Connect the Labtop using USB Port of labtop to TV USB Port will this work?

Similar Questions

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  I have

  I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  -What I else I need / have to do?

  Yep, it shud work.

  https://helpx.Adobe.com/Lightroom/help/import-photos-various-sources.html

  Restore a backup catalog

  • Choose file > open catalog.

  • Navigate to the location of your backup catalog file.

  • Select the backup the .lrcat file and click Open.

  • (Optional) Copy the catalog to the location of the original catalogue to replace.

• It is supported to connect multiple monitors using USB as a video source?

  Original title:

  USB touch screens

  It is supported to connect multiple monitors (specifically wireless) using USB as a video source?  If so, a hub would be able to handle this or the USB connection should be made directly to the motherboard or the PCIe interface.  Thank you!!!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  You can buy a switch HDMI that allows you to connect several devices to sources HD (e.g., monitors, TVs etc.) to your computer, while using only one cable HDMI (VGA or DVI) of your computer to connect to the second monitor. So you can get a HDMI switch on your favorite search engine for compatibility information for the switch with Windows 8.1.

  If you want to project, or sharing of the wireless display, you can use the utility Miracast.

  See also the article below to better understand.

  Plug a second monitor or projector

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

  Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

  Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

• The VI "VISA set up the Serial Port" will only work at 9600 baud

  I wrote a Serial Port RS232 RW.vi monitor of ' "which works for most. The problem is that it will not meet the alternative port configuration settings... For example: the default RS232 serial port configuration is:

  (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity)

  As a test, I use a Null Modem cable to connect to my LabView Com1 port to another PC running RealTerm Serial Port Monitor... Using my "RW.vi RS232' newly designed with the port settings of (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity), I can send and cannot receive data back throughout the day no problem...

  However, if I configure the port "RW.vi RS232" all other configurations, such as (COM1, 2400 baud, 7 data, 1 stop bit, odd parity bits)... He will not take the expected risks and continues to operate @ 9600 baud rate etc.

  Then, I changed the settings default "RS232 RW.vi" (2400,7,1, Odd)

  He still refuses to derogate (COM1, 9600,8,1, no...)

  I also went in the Device Manager of Win XP on the system of LabView and configured manually Com1 2400,7,1, Odd

  and yet,... work at the "RS232 RW.vi" @ 9600,8,1, none

  Everyone can test my VI in the car and see if they have the same problem of not being able to see the new changes in the Port configuration settings... other than (COM1, 9600,8,1, no...)...?

  FYI... Unfortunately my LabView runs on Version 6.0, you may need to up-conversion of the attached vi

  Instead of simply appreciate the comments, you need to implement.

  Having closed VISA inside the loop is definitely the problem.  And Crossrulz is 100% correct about the problem being that the serial port gets zero to default baud rate after the closure of the port.  Here's the proof.

  

  Note that while may have set the port settings manually in the Device Manager, these parameters are reviewed by the pilot VISA.  If you look in the measurement and Automation Explorer under devices and Interfaces > serial and Parallel, you'll see the default settings using the VISA driver.  If you change this setting, your program will work as desired.  But this is not the appropriate fix.  The correct solution is to get the VISA close out of the while loop.

  The port settings are established in this order.

  1. by Windows device drivers.

  2. by the VISA driver as set in MAX.  Since you are using VISA, these settings will be automatically replace #1.

  3. by the port settings, you set programmatically in your LabVIEW program.

• Envy of HP Dv7 - 7223cl Windows 7 Ultimate 64 - Bit: USB 3.0 Ports will not work.

  When I plug my mouse into one of the USB 3.0 ports, Windows does not sound has indicated that it is connected. I did a clean reinstall there two days and most of my drivers installed, but they do not work. A store local deleted Windows 8 PC and installed Windows 7, a few weeks ago, and USB 3.0 ports was working at this time, so drivers exist. After having some problems, I decided to do a clean reinstall of Windows 7, which has deleted all my drivers and I was able to reinstall most of them, but USB 3.0 ports has not worked since and still not working. I looked on the internet, but I couldn't find the right one. I looked in the management system and found that two devices: PCI Device and SM Bus controller are shown with a yellow sign. After looking under properties, I found that the two do not have their drivers installed (Code 28). Anyone know where to find the drivers for this problem?

  Nevermind, it works now. I just had to uninstall and reinstall all components of AMD. Thanks for your information!

• The plug-and-play USB mouse will not work on Satellite A100

  Hello

  I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

  Please help the mouse works.

  Thank you very much

  Hello Jayne

  It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

  As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

• Connect the 7610 with USB cable

  Hello

  Try connecting a HP7610 printer to my XP laptop that only has USB ports

  Is it a USB 2.0 has a cable work?

  Thank you

  JF

  Hi @hp7610,

  Welcome to the HP Forums!

  I noticed that you are trying to connect your HP Officejet 7610 to your Windows XP laptop. I'm happy to help you!

  You'll need is a USB 2.0 A to B cable, so that it works correctly with a USB connection.

  Moreover, according to the specifications of your printer, Printer Specifications for series e-all-in-one HP Officejet 7610 Grand Format (H912). You can use an Ethernet cable or a wireless connection as well.

  Hopefully this information is what you are looking for and have a good day!

• the Windows 7 usb Installer may not work on the usb port 3

  Windows 7 install usb does not work on the usb port 3 with 32 GB usb 3 keys, says he needs a cd/dvd driver?

  but there is no cd drive in this machine.
  Works very well with an old USB 2 on usb 2 & usb ports 3 in the same machine.
  But no usb 3 key into a usb port 3?
  any ideas?

  Thanks anyway JW stuart.

  I managed to find a way to do it, I needed to set the usb drivers 3 unzipped on a 2nd USB on usb port 2 to use when the Setup program has been started and lost the USB 3.
  the ol F6 trick always works with win 7 and is more flexible, now that it allows pilots more than just raid.

• How can I connect the HOST PC COM port under cRIO 9074?

  I can't find any HOST PC COM port on my cRIO.

  I tried to use the global variable, but it was useless.  Is there a solution?

  sad0000 wrote:

  I can't find any HOST PC COM port on my cRIO.

  And why should he?  A cRIO is really another computer.  You expect your PC to see serial ports to another PC on your network?  No, you wouldn't.

  If you really want the cRIO again the serial port of the PC communication, then you will have to apply on the PC that can communicate with the cRIO, usually over TCP/IP or network stream.

• Satellite L750 - if I use the recovery disc HARD Will this work?

  Guy Alrights

  I have a L750 machine that gives me problems at the moment, so I'm going back to Strath, as when I brought brand new... So I wonder if I use HARD drive recovery which will be re install windows and all the drivers and all the pre install software? Or what will be installed?

  Hello

  HARD drive recovery would fix the laptop back to factory settings.
  Recovery of HARD drive installs the image of Toshiba. Toshiba is a package that contains the system Windows, drivers and tools and utilities.

  But I read the other thread you created here, and it seems you did a clean installation
  In this case the HARD disk recovery would not work more :(