Flash image video disappears in DW when start selected

Similar Questions

• FireWire Camera disappeared to MAX when you select the driver NOR-IMAQdx

  Hi, as the title suggests, I'm having a problem getting my camera firewire (a PixeLINK PL-A742) appears in MAX so I can use it in my application. First of all, a bit of history.

  It was all works fine on an old computer (Windows XP SP3, LabVIEW 8.6.1, NOR-IMAQdx 3.2).

  We just received two new computers. They have Windows 7 Professional 64 - bit installed on them, then we are stuck using that (I was going to install labview in XP Mode, but there is no support for firewire, which no longer works). After finally getting installed labview (to run the setup.exe from Distributions\LabVIEW-ENG\LabVIEW861\, rather than make the autorun) we cannot get this camera to work. It works very well with the PixeLINK pilot (and Capture OEM program that accompanies it).

  So here is what I tried, and what happens when I do.

  (1) install cost of LabVIEW (including IMAQdx 3.2) and PixeLINK drivers.

  (2) at this stage, the camera works very well in the PixeLINK application

  (3) start MAX. It detects the camera and shows under devices NOR-IMAQdx. When you click on the camera, it informs me that the selected device is not currently associated with legacy OR-IMAQ driver IEEE or the driver OR-IMAQdx. This is perfect, it is supposed to do.

  4) click camera > driver > choose NOR-IMAQdx IIDC camera digital

  (5) he then disappears from MAX (no record OR-peripheral IMAQdx more). If I goto windows Device Manager, it comes under National Instruments IMAQ Interfaces as NOR-IMAQdx IIDC camera, says the pilot did get properly, it just does not appear in MAX more...

  (6) at this point, there is nothing I can do to get it back to the MAX (except in Device Manager to switch the driver on the PixeLINK one, then he pops up and we return to step 3)

  So, any ideas? This could be a problem with firewire interface and not the camera? I use the FireWire on my computer. It presents itself as Texas Instruments 1394 OHCI compatible host controller in Device Manager.

  Here are a few screenshots to help illustrate my problems.

  It is the initial configuration using the PixeLINK driver.

  

  It's MAX with the PixeLINK driver

  

  As soon as I click on the NOR-IMAQdx IIDC camera, it disappears

  

  And here's what it looks like in Device Manager after you have selected the NOR-IMAQdx driver

  

  Anyone have any ideas? I'm open to anything. At this point, I'm completely at a loss to know what to do.

  Thanks in advance,

  Devin

  Mechanical engineering intern

  University of Victoria

  Well, you can just ignore this message now. I solved my problem. I installed Vision Acquisition software 2009 and it seems to have solved my problem.

• Did someone met flashing images/shapes when loading content before flash?

  Hello

  I had a question about a problem that I guess is flash related on Google Chrome.  I tried to get help on the forums of chrome but my messages seem to have ignored or not seen and it is quite frustrating.

  It's a question I've had for at least a month and a half or so Flash content, initially, I thought it was just the Youtube/Dailymotion videos, but it turns out that there's similar behavior on the ads that appear on the pages as well.

  The question is about a fraction of a second flash (sometimes a little longer) which seems to be a pixelated object, until the bar video is displayed and the video plays as usual.  It seems to happen on occasion, with at one point this happens quite often.  I noticed the problem has decreased somewhat, although I occasionally see the flash still occur.

  It seems to be a problem with Chrome, I was not able to reproduce this issue/event with other browsers at all, I can say that I solved the problem by disabling a plug-in of flash (when it was two more distinct) on an earlier version of chrome.  However in the recent updates of chrome, it seems that the problem appeared again.

  I apologize if this is the wrong place for this question but I wanted to ask these people here and adobe their opinion on this issue and that the guys they thing I can do to prevent it from happening.

  I have a number of screenshots showing the flashing image or article that I managed to catch via the printscreen.

  

  

  

  I have a few other screens that are similar and can show those that well if people want to see them, just did not clutter up my first post, would really appreciate if someone can explain why this happens? I would really appreciate it.

  Thank you

  This seems to be a bug in version PPAPI of Flash Player for Chrome.

  To work around the problem, you can switch to the more mature NPAPI version.  See the thread below for instructions.

  Here is the public bug for reference:

  https://BugBase.Adobe.com/index.cfm?event=bug&ID=3348704

• After an automatic update to my Adobe Flash, I'm having a problem when I try to play videos.

  Original title: Adobe Flash issue

  After an automatic update to my Adobe Flash, I'm having a problem when I try to play videos. When I click on the arrow 'play' for a video, that I get this pop-up window that has something to do with having given permission for the site I'm on being stored on my computer. The box gives me two options: allow or deny. Why can't I click on one of these options?

  Hello

  Always get updates directly Flash from Adobe.

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• When starts to Flash builder support export for Windows Mobile OS?

  When starts to Flash builder support export for Windows Mobile OS?

  I think that VB was confused by call you 'Windows Mobile', such as Windows Mobile is MS is obsolete, abandoned Mobile OS for the era pre-iPhone with a stylus and all that, I guess that you probably meant 'Windows Phone' / Windows 8 Metro UI / RT of Windows, the new iPhone, as MS Mobile OS.

  See this thread: http://forums.adobe.com/message/4526684#4526684

• Image disappears in tilelist when scrolling and sliding

  Hello

  I use vbox as itemrenderer to tilelist. Inside the vbox component image is used. I created the image source using bytearrays. The images are loaded dynamically in tilelist perfectly. But when I scroll the tilelist, or drag the tilelist images then disappear the images that are created dynamically. But the images that are loaded in the application creationcomplete event, these images are not getting any problem means they are visible when I do scroll or drag them. Why this is happening and how to make the visible images of all time. Any help is appreciated.

  With our thanks,

  Srinivas

  Hello

  When you use a bytearray to store an image make sure that it is a new array, not a pointer

  BA: ByteArray = imagedata only points to an image so refreshing the tile cuase list issues you see.

  This will fix it

  var BA: ByteArray = new ByteArray();

  
  ba = imagedata;
   ImageCollection.addItem(ba);  <=== ImageCollection(arrayCollection) is the dataprovider
  

  David

• Apple icon flashes red once when starting the

  Suddenly, new iMac (drive merger) began to display a flashing icon of Red Apple at the start, but it does not start successfully, a bit slower than normal. A glaring red box box icon flashes red once during start up. Installed Sierra 10.12 on September 21, but this cannot be connected. With the help of an Apple technician, I put the machine through the

  • Disc utilities check App and through the restore process

  Reset SMC •

  • Safe mode starts

  • Memory NVRAM reset (three times)

  • Restored to point a few days before the problem occurred?

  Perplexing phone technician, and the master builder that he consulted had no answer. I am at a loss. Is there a problem, and if so, what should I do next.

  Thank you

  Pat (October 4)

  I have the same problem since I installed Sierra (2 days ago)

• iTunes appears in the taskbar for 5 seconds when starting upwards

  iTunes makes its appearance in the taskbar when starting this past 2 weeks now, also the image of the desktop appears and then disappears leaving a blue screen with icons showing only. Running Windows XP

  Best regards, Michael

  Good day to you Jacques, thank you very much for your help.

  I deleted the old account (corrupt) via the new account, control panel > user accounts is the normal way to delete an account, but maybe not with an account that is damaged? This account has not entirely removed, I guess there's about 34 GB hard disk!

  I was then looking for another way to remove the remains via my computer > properties > Advanced tab > user profiles click settings, this also not failed to remove the remaining files.

  I had a look at your mode of deleting an account; In my version of Windows XP after system tools > there is no local users and groups to see what has been so far I could go. What makes an operating system recovery (reinstall the Windows XP operating system) is called for as the only way forward, this issue goes into a new question/answer see http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/error-signature-bccode-1000008e-bcp-c0000005-bcp2/2ce5c688-927f-4c00-be83-562ad75e6b82

  The answer

  I was slow to identify this problem; the installation was corrupted. The iTunes updated in November and it was when he started and created a big problem. I realize now more important to uninstall iTunes and QuickTime as soon as it is noticed.

  iTunes gives assistance with uninstalling, they fail will add or remove to remove, this is the link of web http://support.apple.com/kb/HT1925#1 you will probably need help deleting the non movable files use the following links.

  The first http://www.ehow.com/how_8526319_delete-locked-dll.html site that led you to the second site http://www.gibinsoft.net/gipoutils/fileutil/index.htm that you need to leave this window open until the installation is complete, then it works fine.

  Use GiPo@MoveOnBoot to plan a DLL file for the next time that you start your computer to ensure that the software deletes the file before deleting. The GiPo@MoveOnBoot utility is included in the defined GiPo@FileUtilities that allows you advanced operations of the system, such as installation disc and read the error checking.

  Set a system restore point and use the registry cleaner to remove iTunes and quick time etc. Leverage research as well find and remove these obsolete entries, make sure you delete the entries for other programs and My Documents or Favorites can use the tools new in C Cleaner registry cleaner will allow you to remove the entry from QuickTime remaining via Add / Remove.

  When you are done I suggest run Disk Cleanup, and then Disk Defragmenter open via accessories command prompt and enter sfc /scanonce press the Enter key, it should say that after the next startup it will start checking files.
  It scans all protected system files and replaces incorrect versions with versions appropriate Microsoft see the following link;

  http://www.TomsHardware.co.UK/Forum/59402-35-scannow%20

  You may need to verify these points by searching on the web to confirm these actions. I'm still not aware how know when reinstall iTunes installation is good, so for now I have not reinstalled it.

• Windows 7 - permissions - access to images, videos, doc files

  Original title: Question

  Due to a lack of access authorization of security, my files (images, videos, doc files) are blocked.how, it can be unlocked, so I can use them again.

  Shafiq salvation!

  In case you have Office 2010 Starter Edition, this applys to:

  This dialog box may appear when you try to double-click to open files:

  

  You can also see some of the icons associated with files Office have changed. Some users have reported the types of orange Tower, that some say the file file type icons appear empty or without the normal icons of Microsoft Office.

  

  This occurs because the operating system has lost the association between a file type and the application it is supposed to open it. This does not change the file, this will only affect the relationship between the operating system and the applications associated with documents. This means that the typical double action fails when you try to open the files.

  How do I solve this problem

  There are several options available to fix this problem. Each will restore specific products in a fully functional State. This is permanent patches rather than having to return to the opening of files within applications.

  1. use 'open with... '. "Any file missing its extension, right click and select 'Open with' and select 'Manager virtualization Client Microsoft Office' This will restore the file to the application type. In some cases, you will see "Microsoft Application Virtualization DDE Launcher". Select this option to restore the file type associations. You can also use the "choose default program... ' option, select the same option in this list permanently restore the association of file type to the correct application of Microsoft Office.

  

  2. in some cases, you may need to repair the installation of Office 2010 Starter Edition to restore all types of files. In this case, visit add / supprimer remove programs, select Microsoft Office Starter 2010 and select 'Edit' from the menu bar.

  

  You will be asked if you want to repair your existing installation. DO NOT SELECT "delete all associated with this product Office user settings" If you want to keep your settings on the local computer. Click Yes when you are ready. It will take a few minutes to fill out, and then you should be able to open the files on your computer by using a double-click action.

  

  Source and more information here: http://blogs.technet.com/b/office_sustained_engineering/archive/2013/09/18/office-2010-starter-edition-file-type-associations-missing-after-september-2013-update.aspx?Redirected=true

  I hope this helps.

  See you soon

  Julia

• Widget "Video background" appears not when I export? Desperate SOS student.

  Dear reader,

  I need emergency help to know how to make my widget "Video background" appear on the final published HTML export.

  The "Video background" widget is placed on the left corner of my master page. A screenshot below will show you the settings that I have for the widget. I used the URL of a YouTube video, I did, during the preview of my site, it seems to work perfectly. I scroll the background video remained fixed in place and when I clicked on pages the video looks even.

  

  Everything seemed normal, but when I tried to export the site as HTML background video disappeared, it was just a white Uni, everything was still there however.

  To export all the my video, what I did was:

  1. Click the arrow to the right of "publish".
  2. Select "export to HTML".
  3. My Web site name "myname.com".
  4. Click the folder next to 'rent', then create a new folder and call it 'my name '.
  5. Click 'OK' to save my website
  6. Compress the folder titled 'my name' so that it can be sent to my Professor via wetransfer.com

  If it means anything, I get a message of 'Active problem' when I click on export. I think I know what an asset he's talking and there's just that one image on one of my pages.

  Any help would be appreciated.

  

  A student desperate who has a great time on Thursday (14)!

  As this is a third party widget, I can't test to verify the process. But you can try to get a preview in the browser to verify the behavior, you can also create a test on BC place which would show how the site will display live.

  Concerning the use of the background video widget, Muse includes youtube widget that can be 100% width and with AutoPlay on, it should work on pages where the same master is applied. You can try this.

  Thank you

  Sanjit

• video to FLV created with flash 8 video encoder

  Anyone know why the flv files that I created using the flash 8 video encoder does not seem all the metadata in them? or maybe what they do but they never kick off the NetStream.onMetadata event so I can't read...
  
  Even if I use the "import video" function of Flash Pro 8, I have the same problem - still video FLV created using Sorenson Squeeze works very well, so I'm pretty confident that my code is OK.
  
  Even more strangely, if I use the FLVPlayback component comes with Flash 8, which seems to read OK metadata!
  
  Argh!
  
  Just to complicate things even more, using flash for NetStream.onMetadata said: "the utility Flash video exporter (version.
  1.1 or higher) incorporates video [...] time in the video file itself. »
  Far as I can tell I have the 1.0 version of the encoder/exporter video flash but I'm damned if I know where to get an update of...! Since CS3 came out, it has been harder and harder to get things about flash 8 on the Adobe site...

  Well, that's the thing - the metadata never trace if the video is encoded with encoder flash video, but this code would work very well with video encoded with sorenson squeeze.

  think that I worked on it now though: in order to pause the video at the beginning I call NetStream.seek (0) when I get "NetStream.play.start".
  For some reason when I do this with encoded flvs using the encoder flash video, stop the shooting onMetaData event - it works very well with other FLV files! weird... will have to find another way to break the video at the beginning I guess.

  Thanks for the reply though

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• Adobe Flash Player has disappeared from my modules FF & reinstall

  Adobe Flash Player has disappeared from my modules FF (version 4.0.1) & not reinstall. Adobe's Test page shows that I managed to install the latest version of Flash Player (10.3.181.34), but after trying this 4 times, Flash refuses to appear in my add-ons/plug-ins and now some websites do not work properly. (With the help of a Win7 Home, 64-bit, 1 MS Office).

  Because are different products and load/use/display of different types of files. You either have both installed because you use Web sites that require one or the other, or you don't. Do not worry about the reason why they are named the way they are appointed, it is the decision of Adobe. Just accept the facts and go on with your life.

  Shockwave Flash = Adobe Flashplayer

  • used to read the .flv video files, especially
  • http://www.Adobe.com/products/flashplayer/
  • https://secure.wikimedia.org/Wikipedia/en/wiki/Adobe_Flash

  Shockwave for Director = Shockwave Player

  • used mainly for games (puzzles, etc.)
  • http://www.Adobe.com/products/shockwaveplayer/
  • https://secure.wikimedia.org/Wikipedia/en/wiki/Adobe_Shockwave

• When I go to a particular Web site, certain content (in this case phone number) appears briefly and then disappears. But when displaying the same Internet site in safe mode, the content is visible.

  Question

  I have another type of problem with Firefox

  Description

  When I visit a particular Web site some content (the phone number in this case) appears briefly and then disappears. But when you view the Web site even in safe mode its ok the content is visible

  This has happened

  Each time Firefox opened

  3 days ago

  Troubleshooting information

    Application Basics
          Name         Firefox
          Version         3.6.7
          Profile Directory
            Open Containing Folder
          Installed Plugins
            about:plugins
          Build Configuration
            about:buildconfig
  

    Extensions
          Name
          Version
          Enabled
          ID
          Microsoft .NET Framework Assistant         1.1         true         {20a82645-c095-46ed-80e3-08825760534b}
          Skype extension for Firefox         3.3.0.3971         true
          Xmarks         3.6.7         true         [email protected]
  

    Modified Preferences
        Name
        Value
          accessibility.typeaheadfind.flashBar         0
          browser.history_expire_days.mirror         180
          browser.history_expire_days_min         3
          browser.places.importBookmarksHTML         false
          browser.places.importDefaults         false
          browser.places.leftPaneFolderId         -1
          browser.places.migratePostDataAnnotations         false
          browser.places.smartBookmarksVersion         2
          browser.places.updateRecentTagsUri         false
          browser.startup.homepage         http://www.google.co.uk
          browser.startup.homepage_override.mstone         rv:1.9.2.7
          dom.max_script_run_time         1800
          extensions.lastAppVersion         3.6.7
          general.useragent.extra.microsoftdotnet         (.NET CLR 3.5.30729)
          network.cookie.lifetimePolicy         2
          network.cookie.prefsMigrated         true
          places.last_vacuum         1279193068
          print.print_printer         Samsung ML-2010 Series
          print.printer_CutePDF_Writer.print_bgcolor         false
          print.printer_CutePDF_Writer.print_bgimages         false
          print.printer_CutePDF_Writer.print_command
          print.printer_CutePDF_Writer.print_downloadfonts         false
          print.printer_CutePDF_Writer.print_edge_bottom         0
          print.printer_CutePDF_Writer.print_edge_left         0
          print.printer_CutePDF_Writer.print_edge_right         0
          print.printer_CutePDF_Writer.print_edge_top         0
          print.printer_CutePDF_Writer.print_evenpages         true
          print.printer_CutePDF_Writer.print_footercenter
          print.printer_CutePDF_Writer.print_footerleft         &PT
          print.printer_CutePDF_Writer.print_footerright         &D
          print.printer_CutePDF_Writer.print_headercenter
          print.printer_CutePDF_Writer.print_headerleft         &T
          print.printer_CutePDF_Writer.print_headerright         &U
          print.printer_CutePDF_Writer.print_in_color         true
          print.printer_CutePDF_Writer.print_margin_bottom         0.5
          print.printer_CutePDF_Writer.print_margin_left         0.5
          print.printer_CutePDF_Writer.print_margin_right         0.5
          print.printer_CutePDF_Writer.print_margin_top         0.5
          print.printer_CutePDF_Writer.print_oddpages         true
          print.printer_CutePDF_Writer.print_orientation         0
          print.printer_CutePDF_Writer.print_pagedelay         500
          print.printer_CutePDF_Writer.print_paper_data         9
          print.printer_CutePDF_Writer.print_paper_height         297.00
          print.printer_CutePDF_Writer.print_paper_size_type         1
          print.printer_CutePDF_Writer.print_paper_size_unit         1
          print.printer_CutePDF_Writer.print_paper_width         210.00
          print.printer_CutePDF_Writer.print_reversed         false
          print.printer_CutePDF_Writer.print_scaling         0.70
          print.printer_CutePDF_Writer.print_shrink_to_fit         true
          print.printer_CutePDF_Writer.print_to_file         false
          print.printer_CutePDF_Writer.print_unwriteable_margin_bottom         0
          print.printer_CutePDF_Writer.print_unwriteable_margin_left         0
          print.printer_CutePDF_Writer.print_unwriteable_margin_right         0
          print.printer_CutePDF_Writer.print_unwriteable_margin_top         0
          print.printer_Samsung_ML-2010_Series.print_bgcolor         false
          print.printer_Samsung_ML-2010_Series.print_bgimages         false
          print.printer_Samsung_ML-2010_Series.print_command
          print.printer_Samsung_ML-2010_Series.print_downloadfonts         false
          print.printer_Samsung_ML-2010_Series.print_edge_bottom         0
          print.printer_Samsung_ML-2010_Series.print_edge_left         0
          print.printer_Samsung_ML-2010_Series.print_edge_right         0
          print.printer_Samsung_ML-2010_Series.print_edge_top         0
          print.printer_Samsung_ML-2010_Series.print_evenpages         true
          print.printer_Samsung_ML-2010_Series.print_footercenter
          print.printer_Samsung_ML-2010_Series.print_footerleft         &PT
          print.printer_Samsung_ML-2010_Series.print_footerright         &D
          print.printer_Samsung_ML-2010_Series.print_headercenter
          print.printer_Samsung_ML-2010_Series.print_headerleft         &T
          print.printer_Samsung_ML-2010_Series.print_headerright         &U
          print.printer_Samsung_ML-2010_Series.print_in_color         true
          print.printer_Samsung_ML-2010_Series.print_margin_bottom         0.5
          print.printer_Samsung_ML-2010_Series.print_margin_left         0.5
          print.printer_Samsung_ML-2010_Series.print_margin_right         0.5
          print.printer_Samsung_ML-2010_Series.print_margin_top         0.5
          print.printer_Samsung_ML-2010_Series.print_oddpages         true
          print.printer_Samsung_ML-2010_Series.print_orientation         0
          print.printer_Samsung_ML-2010_Series.print_pagedelay         500
          print.printer_Samsung_ML-2010_Series.print_paper_data         9
          print.printer_Samsung_ML-2010_Series.print_paper_height         11.00
          print.printer_Samsung_ML-2010_Series.print_paper_size_type         0
          print.printer_Samsung_ML-2010_Series.print_paper_size_unit         1
          print.printer_Samsung_ML-2010_Series.print_paper_width         8.50
          print.printer_Samsung_ML-2010_Series.print_reversed         false
          print.printer_Samsung_ML-2010_Series.print_scaling         0.70
          print.printer_Samsung_ML-2010_Series.print_shrink_to_fit         true
          print.printer_Samsung_ML-2010_Series.print_to_file         false
          print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_bottom         0
          print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_left         0
          print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_right         0
          print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_top         0
          privacy.clearOnShutdown.downloads         false
          privacy.clearOnShutdown.formdata         false
          privacy.clearOnShutdown.history         false
          privacy.clearOnShutdown.sessions         false
          privacy.cpd.siteSettings         true
          privacy.item.cookies         true
          privacy.sanitize.migrateFx3Prefs         true
          privacy.sanitize.sanitizeOnShutdown         true
          privacy.sanitize.timeSpan         0
          security.warn_viewing_mixed         false
  

  Version of Firefox

  3.6.7

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.7) Gecko/20100713 Firefox/3.6.7 (.NET CLR 3.5.30729)

  Plugins installed

  • -Version 1.2.0.0
  • NapsterLink
  • 6.0.12.1675
  • RealPlayer LiveConnect-Enabled plug-in
  • Netscape Plugin RealJukebox
  • Adobe PDF plugin for Firefox and Netscape
  • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
  • Default plugin
  • Google update
  • Shockwave Flash 10.0 r42
  • Adobe Shockwave for Director Netscape plug-in, version 11.5
  • Plugin Picasa
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Problems with phone numbers does not display correctly can be caused by the Skype extension (Tools > Modules > Extensions)

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

• Video rendering error 10008 when using PNG on clip

  As soon as I add a PNG above a video clip, it fails when I try to make. It gives the error code 10008 is. I tried several png. If you add in front of a video, it will work fine. As soon as you try to use the same image over the video (using a logo for example), it fails as stated above. This means that I'm not able to add a logo watermark to videos.

  Please notify.

  Thank you.

  A simple alternative is to put your watermark on a green or blue background as a pdf file, then use the green/blue screen installation.

  I remember reports that contain PNG used to ensure transparency in photo - images to have exactly the same dimensions of the pixel as the setting of the project, for example, 1920 x 1080 full HD.  However, if this were not the case, I thought they still made, but have been converted to PDF, if transparency does not.

  Geoff.