flash drive for the new Pavilion touchscreen

I have a new laptop Pavilion touhsmart, 15-no47cl.   Need to make the recovery disc.  I have a USB sandisk flash drive to 2.0 GB.  Don't know if it will work.  The Instructions don't tell you what to buy.

I'd appreciate any help / it has Windows 8.1 which I am supposed to be updated too... but it tells me that there could be problems with the update.   Him did not go so far.

Thank you

Hello

You must buy a 32 GB thumb key. Yo took about 24 GB, but I don't think you can buy 24 GB stick on the market today. 2 GB is too small.

Kind regards.

Tags: Notebooks

Similar Questions

  • Use the flash drive for the paging file

    Hello. I would like to use a USB flash drive for the file rather than the HARD disk to increase performance on an older system. I've set up to use the flash player and the system restarts. But whenever I check, it uses the HARD drive. Why doesn't the setting?

    Hello. OK, well I got what I was doing wrong. I never put the c: for not having a swap file.

    http://www.ehow.com/how_6054256_use-USB-memory-RAM-XP.html

    @greenestguy

    Swap file cannot be larger than 4 GB, so no need for a 8 GB flash drive. Save some $$.

    Don't know why it would be a bad idea because MS have programmed it in Vista and Win 7 as ReadyBoost. I suppose there is always the chance that I don't see any difference on the old hardware, but I do not see how it would break anything.

  • Replace the HARD drive in the new Pavilion Elite HPE-180 t.

    I'm not a professional computer, but after 30 years of use, the upgrade and repair PC home and the office, I'm embarrassed to post this thread - but here goes.  I took delivery of a few days ago the new highest indicated HP computer model in the topic of this thread.  The new computer is beautiful and everything worked perfectly from the start.  I decided after a few days to check, everything was fine and proceeded to a few pieces of hardware to transfer from my old Dell (a fairly new 1 t WD SATA HDD on which coied got a lot of data from the former count and a new BD/DVD ROM SATA optical drive).  Everything was fine once I figured out how to get these two drives in the enclosure waterproof on the new computer, but all reconnecting the SATA cable on the main came with the computer HARD disk, I broke up some pins on the HARD drive that made it of course useless SATA port.  I of course take full responsibility and do not wish to get involved with HP technical support to replace the disc - and frankly, I prefer not to put another HDD Seagate support because I prefer a 1 t Cavier Black SATA WD which I believe is one of the most reliable RESEARCH on the market right now, and I can buy it for around $200 instead of the $400 I uknderstand fresh HP for the same size of Seagate replacement.

    Here's my question, can I just buy a new HDD WD and install it with my own final Win 7 x 64 without the HP recovery disks (they did not come with the new computer, and I had not yet created my own recovery disc).  Frankly I'd rather have a completely clean install of my Win 7 OS without the HP partition and other HP software on the HARD disk.  Is this possible or HP has some sort of identity with their software which must correspond with the BIOS or something like this?  REALLY, I don't want to return the computer to HP to get called into service because I just started a small business that involves a lot of video editing and I can't be without the computer for weeks, while HP is concerned with him (I've read the horror stories about the high cost of the repairs and the long repair time but I do not wish to keep my warranty if possible).

    HP Pavilion Elite HPE-180 t; 2.8 Ghz quad-core Intel i7 CPU; Intel x 58 chip; Win 7 64 bit ultimate OS. 12 G RAM;
    1.8 NVIDIA GeForce GTX-260 G graphics card; HP w2338h HD widescreen LCD monitor

    I have the same PC, only the model number has been changed.  Yes, you can use your own license W7 and install it on another drive or a replacement drive.  You can get the drivers from the HP site web support HPE-180 tfor your PC or other sources.

    Some software manufacturers third HP is very useful, so you might want to consider ordering the HP recovery discs and make a full recovery to factory.

  • With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

    New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

    Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

    I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

    Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

    Thank you.

    Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

    You may need to take possession of your old documents folders - see win help to find out how

  • How can I move photoshop to hard drive for the new macbook pro

    My macbook is dead but I have the hard drive connected via a USB docking station. How can I transfer my Photoshop CS5 (and the rest of the suite adobe) on my new macbook? I have the box and CD, but the new machine isn't a hard drive?

    Thank you

    Download here

    Download the CS5 products

  • Windows 7 cannot find any driver for the new Ultra 6 Vodafone Smartphone

    'Android' and 'BAD' listed device driver drivers but says not installed driver or an unknown device in function of what I tried. Devices and printers displays two icons Android under the title unknown. Maybe two because I tried to install/connect this twice.

    Vodafone does not result of PC as Nokia or on Samsung Kies, so what I can do. I want to Exchange images and music in between?

    I welcome all updates automatically, Ramesh and I went to your link, but there is no update or link to solve this problem.

    The problem is that Windows 7 is incompatible with my new camera. I finally managed to contact someone at Vodafone which was more of an expert than before and after having followed his instructions, the PC had not yet installed the drivers for my camera.

    However, I have a solution! Forget the connection of the USB cable and...

    Someone recommended I try the AirMore app - and it solved the problem completely. With his help I am transferring files via WiFi. Once installed, you have to visit the website for AirMore and 'connect' the handset and PC live, then anyone can do anything that they could do it using a USB connection.

    I am very happy that I found this alternative. It will work no matter what OS you use or what type of phone. A near universal solution. Applause to its developers!

  • Error in the driver for the new DVD player,

    The SATA DVD drive is nine, works of a system boot when I put in a windows install disc and do a start up cold, but drive does not work to complete startup. Got update driver and same driver deleted and reloaded, still does not work, contact manufacturer (Memorex) not much help from them other that telling them that this is a conflict of microsoft. Checked the settings of currency, system error Code 39 in the properties of the device such that the system does not recognize the reader cannot understand cela one, seems to be a software conflict but do not know if this is another driver or Vista conflict causing the error code. Flat, system does not recognize the drive. After running the driver update you get a msg saying the system thinks that the best driver is already installed.

    Hello

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • Where and how can I reinstall the external hard drive to the new HD to the computer?

    Original title: HD crashed.

    I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

    Hello!

    You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

    Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

    If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

  • Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo

    Hello.

    So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:

    Audio device on High Definition Bus Audio

    Ethernet controller

    Network controller

    SM Bus controller

    USB controller Universal Serial Bus

    Video controller VGA compatible

    I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?

    Hello:

    I doubt that you will be able to do all this work, but that's...

    Your PC has the IDT audio controller so the Realtek audio drivers do not work.

    First install the AMD chipset driver and restart. You want the first file in the list.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

    Graphics: See if this driver works...

    http://support.AMD.com/en-us/download/desktop?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

    Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.

    http://www.QCA.Qualcomm.com/resources/driverdownloads/

    Try this driver for the wireless card:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    Audio: See if it works...

    Scroll down to the bottom of page to:

    IDT_HD_Audio_6469_xp_win7_win8.zip

    http://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387

    All audio drivers it try also.

    If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files.  Download and unzip the file.

    Go to Device Manager and click on the smbus controller device.  Click the driver tab.  Click on set to update driver, and then select manual search method.  Select disk, and then locate the file you unzipped\SMBUSamd

  • I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

    I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

    original title: hard drive problems

    (1) what does your BIOS the drive size?

    ============================================================

    2) disk hard test - find your make and model:
    Speccy - computer/system information in detail
    (More detailed look at your memory and CPU)
    OS, CPU, RAM, card, graphics, hard drive, optical drive
    Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - CD Bootable:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    ================================================================

    (3) HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    -Partition management utilities-

    Partition Wizard Home Edition:
    http://www.partitionwizard.com/free-partition-manager.html
    Note: There is also a CD bootable or versions of the bootable Flash drive:
    CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
    Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
    Among the features and functions: create partition, Delete partition, format partition,.
    A partition resize, move partitions, Partition recovery after an accidental deletion,
    Convert the partition, partition Explore, Hide partition,
    Change the drive letter, a partition active Set, Explorer (content display) of the partition.
    Note: To complete any task use the "Pending Operations" box at the bottom left.

    Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
    EASEUS Partition Master Home Edition (free):
    http://www.partition-tool.com/
    Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
    Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
    It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

    J W Stuart: http://www.pagestart.com

  • I don't then create a new folder on a flash drive as the NewFolder button no longer works. Are we supposed to now call a folder a Briefcase?

    I don't then create a new folder on a flash drive as the NewFolder button no longer works.  I have to select the napkin instead of NewFolder; so, I get an icon Briefcase instead of a folder icon open when I open the flash drive.    Are we supposed to now call a folder a Briefcase?

    Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
     
     
     
    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
     
     
    Or:
     
     
    If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
     
     

    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
     
     
  • No driver for the Flash drive on the HP website

    Hello.

    I just bought a HP USB Flash Drive v125w of Fry.

    I just wanted to save my files if I can get a new computer.

    After putting in the Flash drive, my computer said that there is no driver.

    So I go to the HP website to download a driver for this product.

    I can't find a. I can find a driver for the v120w driver, but not my v125w driver.

    This is a new product... Why is there not a driver?

    I call HP and ask... where can I get a driver? Why is there a driver for this product? And if it does not exist, can you please tell me what Flash Player I can use with my Windows 98 computer?

    Of course, they can not answer simple questions. They don't know anything. All they can say is "if it isn't on the Web site, then there no driver." They can advise me on Flash Drive can I use for my Windows 98 computer, and where a driver is available.

    I can't believe that I've had to work so hard to get so little information. Incredible.

    Can someone help me?  I just need a pilot to save my files so I can get a new computer.  Someone can tell me which driver I can use for Windows 98 and has a driver to help me install it?

    I can't believe that HP could not answer that for me. Totally LAME.

    Message edited by Soliel 08/25/2009 12:51

    Thanks for the reply.

    Just for the record, I punched in this product several times in different ways and came up with nothing on the HP site.  I came to the top with the 120 series but not the 125.  I don't know how you did it, but I couldn't.

    And the package doesn't say anything about compatibility.  He uses that word at all.

    Nevertheless, I thought it on mine... without the help of HP.

  • Pavilion a6500f: can I use my old hard drive as a second drive to the new I install.

    I have a Pavilion a6500f I can access is no longer as he continues to tell me there are registry errors.  My recovery disk (I got a) or do a hard reset or else he will start.  It came with a window that says recovery system or start Windows normally.  I get a new hard drive to it and have a whole new Windows 7 installed.  The thing is that I don't want to lose all my stuff on the old hard drive.  So my question is can I install the OLD hard drive as a second drive to the new?  If I can then I can just copy all the files from the old drive to the new and use the old as a memory drive.

    Any help will be greatly appreciated.

    The simple answer is Yes.

    (1) I would like to replace the hard drive with the same drive size or larger. But does not exceed 2 T.

    (2) I hope you made the original recovery DVD set the original recovery firstly, DVD media DVD + R try as these will save you having to create a driver disk.  If you really have to buy a complete set of recovery, get it here. It will have all the necessary drivers.  Only $27.00

    (3) I copy the files and destroy the old disk. Its usefulness is damaged since 2008.

  • Satellite M30X-165 - need a driver for the PCI Flash memory

    Hey,.

    I need a driver for the PCI Flash memory, I have already searched the web and posted in other Forums, but I can't find anything. I heard he is hidden somewhere in another file... ? !
    I have a toshiba sm30X-165

    I would be very happy if someone can help me!

    Kind regards

    Freddy

    Drivers for Satellite M30X are placed in the archive on the European driver Toshiba page.
    Product type choose Archive.
    Then the Satellite-> Satellite M-> Satellite M30X

    There, you must download and install the Cardbus and Chip Set Utility driver

  • driver for the ethernet connection on Pavilion M7750n

    Can someone direct me to where I can download the driver for the ethernet connection on Pavilion M7750n?

    The list of specifications HP:

    Hello:

    No, use the chipset XP driver...

    http://www.nvidia.com/object/nforce_winxp_15.26.html

Maybe you are looking for