Error in the driver for the new DVD player,

Similar Questions

• IDE 1 error with the new CD player - Satellite 2410-504

  Hello

  Can anyone help please? I have satellite s2410-504 (number PS241E-6HWP1-EN) and my laptop CD drive is dead and I exchanged for a new one and now the IDE 1 error. I presume that he is a master / slave number and the reader has no way to change to cs etc on the drive itself.

  I was told maybe there may be a way to fix this problem of flashing or play with the connections on the motherboard of the ideas please?

  Thank you
  Mel

  You bought the disc is not compatible. It before the BIOS cannot recognize it because bad csel/slave/master settings.
  Of course in the net, some gossip circulating that it should be possible to some flash drives, BUT I also read that, after these procedures, the drive was dead and could not read media.

  I n t recommend something flashing. I guess this drive is new and you must contact the dealer and replace the drive for a new compatible.

• Deliver the new DVD player.

  After you have installed a replacement from dell DVD player in my Office Dimension 4700 running XP PRO, the system shows the old drive with description of the DVD-RAM drive (D :). Drive D: is the name for the original DVD drive, which is fine. However, the system now displays a new disk, disk removable (f). This drive F: actually does not exist. How can I remove it. Any help is appreciated with gratitude. Thanks in advance.

  Dave

  Ok.

  I don't see that attaching your Kodak 50 in one has any merit of diagnosis.

  You have not said what happens if you insert a memory card in the HP.

  Internet research indicates that the Dell 942 also has a card reader location. That do my previous test and see what happens.

• Workstation XW8000 with XP recognizes the new DVD player but will not read DVDs

  I just added a DVD player for my HP xw8000 workstation. It is being prepared to try installing Windows 7. Windows 7 Upgrade Advisor says that my machine calls brilliantly... all green. Also, because many new software products are released for MSDN on DVD, it is necessary for me to be able to use this DVD ROM.

  I installed the DVD drive is recognized by WinXP Pro with all the latest service packs. Shows up as drive E in Explorer, it appears as a CD ROM In Device Manager it is listed as E - IDE DVD - ROM DVD-8212. However this player will not read a DVD!  I tested the DVD media in another more recent machine and it reads very well in a same DVD ROM.

  Is there something wrong with the xw8000 it cannot read from a DVD ROM drive?

  Thanks for any help.

  Weird that you receive notifications by email of responses. Usually, this is the default setting. When you type a response, it is usaully a box that is checked to receive notifications by e-mail. (Top right)

  I agree, the DVD player seems to be defective. It should work with only Windows drivers. The only additional files that you need would be to play movie discs, etc.

  Are your jumpers on both drives positioned same_If the cd drive is jumper as master, the other slave as you. If the other player is cavalier CS (cable select) the dvd player must be linked, CS. I think most of the HP machines are CS. Try that to see if it solves. If this isn't the case, maybe time to try another drive.

• Satellite 5200 - need master/slave patch for the new DVD player

  I need a patch for DVD to use in a Satellite 5200.

  My original DVD is broken, so I bought a Toshiba SD-C2512 DVD but it does not work inside the Satellite, but with adapter to my desktop PC.
  I patch the DVD in master.

  Where can I get the file and the prog for patch?

  Hello

  I think that these patches do you mean are not available and as far as I know if you can spend a notebook of the master to the slave, for example there is a jumper on the drive.

  However, to me it sounds like this drive is not compatible with this laptop. Not every disc is compatible with all laptop (g. pins assignment.) e  ;)

  You must buy a new one and check the user's manual. There you should find a list of compatible drives.

  Good bye

• After new XP installed the computer sees my old CD Drive not my new DVD drive

  After new XP installed the computer sees my old CD Drive not my new DVD player.   My newest DVD burner was in the computer before I did the reformat and install again, but for some reason any my old CD player shows. He is no longer in the machine!

  Yes, I did what the measurements LITEON told me to do and I work like a dream! I went to do computer right click, click on manage, click on Device Manager, click on CD-ROM/DVD-ROM, double on this box, click on DVD region, mine had an empty box, I sailed to USA clicked OK, did a restart AND IT WORKS LIKE a DREAM!     I hope that the foregoing will help someone else!     Thanks for your time!

  Carrmas dad

• My driver for my CD/DVD drive

  My driver for my CD/DVD player is off and I can't access the drive. How will I know where to look for re - light the pilot?  I use Windows 7 Home. My Computor is an Acer Aspire thanks

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Please give the link to download the HP UPD PS driver for my new color CP152n laser printer, I am Anand

  Please give the link to download the HP UPD PS driver for my new color CP152n laser printer, I am Anand.

  I use professional windiw 64 bit os

  Thank you

  Pilot the site of the UPD is here: http://www.hp.com/go/up

  You can download the driver of the UPD PS here: HP Universal Print Driver Postscript

  I could only locate the LaserJet CP1525 and in the list of products taken in charge, the CP1525 is supported by the UPD.

• name the new dvd

  When I put in a new DVD the computer automatically gives the new DVD of emptiness, a strange name with Chinese characters. I rename the new DVD, but is it possible to automatically find a blank for the name row or perhaps the date?

  It is usually a function/option of the burning in use software.

• Windows 7 serial key is integrated in the new DVD of restoration?

  Hello!

  I set up my laptop, but the key of Win 7 is not readable...

  Is the key in restoring integrated image or do I have to indicate the same as a 'normal '?

  Is the key integrated if I order the new DVD of restoration?

  Thank you!

  The recovery disk contains the image of Toshiba and this image Windows 7, drivers and other software. Windows 7 is already enabled and requires no serial key.

• Windows DVD Maker will not play on the TV DVD player

  I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?

  Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.

  Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?

  ======================================
  You didn't say if you have a folder VIDEO_TS on the DVD...

  OK... you say you can play DVDs on your freestanding
  DVD player and on your computer. Startups that appears
  DVDs are fine and the problems of members of your family
  need to be cleared up on their end.

  One thing I would try would be to publish the project as a
  .wmv movie file in a folder on my hard drive. Then I'd
  the following freeware to create a video DVD. There are
  a small chance that it would work better for you.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite X 200 and replace the HD-DVD player

  G ' Day

  I'm looking to replace the HD-DVD drive in my Toshiba X 200 (PSPBUA-00N007) with a Blu - Ray player (or burner). They are on the market yet and available at Toshiba (or, say, eBay)? What should I look for?

  The HD-DVD player is a cool historical anachronism, but Blu - Ray will probably be a little more useful for me in the future.

  Cheers for the help.

  Hello

  As far as I know, there are some Blueray drives on the market that can be used in the notebook. But the fact is that not all readers are compatible because different master/slave/c-salt settings.

  I didn t find information on compatible BR readers. I guess you will have to test it yourself.

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=123271&

  The last guys has updated the own X 200 with a LG blueray and it worked

• Need a new DVD player for Satellite 1800

  I have a Toshiba Satellite S1800-412 computer and I want to change my DVD - CD player, since he does not recognize DVD discs. Can someone tell me where I could find for this machine compatible readers (i.e. you can tell me a site or list with discs)? Thank you!

  Hello

  I found information that the compatible DVD player for Satellite 1800 is Toshiba SD-C2502. It is not just DVD recorder DVD player.

  Good bye

• I have widows vista and it let me download the new flash player.it says some thing he stopped downloading.but it does not say what/how can I fix that

  I had the old flashplayer 10 on my laptop but it says: I need the new Flash Player 11 to watch movies or video now.but it won't let me download guard .he stopping in the middle of the download and say something stopped her, but not that

  Hello

  Try to uninstall the old version of Flash before you try to install the new version; the uninstall to the provided link information:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Then try to download the latest version of Flash, making sure that you uncheck the Google Toolbar download option there:

  http://get.Adobe.com/flashplayer/

  See you soon.

• video files preview 'this file cannot be previewed because of an error in the windows media player manager rich low."

  I used to be able to watch VIDEO (including the .avi) files in the preview pane in windows Explorer, but it has since stopped working. This change took place after the update to the latest version on windows media player. (version 12.0.7601.18150)

  attempted fixes:
  1. in options from files of the variations of tab - all reviews of checking / unchecking "always show icons, never thumbnails" and "show previewhandlers in the preview pane. the first has nothing to do with this problem. However, the 'show previewhandlers... '. "when checked this error message is displayed in the preview pane" "this file cannot be previewed because of an error in the windows media player rich preview Manager." When unchecked the poster preview pane a thumbnail with the icon of the program it is supposed to open, in the present case, WMP, this correction allows the preview of the PHOTO but NOT of VIDEO. " also I reset by default, of course.
  2. they also examined the options under system settings panel-advanced control and troubleshooting without success.

  all the less someone ' one can confirm that there is a problem with windows media player? or it comes from windows Explorer?

  UPDATE:

  I found this temp. The difficulty of the problem:
  https://www.YouTube.com/watch?v=xBgrJ3XO-Z8

  This shows that the problem is with WMPRPH.exe (Windows Media Player Rich Preview Handler) it happens when wmprph farm, now if someone knows how to impose this program to continue to work as it should which would solve my problem.