Flash CS3 Wont start
I click on the Flash CS3 icon to start the program and I looked in the beginning of the process for a second menu (nothing comes on the screen) and then ends with no error message or anything. The only error I get is when I try to open a Flash document I get an error message saying that it is impossible to locate the file. It worked before but it just started today also as far as I know (I don't remember the last time I used Flash it was at least 2 weeks ago). Any ideas? Or how can I see what happens with the process, when I try to load flash?restore your system to a time before the problem occurred.
or uninstall flash
Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html
Restart your computer.
Reinstall flash
Tags: Adobe Animate
Similar Questions
-
A few weeks back, I started to download the trial version of Flash CS3 (I'm still using Flash 8, but have created a CS3 also file I want to re - save as Flash 8). Unfortunately, the internet link breaks when that 80% have downloaded. Adobe has taken, I have download - does that mean that I can't try to download it again? (When I try to do if there is a brief flurry of activity, and then nothing happens.)
If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate it with your serial number.
If you have a problem dl'g, you don't follow all 7 steps. the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site). Thus, your browser must accept cookies for these downloads.
-
Help with the Flash CS3 Tutorial Code effect particle
I did the tutorial from http://www.schoolofflash.com/2008/03/Flash-CS3-particle-effect/ . I used a star to replace the circle. Here is my code:
var starsArray:Array = new Array();
var maxStarss:Number = 8;
function addStars(e:Event)
{
Stars: var = new stars Stars();
Stars.x = stage.stageWidth/2;
Stars.y = stage.stageHeight/2;
Stars.Alpha = Math.Random () *.8 +. 2;
stars.scaleX = stars.scaleY = Math.Random () *.8 +. 2;
stars.xMovement = Math.Random () * 10 - 5;
stars.yMovement = Math.Random () * 10 - 5;
starsArray.push (stars);
addChild (stars);
stars.cacheAsBitmap = true;
If (starsArray.length > = maxStarss)
{
removeChild (starsArray.shift ());
}
stars.addEventListener (Event.ENTER_FRAME, moveStars);
}
function moveStars(e:Event)
{
e.currentTarget.x += e.currentTarget.xMovement;
e.currentTarget.y += e.currentTarget.yMovement;
}
var myTimer:Timer = new Timer (50);
myTimer.addEventListener (TimerEvent.TIMER, addStars);
myTimer.start ();
This time, I'm trying to make the stars shrink and transparent that move away from the point. So I coded like this:
import flash.events.Event;
var starsArray:Array = new Array();
var maxStarss:Number = 8;
function addStars(e:Event)
{
Stars: var = new stars Stars();
Stars.x = stage.stageWidth/2;
Stars.y = stage.stageHeight/2;
Stars.Alpha = Math.Random () *.8 +. 2;
stars.scaleX = stars.scaleY = Math.Random () *.8 +. 2;
stars.xMovement = Math.Random () * 10 - 5;
stars.yMovement = Math.Random () * 10 - 5;
starsArray.push (stars);
addChild (stars);
stars.cacheAsBitmap = true;
If (starsArray.length > = maxStarss)
{
removeChild (starsArray.shift ());
}
stars.addEventListener (Event.ENTER_FRAME, moveStars);
stars.addEventListener (Event.ENTER_FRAME, animeStars);
}
function animeStars(e:Event)
{
trace (this.starsArray);
this.scaleX = 0.01;
this.scaleY-= 0.01;
This.Alpha-= 0.01;
If (this.alpha < = 0) / / remove this object from scene
}
function moveStars(e:Event)
{
e.currentTarget.x += e.currentTarget.xMovement;
e.currentTarget.y += e.currentTarget.yMovement;
}
var myTimer:Timer = new Timer (50);
myTimer.addEventListener (TimerEvent.TIMER, addStars, animeStars);
myTimer.start ();
I couldn't make it work. "I got was an error message saying"
1084: syntax error: expecting identifier before rightbrace. Help?
Try this:
var starsArray:Array = new Array(); var myTimer:Timer = new Timer(50); myTimer.addEventListener(TimerEvent.TIMER, addStars); myTimer.start(); addEventListener(Event.ENTER_FRAME, moveStars); function addStars(e:TimerEvent):void { var star:Stars = new Stars(); star.x = stage.stageWidth / 2; star.y = stage.stageHeight / 2; star.alpha = Math.random() * .8 + .2; star.scaleX = star.scaleY = Math.random() * .8 + .2; star.xMovement = Math.random() * 10 - 5; star.yMovement = Math.random() * 10 - 5; starsArray.push(star); addChild(star); star.cacheAsBitmap = true; } function moveStars(e:Event):void { for each (var star:MovieClip in starsArray) { star.x += star.xMovement; star.y += star.yMovement; star.alpha -= .01; star.scaleX = star.scaleY -= .01; if (star.scaleX <= 0) kill(star); } } function kill(star:MovieClip):void { starsArray.splice(starsArray.indexOf(star), 1); removeChild(star); }
Post edited by: Andrei1
-
Flash CS3: Help me make my movie play, please!
URL: http:schoolsignsonline.com
It is an electronic company sign, so I will try to put a Flash animation of one of their signs on their pre-existing site. No sound, no skin, no control, whole movie, an endless loop.
I imported a video .avi (from PC) of the client in Flash CS3 (on a Mac), and made sure my internship is the same size as file settings.
Saved the file. Test the movie in Flash. * The movie plays just fine *. This is a picture of colourful balloons, growing on a black background.
I publish the movie.
I copy the .fla and .swf into folder flash at the root of the site on my local server.
I go to Dreamweaver CS3 to insert the film using their integration > Flash in the div that I created for this on the index page (which uses only SSI for the nav and footer only - no PHP involved - so each page has an .shtml extension).
I test the movie in DW by clicking on the green arrow in the toolbar properties. Nothing but white. Movie does not play, or if he plays, it's only white.
What the devil. I save the page, leaving the DW to generate the script.
I have download the index page revised the flash (with the .swf and .fla inside files) folder and the folder Scripts of the site on the remote server.
Go to a browser. Nothing but white where the film is supposed to be.
I've asked about this on the Adobe DW on Yahoo Groups group and don't know, thinking it was a problem of Flash. One of them says that the film could not be found. Dang it! This is a script that DW generated when I placed the film in the page! I don't know anything about JavaScript (yet), so I'm not going to muck about in the code to break.
BTW, the HTML code of the page with the movie about it is no longer valid - I hear that this is typical an insertion of Flash CS3 by DW.
Can someone PLEASE help me understand what I did wrong? What other information do you need from me?
Thank you in advance.
Theresa
For the html file generated by Flash, essentially want to copy the script tag in the head section...
in the same place in the head section of the actual file.
and copy the section of the code in the body of starting with and including...
-
Flash cs3... Runtime error? ! ? pls help
When I start flash.exe it gives me the following error
Adobe Flash CS3 has encountered a problem and needs to close.
AppName: flash.exe AppVer: 9.0.0.494 ModName: cooltype.dll
ModVer: 5.4.15.1 Offset: 000a2a98
.. .on the splash screen.
There is a log with the error file.
<? XML version = "1.0" encoding = "UTF-16"? >
-< DATABASE >
+ < NAME = "Flash.exe EXE" FILTER = "GRABMI_FILTER_PRIVACY" > "
+ < NAME = "CoolType.dll EXE" FILTER = "GRABMI_FILTER_THISFILEONLY" > "
+ < NAME = "kernel32.dll EXE" FILTER = "GRABMI_FILTER_THISFILEONLY" > "
< / DATA >
Do anyone know of a solution for this one?When I start flash.exe it gives me the following error
Adobe Flash CS3 has encountered a problem and needs to close.
AppName: flash.exe AppVer: 9.0.0.494 ModName: cooltype.dll
ModVer: 5.4.15.1 Offset: 000a2a98.. .on the splash screen.
There is a log with the error file.
-
+
+
+
Do anyone know of a solution for this one?
-
Add classes in Flash CS3 project
Forgive me, I'm a newbie when it comes to Flash projects. I have the source code for a Flash based written in Action Script 3 I need to change media player. I am trying to add classes to the project in Flash CS3 but after I import and try reference classes in an existing class in the original source, I get the following error when I compile Isaiah:
1172: definition "classname" is not found.
However, the project is based well if I reference no newly imported class. What I'm missing here?
ScottA brief look, you need to import your existing class packet:
Alducente.services import. *;
Also, make sure you provide a path to this package in the editions Flash preferences - you need start with a directory only one level. For example, if your new classes are in a path: c:/documents/classes/alducente/services, you need to tell Flash that you, the classes be in c:/documents/classes - not in c:/documents/classes/alducente
-
I use Flash CS3 and I'm trying to publish a SWF file that makes use of the "FLVPlayback" component I need this SWF file that will be published in an Actionscript 3.0 file, I then put my publication of Flash Player 9.0 and Actionscript 3.0 settings, but get an error as follows:
"WARNING: the"FLVPlayback"component requires ActionScript 2.0."
If someone has encountered this? I'm doing something wrong? I'm quite comfortable in Actionscript/Flash 2.0, but I'm only my first not in the relam CS3 and AS3.
I've also attached a screenshot of the files which represent my FLVPlayback component (or so I assume). (see this link for attachments http://www.actionscript.org/forums/showthread.php3?t=140886)
Thank you all,
Mark
http://www.ActionScript.org/forums/showthread.php3?t=140886Mark,
> I put my settings of publication of Actionscript and Flash Player 9.0
> 3.0, but keep getting an error as follows:
>
> "WARNING: the"FLVPlayback"component requires ActionScript 2.0."Gotcha. You have started the document in AS2, and then changed the
publication settings. Each language version has its own version of the
(Written in the language concerned) FLVPlayback component. Start over and
compare two compleley new FLA documents: make one for AS3 and AS2.
Open the components Panel and note the differences between the two. He
are a different set of components according to the language chosen for the
document. Drag the FLVPlayback components Panel in a
AS3 document and you have the AS3 version.David Stiller
Co-author, Foundation Flash CS3 for designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Flash CS3 crash initially upwards on Win XP SP2
I have a terrible problem. Had my Premium design CS3 a few months ago. I started with no activation and use all software without damaging - as flash. I need to reinstall the system anyway (for other reasons). After reinstallation of the system Flash suddenly stopped to start. It crashes when the red screen red welcome is shown on stage "initialization of fonts" or just after her... so for a very short overview the main frame appears and all disappear leaving no error in newspapers win. I was searched by internet to try to find a solution. I found those such as QuickTime and Flash Video Encoder, uninstallling verified fonts corrupted... I was installing and then uninstalling endlesslly... nothing helps. of course, I had my work time, so finally, desperately, I decided to reinstall the system again and install all of the software on any system clean. So I didn't.
After been installed, I tried the Flash and that made me very happy, flash has started up with no harm... my happiness lasted very short until windows has downloaded and installed the updates. After downloading Flash began to behave like before (crashing at first upward).
Adobe support does not seem to support anyone... I called them again and they could only give me stupid as tips install and reinstall following new. If anyone has the idea, what is the reason and knows the fix, please help... I'll be very grateful that my work is totally blocked now.OK... After months of terrible struggle, I found the culprit... It is the UTILITY of MATROX POWERDESK-HF, which conflicts with the Flash CS3 - I don't know why he had no conflict before, I was ALREADY WORKING ON FLASH using the same machine and its configuration if.
Anyway even when I've updated utilities matrox drivers he same problem, so have just got rid of this utility as it had no impact on work on my machine... all the features works well (including double head)
-
Flash CS3 Professional training for complete Idiots
I recently bought Flash CS3 Professional with absolutely no background in Flash at all. Even after watching the video training from Total Training companion, I am completely overwhelmed!
Can anyone recommend a video or a book that will start me with basic Flash 'no baby', so that I can finally use this amazing software to its true potential?
... Spinning my wheels.Also, the Flash help book can be overwhelming for a beginner. I suggest you
Google'ing "flash tutorials". There are countless sites and dedicated forums
to make expert beginners.May I ask what is your main goal? (animation, web applications, etc.)
"FLBuckeye" wrote in message
News:fbl4jq$1m2$1@forums. Macromedia.com...
> I recently bought Flash CS3 Professional absolutely without flash
> background
> at all. Even after watching the companion of Total training video
> Training,.
> I am overwhelmed!
>
> Can anyone recommend a video or a book that me will start with basic
> Flash
> "baby steps", so that I can possibly use this amazing software to its
> true
> potential?
>
> ... Spinning my wheels.
> -
Flash CS3 transparent background
Okay I tried for weeks on this project, but I know that this is possible. I shot a subject in front of a green screen, and he wants a Flash animation comes from him (the subject) and not substantive. I told her that it could be done. I shot a 1 minute video using old DV cart to make pretty good green screen. I imported the avi clip in Premiere Pro 2 and used the chromakey (button color on some trials) to remove the green screen, while the background was black. I saved and exported in the form of quicktime, compressor codec of animation movie, millions of pix square color. Then, I used Flash CS3 and imported the video to the library by the On2 VP6 codec with the alpha channel selected. I've created two layers, the layer 1 a jpeg image. I have highlighted layer 2, dragged playback FLV to the stage and made sure to layer 2 spoke of layer 1. I saved and tested, but the background is still there. I tried in several ways; recorded a first Pro2 flash file and imported with encoder Flash CS3 using the same steps. I've even loaded and plus version 1.0 of the body and followed a tutorial to the letter. The FLV file plays well, but I do not see the image of layer 1 because the background is black and transparent. All I want is a transparent background where the subject is there no bottom. I have Ultra 2, Visual Communicator, I can make a background of almost anything, but I can't seem to make a transparent background!
Sorry for the long post, but I have this days. I posted this on three other forums (which I pay a monthly fee for expert service) all tell me to do the same thing. I know it must be something small, but anyone would be my hero if they could help me with this one! Thanks - ArtArt,
> I have saved and exported as a quicktime movie, animation
> compressor codec, millions of colors square pix.In order to obtain that the Alpha in the MOV, your settings should
be configured for millions + (not only the million). You can doublecheck on
This aspect?There are also the setting "Alpha channel encodes" in importing video
Assistant. That's what carries the alpha channel in the FLV file. You could
be already do this, but we start somewhere, right? :) We
should be able to understand this.David Stiller
Co-author, Foundation Flash CS3 for designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Tecra 9000 - LED flashes and cannot start
I recently got an old laptop Tecra 9000. Unfortunately, it doesn't have a HARD drive (it was taken and sacked by the former owner).
I bought some hard drives that I thought should work in this machine, but all that seems to happen is that the power light blinks 7 times, pauses, then flashes once (and then repeat this.
I guess it's an error code any.
Readers, I've tried are a MK4025GAS and a MK4026GAX. The result is the same on both.
Can we say what means this error, or even tell me the part number of a disk that is compatible with this machine?
Thank you very much.
Hi Guy
One question; have you tried to power the laptop without inserting the HARD drive?
Usually if the laptop is ok, it should be possible to boot the laptop. Of course the laptop will not load the Windows operating system because the HARD drive is missing but it should be able to start and the led must Flash not!But if it flashes, it means that the fault was detected on the motherboard and the LED lamp sends a blink code.
Short blinking means 0 and 1 long flashing
Error code starts with LSB (least significant bit)
for example:
0000 0001-> 1000 0000This code you need to turn it into hex and you will get the error code.
But in my opinion, no one will give you an answer what it means.
Each laptop clean error code series offer... -
? How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk. It also has stickers with license numbers.
Hello
There is no download free and legal Internet for vista
Here are the different ways to reinstall vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
ICH bought Flash CS3 Professional um ein paar Korrekturen in einem alten Programm physician zu können.
Version out I think ich auf die unter der Adobe-Seite
Aber're fehlt mir ja die Seriennummer.
ATMs are non Seriennummern as CS3 von Adobe war nicht vor langer Zeit?
Wo gibt oder are eine Testversion? ICH m only for few weeks die Version.
You can download the trial version of the software through the page linked below (you can use your current serial number to activate it if you happen to find it.)
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
I need Flash CS3 for my work. How can I get the serial number?
Hello world!
I'm working in the studio of animation using Flash CS3.
I downloaded the Flash CS3 trial version from the Adobe Web site.
How can I get the serial number? The legal way of course!
I searched through the Adobe website and found no idea.Thank you!
You can not buy Adobe.
You can try your luck through a 3rd party like ebay etc.
-
I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?
Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.
Maybe you are looking for
-
Where can I find the credit of the Attorney general and the Apple E-book class regulations?
I was advised that I have a credit on my account, but I can't find this information in my account from anywhere. Help!
-
I have a PC Hp laptop model Hp 15-d017tu. I have a windows 7 64 bit after the new installation of windows and installation of all the drivers for the chipset, a PCI Bus driver has not been installed. Please tell me how I can install driver PCI. Conce
-
I no longer get the option 'Extract' when right click on a zip file
Original title: IE and Zip files Since the update to IE8, I no longer get the option 'Extract' when right click on a zip file! Help!
-
Can't get PC to recognize TV as an external monitor
I try to use my new HD Stream Warpia hardware that broadcasts wireless video and audio to my TV but a USB port on my PC and a HDMI port on my TV. The problem is that I can't get my PC to recognize my TV as an external monitor, or extend my desktop or
-
Connect the Labtop using USB Port of labtop to TV USB Port will this work?
How to connect my laptop to the tv via the USB Port of labtop on Port USB HDTV Compatible. Sony's Connect Via a USB port on the Emerson HD TV Thank you