Flash stand alone player .flv.

Similar Questions

• need a flash stand alone player

  currently have version 7 installed that came with Flash MX problem is sometimes find is not at its height...

  essentially to put l want a more updated version of the standalone for l player can run files with newer as the stand alone player l versions currently use fails pretty badly when executing the files showing only half of their content.

  You can't get the standalone version except with Flash Professional. Believe me, I've tried for a few years. You MAY be able to download a trial version for 30 days, but I don't know if the stand-alone version works always after the trial is up, or if it will take off with Pro when uninstall you.

  https://creative.Adobe.com/products/Flash

• First 10 Elements: Menu DVD does not work on your stand alone player, file Open_DVD\Sources

  Hallo,

  I have prepared a project with Premiere elements 10 using video clips of 1440 * 1080 with some petite markers and menu structure. The structure of the DVD encoded has VIDEO_TS (as usual) and OpenDVD records which is new to me and that obvoisely contains important information.

  Read the DVD with Windows Media Center, everything is good. Using a stand allone player that the menu not played correctly, the proportions are not correct and there is no possible navigation. I tested the DVD in an electronic market with many players and found only one or two who have been able to read the DVD. My questions:

  How to build a DVD that consists only of the VIDEO_TS folder with all menu information included, and which is compatible with a standard DVD player? (what settings)

  What is OpenDVD folder?

  Thank you for your response, best regards

  Your project Preset should match your Source footage, as close as possible.

  If you go on a DVD, a workflow would be to import and edit your material anamorphic 1440 in a corresponding project. Then, once finished, / the share of exports in DV - AVI, create a new DV (DS) project, import this file DV - AVI inside and do what the authoring, then burn to disc for the DVD.

  Good luck

  Hunt

• Stand-alone player full screen not working not not on Vista MS

  Hello!
  I made full-screen independent publish with AS2, Flash Player 9. Everything works fine on XP Ms. But MS Vista when you go full screen, all you can see is background color (all other content disappears).
  I tried 2 AS and AS 3, downloaded, newer flash drives etc.
  After some tests, I noticed that when I disable "hardware acceleration" in menu flash player it works fine on Vista too.
  Can someone help me?
  Meybe anyone knows how to disable hardware acceleration with Action Script?
  
  UPDATE:
  I downloaded the "flash_player_update6_flash9" package, uinstalled flash player, install the drive/copy files form package and it works fine now on Vista OS.
  
  
  Peter

  Hello!
  I made full-screen independent publish with AS2, Flash Player 9. Everything works fine on XP Ms. But MS Vista when you go full screen, all you can see is background color (all other content disappears).
  I tried 2 AS and AS 3, downloaded, newer flash drives etc.
  After some tests, I noticed that when I disable "hardware acceleration" in menu flash player it works fine on Vista too.
  Can someone help me?
  Meybe anyone knows how to disable hardware acceleration with Action Script?

  UPDATE:
  I downloaded the "flash_player_update6_flash9" package, uinstalled flash player, install the drive/copy files form package and it works fine now on Vista OS.

  Peter

• Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year; want a more recent version.

  Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year (February 11, 2013); want a more recent version.

  Cannot find a lot on the standalone viewer, except in the docs of Flash Builder, who says a .swf can specify to use. I can't find a download link.

  Thank you, Doug

  You can download the standalone player (projector) since https://www.adobe.com/support/flashplayer/downloads.html

  Note that the download is the player, not an installer, you will need to manually .swf file association.

• 'Simulate download' option appearing only in the stand-alone Flash Player debugger

  I have a strange problem - today I seem to have completely lost the 'Simulate download' option in the menu display of the standalone Flash Player. When the problem started, I ran the last 11.5 TIME Installer Flash drive and then downloaded the latest version of the debugger, but still no dice. The stand-alone version, that I am running is called "flashplayer_11_sa_debug.exe" so it should work. Is there something special I need to do after loading a SWF file to get the ability to simulate the download? I thought that any standalone player debugger should give me the option of the simulate download once I loaded a SWF, but I tried older versions and they are also not showing this option for some reason any. :/

  FWIW, I use Flashdevelop and Flash CS5 Pro - I tried building/launch of my Flashdevelop project (which launches the debugger 11.x player) and directly from CS5 ide (which launches a debugger 10.x player), but neither has the simulation download option more. I also tried to launch another, older Flash project and I got the same results in the player.

  I can't imagine what is wrong, since this feature was yesterday in the drive and I don't have any major changes to my configuration of Flash Pro/Flashdevelop (AFAIK). Any help would be greatly appreciated, thank you!

  OK, I got it working again... I guess download simulation is only shown for me doing a release, not make a debug version. I don't understand, but I'm going with it! Thank you.

• Detection of Flash Player or plugin on stand-alone systems

  I was instructed to download and apply the latest flash player (to be in conformity with the operational guidelines for patch vunerabilities) to our stand-alone systems that are not connected to the internet.  These systems can be connected to the network because of contracts existing between our Organization and the contractor.  I was able to download the latest version of flash player/plugin for these stand-alone computers.  Our office is not interested to install Flash player for computers that do not already pre-installed flash, only those who have older versions that need to be patched.  My problem is what I've done the research implies solutions that require access to an internet/Web page to check if the Flash has been installed.  Is there another method to check if Flash Player or the plugin are on these computers without being connected to a network or the internet?  We are also prohibited to install any 3rd party software that is not approved for use in our Organization. Any suggstions will be appreciated.  All computers are 32-bit OS - Windows XP SP3 or Windows Server 2003

  You can download standalone installers from http://www.adobe.com/products/flashplayer/fp_distribution3.html

  Test if you have Flash Player installed - will do you that manually or with a script?

  FP is installed to

  • C:\WINDOWS\system32\Macromed\Flash (32-bit systems)
  • C:\Windows\syswow64\Macromed\Flash (64-bit systems)

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?

  I use my Windows Media Player v11 with extra codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works very well in the stand-alone application, but when I use the ActiveX control in the regulation, it does not use the codec and I get only sound... no picture. I thought that the ActiveX was merely an interface to the same application of base used by OR and the stand alone media player. And if it's the same kernel, it must use the same codec. What Miss me?

  I have a tip for you. If you download Quicktime 7 (QT), you can select the QT activex player (see picture). It plays mp4 and seems better. QT is free, so there shouldn't be any problem. Try and see if it make you good

• I bought lr 6 stand-alone disk and install it on my laptop. now I have a new iMac, but find that I can't install lr because it doesn't have a dvd player. How do we install?

  I bought lr 6 stand-alone disk and install it on my laptop. now I have a new iMac, but find that I can't install lr because it doesn't have a dvd player. How do we install?

  Hi Etienne, you can download Lightroom 6 for Mac here: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html and activate it using the serial number supplied with the version that you purchased.

• AIR works in debug flash CS5, but does not stand-alone.

  I have an application that uses the following code to access an XML file.

  var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

  var fileStream = new FileStream();

  fileStream.open (file, FileMode.READ);

  var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

  fileStream.close ();

  read soldout setting

  trace ("XML =", configXML);

  If (configXML.soldoutEnable == 'ON')

  soEnabled = true;

  on the other

  soEnabled = false;

  It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

  I am running CS5, AIR 2 on windows XP. Thank you.

  This forum is using the AIR, not any other type of AIR application. Looks like you have a different type of AIR application. I think you might want to try the regular AIR (probably listed under Flex) forum.

  Becky Williams

  -Sent from my Palm Pre

  August 7, 2010 10:48, farmerInCS5 <[email protected]> wrote:

  I have an application that uses the following code to access an XML file.

  var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

  var fileStream = new FileStream();

  fileStream.open (file, FileMode.READ);

  var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

  fileStream.close ();

  read soldout setting

  trace ("XML =", configXML);

  If (configXML.soldoutEnable == 'ON')

  soEnabled = true;

  on the other

  soEnabled = false;

  It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

  I am running CS5, AIR 2 on windows XP. Thank you.

• Flash ok but Player 9 installed 10.3 active for standalone swf files

  It is a rather interesting scenerio. I am running Vista 32 Bit (upgrade to Windows 7 soon) using IE9 and I try to view the .swf files that require Flash Player 10. No problem, I uninstalled all components of Flash Player using the Flash Player uninstall program. I rebooted, reinstalled Flash Player and confirmed all was working well. Modules are enabled, and all the controls reveal that I have installed 10.3. The problem that I am facing is when I try to run a separate .swf, the player file that appears says "Flash Player 9. The .swf file will not play as stand-alone, but it will play in my browser. How can I get Flash play 10 to be my default player? DRM for your help.

  As I posted earlier, the download is the standalone player, not an installation program.

  Everywhere where, that you downloaded, it will be there.

• Using PHP to develop stand-alone applications

  Hello, is it possible to use my existing PHP skills to develop a stand-alone application for the PlayBook? (offline)

  There is a product called Adobe ' Flash Builder for PHP ", but after having waded through tutorials, I'm not sure if this is the right product. Tutorials mainly speak on the development of a web application that allows the connection to the server live, which is not what I want.

  No, PHP is a language server side, not for applications on the client side. If you know PHP you know probably HTML5/JS too, then WebWorks would probably be the best place to start. If you want to go on the road to Flash/AIR, you will need Flash Builder 4.6 (standard or premium will do) or Flash Professional CS5.5.

• I have a (AIR-LAP1131AG-A-K9), I can set it up as a stand-alone?

  I have a lightweight access point (AIR-LAP1131AG-A-K9). I would like to use it as a stand-alone gateway (AIR-AP1131AG-A-K9). Is this possible? There are configuration changes that need to happen to make this happen? Do I need to use different operating system?

  Thank you

  Siva

  Plug the AP directly on your PC not the router.

  The best way to proceed is to comfort in the AP and make sure that the

  AP can reach the laptop via a switch or a crossover cable

  fixing directly from the laptop and the AP.

  With your cable from the console, you will be able to see if you pressed on the

  button for 20 seconds.

  By using a TFTP server to revert to a previous version

  Follow these steps to return standalone by LWAPP mode

  Download a version of Cisco IOS using a TFTP server:

  Step 1 in the IP address of the computer on which your TFTP server

  software should be from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure that the PC contains the image point (for example file

  as c1200-k9w7 - tar.122 - 15.JA.tar for series 1200 point access) in the

  The TFTP server folder and the TFTP server is activated. Monitor of the

  TFTP program to see the code for transfer to the AP.

  Step 3 Rename the access point image file in the TFTP server folder

  C1200-k9w7 - tar.default for series 1200 point access,

  C1130-k9w7 - tar.default for a series of 1130 access point, and

  C1240-k9w7 - tar.default for 1240 series access point.

  Step 4 connect the PC AP with a category 5 (CAT5)

  Ethernet cable. This must be a crossover cable if connected

  to the AP. Or ethernet cable is normal if the AP and laptop are connected

  to a switch.

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access

  point.

  Step 7 press and hold the MODE button until the status light turns red

  (about 20-30 seconds), then release.

  Step 8 wait that access point restarts, as attested by all lights

  Green followed the status light blinks green.

  Step 9 after the access point reboots, reconfigure using the graphical interface or

  the CLI.

  If the image is not download from Server/tftp on your computer, you may need to delete the previous image of tar on the access point of the console:

  Simply hold the mode button until the light is red.

  Then, by using the console port, make sure that the guest is AP: and do a show «»

  "Flash:" on the device and make sure that there is no image that begins

  "c1130-rcvk9w8-tar..." ». If there is an image that starts with who then

  Delete it with "delete flash:

• Change IOS on AP 1131AG light to stand alone

  Hi experts,

  can anyone advice if the ap 1131ag IOS can be changed to stand alone? can you give me a link where I could get a standalone IOS and how? Thank you!

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 set the timeout on the TFTP server in 30 seconds.

  Step 4 on the PC where, the TFTP server perform the following steps:

  a. disable the firewall, such as Windows, ZoneAlarm firewall firewall software, McAffee firewall or other.

  b. ensure that all Windows are visible. In Windows Explorer, click Tools > Folder Options > view. Deselect hide them extensions of known file types check box.

  Step 5, rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point, c1130-k9w7 - tar.default for a series of 1130 access point, c1240-k9w7 - tar.default for a 1240 series access point and c1250-k9w7 - tar.default for a 1250 series access point.

  Step 6 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 7 disconnect the power to the access point.

  Step 8 push the MODE button and hold the button while you reconnect power to the access point.

  Step 9 hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), then release.

  Step 10 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 11 after the access point reboots, reconfigure using the GUI or the CLI.