (0Xc000007b)."

  https://forums.Adobe.com/thread/1099431

  Concerning

  Stéphane

• Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night updated my O.S.

  Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night my O.S. Update prepares to use the Flash, and now I can't download it. I have I need to work on important projects.

  Hello Becca,

  Please try to download the CC application directly on the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Hope that helps!

  Kind regards

  Sheena

• [urgent]! When I try to download professional flash I get the DW039 error code. And it stop at 42% each time.

  When I try to download professional flash I get the DW039 error code. And it stop at 42% each time. I already disabled my fire wall, but it may not always be downloaded. What can I do?

  You can try an alternative resource for download.  You have not specified the version you are trying to download but then you will have to search the site...

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/tag/DDL

• Error code: 34 Mac OSX 10.8.4 for Photoshop CC, CC bridge, After Effects CC and CC Flash

  Hello

  If I install all versions of the software and all CC, but Photoshop, Bridge, After Effects and Flash installed without a hitch. On these 4 programs, I get the same error code: 34. I am able to install the CS6 variants of them without any problem, and run. Here is the error code:

  Exit code: 34

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -fatal error 1, 0 error (s)

  FATAL: Payload "Camera profiles Installer_8.1_AdobeCameraRawProfile8.0All 7.0.0.108 {D5BBDFC0-C716-46B1-8908-85B0EA49FFA1}" information not found in Media_db.

  -------------------------------------------------------------------------------------

  I was unable to fix this on my own and with that I found online. I will list what I've done so far to try to solve this problem. I tried to use the Adobe Creative Cloud cleaning tool, but the question is for PS, AE, BR and FL not install I can't clean up to try a new installation. "I tried to install the CS6 versions to see if he wanted to download the ' Installer_8.1 of camera profiles.

  Any help on fixing this ASAP would be appreciated!

  Thank you

  NB.

  This solved my problem with this:

  http://forums.Adobe.com/message/4834213#4834213

  It's the relevant part:

  14jackFW06,.

  

  November 8, 2012 19:27 in response to Victor Magalhae

  Report

  Hi victor

  the following fix has worked for me

  Navigate to C:\Program Files (x 86) \Common Files\Adobe if you use the 32-bit system, I think it would be C:\Program Files\Common Files\Adobe

  Name of the folder change 3.

  Adobe PCD-> Adobe PCDold

  backup-> backupold

  Caps-> capsold

  Then run the installer again.

  I'm on a Mac.

  After my 'old' ed the three cases mentioned that I could install and everything!