Can't get PC to recognize TV as an external monitor

Similar Questions

• Portege R200: Can I get resolution of 1920 x 1080 on external monitor?

  Hello!

  I had some problems with my new Samsung TFT external. I hope that someone had an idea.

  Is it possible to get a display resolution of 1920 x 1080 with the R200?

  Its data sheet his writing something on an external resolution 2.048 x 1.536...

  But when I connect the tft, press fn + f5 to switch on external tft im just able to 1280 x 1024.

  I installed the driver of Samsung SyncMaster and the problem is already there. No higher resolution then 1280 x 1024 at 60 Hz for my

  TFT new even if I try to expansion of the Office on the other screen. ??

  Hello

  Eventually, you will not be able to use your preferred on external monitor resolution.
  There are two reasons why such a resolution is not available;

  (1) the chip graphic card does not support external resolution
  (2) the graphics card driver could not support this resolution.

  If the chip of the graphics card does not support external resolution then a driver update will not help you

  But if the graphics card would support such a resolution, but resolution is not yet available, so the graphics card driver should be updated.

  In any case, first check if the graphics card that support. For this you need to check the user manual, I think at the end of the user manual, you can find all available resolutions.

• Tecra A2: Can I get resolution of 1680 x 1050 on external monitor?

  I want to connect to my laptop (Tecra A2) on my screen, but I can't seem to get the driver to allow this kind of resolution wsxga + (1680 x 1050). The graphic details are Intel 82852/82855 with intel extreme Graphics 2.

  A much higher number of pixels is supported so why this is impossible.

  Hello

  I can tell you why it s is not possible because the screen resolution is not supported by the graphics card driver!
  You can try to install the latest graphics driver from Intel page but if the resolution is not available after installing the driver there is not much to do.

• How can I get my itunes recognize my ipod touch after upgrade to windows 10

  I can't get my itunes recognize my ipod touch, after that I have upgraded to windows 10. I upgraded my itunes and my ipod touch (6.1.6) my drivers. It worked until I've updated but not now. My ipod nano recognized bnut isn't my contact. It appears in 'the PC' under the apple ipod, internal storage. How can I get this to work?

  First test:

  iTunes: fix iPhone or iPod not detected Windows 10

  Then, try

  iPhone, iPad, or iPod not recognized in iTunes for Windows

  -I would like to start by

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  -New cable and another USB port

  See also:

  iPod not recognized by iTunes windows - CSA

  Troubleshooting problems with iTunes for Windows updates

  -Try on another computer to help determine if a computer problem or iPod

• I can't get Lightroom 3 recognize my iphone 4 when I opened import.

  I can't get Lightroom 3 recognize my iphone 4 when I opened import. Nothing comes. It is not the cable or the port that the phone is recognized by other applications and importers of photo on my computer. Someone knows how to fix this? Thank you! Miranda

  Hi Miranda,

  Could you please copy the pictures from your phone to a folder on the desktop and then go ahead and import the images into Lightroom?

  Kind regards

  Tanuj

• I just installed my copy of cs5 in a new computer windows 10 - How can I get it to recognize my NEF files, as it did in my old laptop?

  I just installed my copy of cs5 in a new computer windows 10 - How can I get it to recognize my NEF files, as it did in my old laptop?

  Could you please install the DNG Converter, and then it should help

  Installation link: Adobe - Adobe Camera Raw and DNG Converter: for Windows

• I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  CS6 C

  I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  The CS6 capture Tin can, set up a message that a capture device is offline.  Camera Sony DCR-TRV340 is not listed in the CS6 device Type list in the CS6-DV/HDV cameras Sony device control settings box.  I downloaded what I believe are the right drivers for the TRV340 and when I connect the camera to the computer, the computer shows it is in the box devices and printers, but CS6 do not recognize.  Do I need to install these drivers in a specific CS6 program folder?  If Yes, where can I find these drivers in the Professional operating system of windows 7, and in which folder CS6 would copy their?

  Thanks John,

  The controller IEEE 1394 of switching for the Legacy driver did the trick.  CS6 now recognizes my camera.  Thank YOU MUCH for the help!

  Chuck

• Pavilion Elite m9250f: can't get m9250f to recognize the new gfx card

  I recently did a clean install of win7 on this machine, I got my college (they had their retirement, and I work for their IT Department). I swapped the 8600 out stock for a 9800GT and I can't get the machine to see it's there. I do not know what BIOS setting must be on (or if there is a BIOS update!). Any help would be appreciated.

  Account born Pi day!

  Found the problem: power supply in this case is 250 watts, 400 card needs to run. D:

• Impossible to get resolution of 2560 x 1440 on external monitor on T410 with Nvidia NVS 3100 M

  I have a T410 with Nvidia NVS 3100 M with the driver version 189.55 connected to the external Acer monitor capable of 2560 x 1440, connected with DisplayPort cable. But, I can't get higher than 1920 x 1080 resolution. What should I do?
  Thank you

  I was using DisplayPort, but it made no difference. Finally, when I've updated my driver Nvidia lenovos site, it worked perfectly. Thank you

• Can I use a HP Mini 110-3190SF with external monitor of higher res?

  Totally new in the world of netbooks! Just bought a HP Mini 110 - 3190SF, thinking I could use it with my external monitor sometimes to take off the stump of my eyes... but the highest display resolution that Windows 7 allows me is 1024 px. (My external monitor is 1360 px). In addition, 1024 px is even properly displayed on the external monitor - the left side of the screen (including the Windows Start button) is off the screen.

  Of course, I tried the settings of the screen itself to have at least 1024 px is displayed correctly, but not joy. Ideally, I won't be able to change the output to 1360 px resolution, to take full advantage of the external display. Looking at this forum, it appears this is possible on older netbooks (Windows XP) but it does not seem possible when you run Windows 7. ??

  Obviously, huge disappointment if I'm limited to 1024 px (and even who does not display properly). All the solutions to one of them? My output doesn't appear to 1360 px? Or, failing that, at least to get my 1024 px displaying properly on the external monitor?

  Any help is appreciated...

  Thanks for the help. In fact, I solved the problem - not by installing the graphics driver, you suggested, but by installing a driver for the external monitor special I use (first time I've ever had to install a driver for a supposed to plug-and-play monitor!) and then play around with the settings. This allowed me to choose a higher resolution to 1024 px for the secondary display (IE, the monitor).

  If someone else gets stuck on this, I can give a step by step, but probably no one else would have taken longer than me to know what to do!

• Had to reload operating system and applications data, now can't get firefox to recognize the profile data

  My C drive (disk solid state drive), which held my operating system and data from the app crashed. I had it replaced, updated Win 7 to win 10 and have downloaded Firefox. I was able to restore my profile from a Mozy backup data and copied in the Firefox folder. But Firefox resolutely refuses to recognize. I tried using the recovery data from an old profile, but no advantage help page. Tried to use the Manager profile, but without success. When I go to Troubleshooting Information and click on file/Show profile, it comes up with a list of files (files starting with bookmarkbackups, which however is empty, down for webapps, which has the file inside webapps.json), then the files from addons.json down through xulstore.json and the file places.sqlite is 10 240 KB Although there is something in there, but Firefox resolutely refuses to acknowledge my profile, bookmarks, etc..

  I'm out of options and ripping my hair out trying to get all my favorites, in which I have a lot of information such as the authentication of data for many favorite sites. It is frustrating that all the information seems to be there, but Firefox ignore all.

  Can anyone help?

  Such a backup is perhaps a ZIP archive containing all the files into it if it is not a real file, but only one file.

  Note is that you replace the file places.sqlite with a copy of the backup that you have to make sure to remove existing places.sqlite - shm and temporary files to SQLite places.sqlite - wal.
  Ditto for the other SQLite files that you are restoring.

  Have you checked the application.ini file in the backup?

• How can I get photoshop to recognize my Tablet?

  I have a Monoprice interactive pen display and photoshop cs6. I am currently unable to use the pressure sensitivity of the pen for her because of the indicator with an exclamation point in a yellow triangle that appears.

  I studied this on several sites and I ave been informed that this means that photoshop does not recognize my tablet. I tried to uninstall and reinstall my driver. I tried to delete the file. and I tried unistalling and reinstalling photoshop cs6. None of these solutions worked.

  I didn't have this problem before, until I've had my computer wiped in order to get rid of a virus. I backed up all my files from my computer, put it on an external drive, then replace all of these files on the computer.

  Anyone know how I can fix this problem?

  RC

  As none of those produced MS I suggest your best bet is to contact the manufacturer of pens and Adobe, if it worked before they should be able to help solve the problem.  We do not have knowledge of one or the other.

• Can't get ADE to recognize my kobo - help!

  Today I bought an aura of kobo. Bought a book from kobo stall that reads very well.

  The main reason I got was an ereader for eBooks in the public library. If I tried to get a book from the public library on the kobo. Successfully transferred a few books from the public library to the kobo via ADE but when I tried to read the books on the kobo, I got a message saying the document was not allowed. Advice on the web, I deleted ADE in the folder of kobo on my pc in order to force the ADE to start from scratch and reinstall on the kobo (and files ADE in kobo file had said that there is an error). ADE recognize today the kobo at all. ADE installed on another computer, but had the same problem, it does not recognize the kobo. I tried so many things to try to fix the problem that I'm completely confused. Oh, and along the way I have done a factory reset on the kobo.

  Any ideas/tips?

  Hey, I think I have it solved!

  (My library ebook account finally unlocked) I tried the solution suggested by Overdrive or use an earlier version of ADE. Did not work. Reinstalled ADE v4, downloaded some books from the library and copied on my Kobo... and I can open and read books on the kobo!

  It has been so much hassle to get to that point I half expected this not changed, but for now, I'll just enjoy reading my library on my kobo books.

• I need help with my streets & trips, and I can't get anything to recognize my product key

  I get the error oxc004d301, tried the help site and nothing works.

  Hello

  I suggest post you you question in Streets and Trips forum for better support.

  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

• I had 2 HDD failures, now I can't get Win7 to recognize my product key. How can I fix it?

  I still have the disc/package/book of original Win 7 and I have the product key that is written correctly, so I know I'm there by typing correctly.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us