External hardrive found but not found?

Similar Questions

• Tecra M5 - external monitor detected but not image

  Hello

  I just bought Tecra M5 for use with my external NEC monitor. However, regardless of the configuration, I try I get no image on the monitor. The LED on the monitor indicates that it receives the signal from the laptop but the monitor remains black pitch. The monitor works obviously very well, I just disconnected from another laptop.

  I tried all possible settings in the nVidia control panel, but without success. I also changed "Power On Display" in the BIOS "Screen LCD + Analog RGB" but no luck either.

  I have v.3.70 of BIOS and graphics card drivers v.7.15.

  Can anyone help?

  Thank you
  Mike

  PS When I press Fn + F5, I have no options to choose from, unlike the other FN +... combinations. I don't know that it should be everything, but it is perhaps worth mentioning.

  Also when I select only 'use a view' of the nVidia control panel and select my NEC monitor in the list, the monitor turns on and the light turns green, but the screen is still black. Like I can't accept changes the output switches to the computer screen after a few seconds.

  Hello

  I think you should test with the preinstalled Toshiba operating system.
  After that the laptop was recovered, connect the external monitor and use the FN + F5 in order to detect the external display.

• I found an old vista home basic dvd with a key, how can check whether key works but not install it?

  I found an old vista home basic dvd with a key, how can check whether key works, but not install it? some dvd install can be live boot from themselves too [password required for a direct start?]?

  Hello

  You must install it to see if it is legal to do so.

  There is no public database of product keys.

  See you soon.

• Sought but not found blackBerry smartphones

  I searched but not found. This means that more probably I just looked in the right place.

  What I'm trying to find is the total number of contacts will hold the 8530. IE; 500? 1000?

  I know that each contact will be so numbers and an email address but how many individual contacts you can add?

  Hi and welcome to the forums!

  I have yet to see a credible source to publish current limits for the records on the calendar, Memo, tasks, or contacts apps. If you find a thanks for posting. I usually tell the users to keep it is manageable. For me 6 000 contacts? Seriously?

  Heck, I didn't was not stationed with 6,000 people in the U.S. Army. .

  Don't forget that the memory of the camera is a flash memory, which is designed to keep all functions of the device running at eye level. Storage of large quantities of documents just takes a lot of dynamics of memory and makes static.

  Let me know your opinion!

  Thank you

  Bifocals

• Premiere Elements: I'm doing a montage which is the size of the postcard.  I found how to import pictures, but not how to make a collage.

  Aargh.  I don't know even what are my questions.  I bought the Premiere Elements: check.  I downloaded my purchase: check.  I'm CONFUSED now.  I am trying to achieve a montage which is the size of the postcard.  I found how to import pictures, but not how to make a collage.  I read the instructions to "seek" how to make a collage.  I am more than 50 years, maybe that's my problem.  Please help me to achieve this simple montage.

  [Ask in the correct forum allows... Left Pro for first things first... MOD]

  [title published by mod]

  Premiere Elements is a video editor. You try to make something of a video collage of your photos?

  If you try to make a photo montage in Premiere Elements, you use the wrong tool for the job.

  If you try to make a photo montage, there is a number of tools to do this in Photoshop Elements and the elements Organizer. Actually, the organizer has a tools especially designed to create collages of photos on the tab create. Have you tried to use this tool?

  BTW, I said goodbye to 50 a long, long time ago, pamela. It is really not difficult once you know what you want to do and where are the tools. You will want to perhaps by the book "Muvipix.com Guide Photoshop elements & first Elements 14", available on Amazon, which shows you step by step how to use all the tools in the programs as well as the Organizer.

• Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired,)

  Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired, haha)... hoping someone can help, please and thank you

  You can try with below steps if you want:

  Folder Temp light 1).

  (2) close all running Applications.

  (3) close webistes all opened browser.

  (4)disable the firewall temporarily.

  (5) open only Adobe Web site as it is safe and secure site free of all kind of threats.

  (6) then try to download CS 6 Design Standard and check.

  Note: Though the firewall is disabled. do not open applications, files or even other Web sites.

  Or if you think it is still very slow and would not turn off the firewall , you can try with 3' rd party like download managers: IInternet Download Manager , which is more efficient than the browser built in downloader.

• I went in lightroom today and it can't find my photos. I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive but didn't budge them. I did the simple troubleshooting and I

  I went in lightroom and can't find my photos. I lost the link before and did the right click to find and they have been found, but it's different.

  I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive, but even once did not move them. I did the simple troubleshooting and it doesn't work.  I'm trying to find the original by right clicking the? on the folder LR and once I find the file it tells me that Lightroom has this file already in the catalog - and I want to merge. I tried one and it disappeared or moved. Help!

  Use the file Explorer to see if the images are still in their original location. I suspect that move instead of copy them. This can happen if you drag you the.

  I found that it is best to use either right click on a file or folder name and select copy then right click on the drive-destination folder and select Paste or use keyboard shortcuts to copy and paste folder and files from one disk to another. The keyboard shortcuts are the CTRL + key C to copy and Ctrl + V to paste in the selected destination folder-drive.

• Western Digital external Hardrive not recognized.

  Original title: Western Digital external Hardrive

  I bought a new laptop HP Windows 8 and im trying to connect to an external hard drive (Western Digital) I connected the hard drive on my USB 2.0 port, however it does not appear in my computer for me to be able to access one of my files?

  When I go into Device Manager, I can see the status by saying "this device is working properly" but why can't, I see?

  Help, please

  Hi, Carlos

  I had this problem fixed thanks, I finally got to partition the hard drive and have upward and currently underway.  Thanks for your help.
  Concerning
  Jan

• External HDD USB3, only not to behave on a PC (with USB3, but OK on USB2)

  I have two PC of Windows 7 (32-bit) with USB3.
  A desktop PC and a laptop (with built-in USB3)' PC with USB3 additional PCI card.

  Yesterday, I took delivery of a Toshiba Canvios Plus portable 1 TB USB3 drive external HARD.
  It works very well with the laptop. It does not so well with the PC (on USB3).

  I already use ports USB3 on the PC for a 3.5 inch 2 TB Segate external HARD disk and a couple of USB3 flash drives.
  Those who work quite well.

  The new Toshiba works fine (although slower than full USB3) on the PC when it is connected to USB2.

  I downloaded and installed latest via drivers for the USB3 on the PC and which makes no difference.

  Symptoms that are very different from small copies (at best a few small files) FOR the Toshiba are very slow and hang up unless I'm doing something else on the PC (for example, open a browser window or start my email client or...)-in which case, it gives a short burst of activity before slowing down / suspended once again. If I continue to initiate other activities unrelated, it completes OK.

  Deleting files also seems to be a small problem (of similar issues).
  But not so obviously. The copy of the device is better (but probably still not perfect).

  The Toshiba was provided to FAT32 and so I changed to NTFS (by deletion and recreation of the partition), but no improvement.

  In the resource monitor, the record shows at or very close to 100% active time while copies are (attempt) execution (even when he is seemingly suspended). And the indicator on the unit flashes while all this is happening on (which suggests that it is busy, even if nothing really happens).

  In addition, cancelling a copy often takes a long time to take effect (varies, but could easily be a few minutes or more).

  Any ideas?

  To be honest there is no troubleshooting options: Toshiba Canvio USB 3.0 HARD drive is a device plug ' n play.
  It must be connected to the USB port only and everything should work and works automatically.

  As far as I know each Canvio 3.0 HDD supports an internal shock sensor and ramp loading technology to protect your player...
  I'm not sure why the USB 3.0 device does not work in USB 3.0 port.
  There may be a problem of compatibility from the USB 3.0 chip... Maybe but it's just a suggestion...

  It would be interesting to know if this HARD drive may work correctly in another computer/laptop support USB 3.0 port.

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• External hardrive WD not recognized by Windows 7

  I can't get my external hardrive WD to be recognized by Windows 7.  The hard drive is a model more old, 500 GB.  Model number WD500H1U-00.  I tried to go to the website of WD driver and can't find a driver that works with Windows 7.  Whenever I click on my model number, it indicates that the drive works with Windows 2000 and XP.  Is this OK or I do something wrong when I try to download the driver?  Any help in this matter would be a great help.  Thank you very much.

  It requires no driver, it's a USB 2 key if its not work when you plug it in win7 should automatically detect it.

  The drive works OK on another PC?

  http://wdc.custhelp.com/app/answers/detail/A_ID/5316/p/209, 211/c/123/session/L3RpbWUvMTQzMzYwODc0NC9zaWQvSVQzYnpkb20%3D

• Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

  I'm trying to connect to my external hard drive, but the auto test failed
  and I know that the problem is not the cable or anything like this cause it works on other 2 computers
  It won't work on my laptop
  I tried many solutions but most of them that the hard disk appears in disk management

  and they change its trajectory

  but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
  After that I did any suggestions? !

  Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

  Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  J W Stuart: http://www.pagestart.com

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last

  I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last two weeks.

  Please re - locate all of the missing images.

  Reference: How to find the lack of photos in Photoshop Lightroom

  Kind regards

  ~ Mohit