Flash Video Player with thumbs

Similar Questions

• Flash video player difficulties

  I usually watch videos on my computer especially flash ones. On some players like YouTube, the video plays well. On some readers outside of youtube flash video (ex: Brightcove, Ooyala, etc.), I watch the video normally. However, I feel a lag on every video I try to look at. Whenever I stop the video, the video continues briefly to play after I stop and then it stops after a few seconds of silent movement in the video.

  It also happens on my laptop Windows 8 as well
  I uninstalled and reinstalled flash on my system and I don't think he made the same round

  Hi Ele,

  Are you experiencing the problem with Internet Explorer and other web browser as well?

  If you use Internet Explorer and facing problems, watch videos online, then you can check out the link below:

  The video when problems using Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note:

  There is no option within the operating system to increase the speed of buffering. Only way to increase the speed of buffering in some measure is to have a connection with a higher bandwidth. But note that as does you not an option of continuous play in CD or DVD.

  Another work around that I do personally is to pause the video to complete the buffering and watch the video once the buffering completed.

  Please post back with the State of the question.

• Flash video Player?

  Hello
  
  I'm trying to harmoniously integrate a video player on my Web site.  Specifically, I want the image "header" on a page to turn it into a video player when a user clicks on an icon of small «watch the video»  I intend to use Flash CS4 to the project.
  
  A good example of this is located at the following Web site by clicking on the button "watch the video":
  
  http://www.actonmba.org/about/
  
  Advice or advice on how to proceed will be greatly appreciated!
  
  Thank you.

  Yes.

• Firefox crashes after the Flash videos play with black screen

  Everytime I play a video with Flash, the screen is black, even if the sound is played. Then, Firefox crashes.

  I use the latest Version of Firefox (28.0) on Mac OS 10.9.2 (new Macbook Air) and the latest version of Flash. I tried safe mode and disable my plug-ins to make sure it is Flash.

  I have re-installed Flash and installed, but it did not help.

  My Firefox crash reports say "hang." libsystem_kernel.dylib@0x15a3a ' signature and ' EXC_BREAKPOINT / 0x00000002 "due to the accident."

  Have you tried to disable hardware acceleration in Flash Player?

  • http://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Flash video player freezes during audio sequences

  For the past few days, whenever I play a video that uses Flash Player video freezes for a few seconds then repeat part of the audio. Once the audio repeat arrives to the point that the video freeze occurred, the video RESUME play as if nothing had happened.  What is happening on all the videos I watch on every website that I visit. It only happens once during each video (at least I have stop the video and restart) and it's always happening shortly after I start playing the video. I use Firefox for my browser. Flash Player and all the plugins are the most recent versions.

  Anyone have a thought on what could be the cause and how can I solve this problem?

  My guess is that it has something to do with hardware acceleration. You should try to extinguish it.

  You described exactly the thing that happened to me once today on a youtube video. Shortly after my pc BSOD on another video. I got bsod on this same video bit several times. After that, I tried this video with disabled hardware acceleration, and it worked. I tried again after with material on aceleration and it bsod. Same video work normally from chrome.

  There is obviously a problem between the ati cards and flash player plugin for firefox and hardware accelerator.

  1. I bet you have ati graphics card

  2. I bet you wouldn't have these problems if you try to watch these videos from chrome

• in the control bar Firefox Win10 very small flash video player

  512SSD i7, 16GB, surface book (again, not bragging a lot...)

  Win10

  44.0 Firefox

  Adobe Flash 20.0.0.286

  Play any video content flash game bar and progress are tiny.  I don't know how to change or correct it.

  I had this problem on a Lenovo Yoga 2, but never solved this problem.

  In MS Edge, however seems to be the right size.

  Please help as I want to use Firefox.

  Firefox does not give us the information needed to scale properly.  We are actively working with them on a feature in this issue, but in the meantime, you will have to endure or use a browser which provides us with information of the correct scale (Edge/IE/Chrome)

• Flash video encoding with x 264

  I'm going nuts trying to find a definitive answer on video encoding for FMS (RTMP).  All the docs I found speak by CBR (constant bitrate encoding).  But all the tools I tried to not support CBR or so bad it will take months to complete the work that I have.

  Does anyone know if the VBR is a dealbreaker for Flash using FMS video streaming?

  -J' tried Adobe Media Encoder supplied with CS4, but he does not like my source files.

  -Sorenson Squeeze 5 not CBR, but it is very slow.

  -x 264 seems to be the winner regarding the speed and quality, but it does not support CBR.

  -H264 of MainConcept does CBR (I think it's the same codec encoder from Adobe), but the Pro version is $ 1,000.  :-(

  Am I missing something?

  Any suggestion would be great!

  Hey once again

  IM using Sorenson on a laptop with Duo CPU 2.40 GHZ and 4 GB of Ram. Its no where it is as slow as you describe.

  From my experience, you should have a 1:1 relationship in the long term when encoding on a decent computer specced. So if the source material is 60 minutes it should take about the same time (maybe a little more short/long) to encode the material to a new format. Special like 2-pass VBR or similar settings could increase the time to.

  I suggest you contact Sorenson and ask if they might have a suggestion.

  Episode engine is in my opinion more than one professional tool - where higher prices. The performance is about the same that Sorenson on my laptop - but you have even more control of the different parameters. You can download a trial for the encoder Office on their site, I recall: http://www.telestream.net/episode/overview.htm

  FFMpeg is really decent too - but it lacks the nice interface of Sorenson.

• standard inside the screen wide video player

  Hello
  
  I have a Flash video player, built in ActionScript 2, I recently needed to move from a 4:3 ratio to a 16:9 ratio. The videos were transported to a Flash Media Server. The player is later rebuilds in ActionScript 3, but for now, it should stay in v.2 for a quick recovery. Back to the point of...
  
  The original videos were x 300px 400px. Videos big screen will be 534 x 300. As the 4:3 videos are not wide enough, I care about them float in the center of the player, with black "bars" on the left and right sides. Is there anyway to center the FMS streaming videos, while maintaining the proportions of origin of each video? It seems that YouTube is doing this already. They are in fact centering videos or are they "pretended" somehow?
  
  Any help would be really appreciated. Thanks in advance!

  Hi again JayCharles,.

  Thanks a lot for your help! Guessed it. Here's what I ended up with:

  ns.onMetaData = {function (obj.)}
  I placed the videoDisplay inside a clip named, object videoContainer_mc.
  videoContainer_mc._width = obj.width;
  videoContainer_mc._height = 300; //<-- height="" will="" be="" 300="" no="" matter="">
  };

  Works like a charm. Thanks for putting me in the right direction :)

• I can't watch flash videos, receive the missing message "Flash Player..."

  Hello
  I can't Flash videos keep getting message "lack the flash player plugin. However I installed flash player 12 several times, the installation appears to complete successfully, but reloading page flash player missing again appears. I can play videos from Youtube, because they play automatically using the html5 player. The two 12 Flash activex/plugin appears in the list of programs, but do not appear in the list of modules ff.

  I have tried to reset firefox, recently updated to 27, have also re-installed pluginsreg file as suggested, but nothing helps. Hope you will be able to help

  Thanks Shaun

  got to luv how to give an answer and someone of other walks all over you with the same answer in these forums

• Real Video Player/Adobe Flash Player

  I had problems in the past with my video player crashing using Adobe Flash player, including videos of Yahoo.com and my Real Player and now he disappeared totally dead. I tried to uninstall and reinstall Flash Player without problem, however when playing either video sites, Yahoo said "you must install Adobe Flash Player and Real Player said it must download component Add ' l to allow the video play, (of course once you do it does not help a bit)! The only thing I've done is to try to install Service Pack 2 on my system, but Needless to say, I'm having a devil of a time to perform this task no matter which reinstalls, backing up files, or what ever codec, or something that was recommended to me, so if anyone knows how to operate, or if it is even required to keep my system any information is greatly appreciated! OBE a Canope, U R my only HOPE?  Thank you in advance! Lorenzo

  Hi Lorenzo,.

  A. you use internet explore browser?

  B. recent changes made on your computer?

  Adobe flash player cannot have been uninstalled completely. I recommend you use the adobe removal tool to remove adobe flash player then download the latest version on your computer and check if the problem persists.

  Put your computer in a clean boot and disable security software before installing flash player on your computer.

  http://support.Microsoft.com/kb/929135

  NOTE: Place your computer to a normal startup after installation of flash player. Follow step 7.
  NOTE: Activate security software.

  How do I uninstall the plug-in Adobe Flash Player and ActiveX control
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Install Adobe Flash Player
  http://get.Adobe.com/flashplayer/

  Note: Microsoft does not control the websites of third parties and has not tested any software on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After the last windows patchday closing all by showing the video (flash/media player /...)

  Hello

  After the last patchday (last week) I can't watch videos. If I watch a flash video or a video with Windows Media Player, after a short period (1 to 5 min) Windows shuts itself. When I start Windows again, it does not open a crash report.
  I reinstalled my video card drivers and - because I thought installation may be broken - Microsoft Visual C++ 2005 and 2008 (redistr.).

  But nothing helped.

  Sometimes I can watch Flash videos all night and then all of a sudden Windows stops.

  Temperature is ok, coolers all run.

  Try a few game demos, they run well.

  I hope someone can help.

  Thank you very much!

  Aljoscha

  My Hardware Specs:

  Betriebssystemname Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  Additional Betriebssystembeschreibung not available
  Microsoft Corporation Betriebssystemhersteller
  SystemName NSA-01
  Manufacturer of the Systemhersteller system
  Systemmodell system product name
  Systemtyp x 64-based PC
  Intel Core i5 - 2550 K CPU @ 3.40 GHz, 3401 MHz processor, 4 Kern (e), 4 (r) processor logische (en)
  Version of BIOS/date American Megatrends Inc. 4105, 01.07.2013
  Version SMBIOS 2.6
  Windows-Verzeichnis C:\Windows
  Systemverzeichnis C:\Windows\system32
  Startgerat \Device\HarddiskVolume1
  Gebietsschema Deutschland
  Hardwareabstraktionsebene Version = "6.1.7601.17514".
  Installierter physikalischer Speicher (RAM) 12.0 GB
  Model realer GB Speicher 12.0
  Rechtssicherheit realer GB Speicher 9.74
  Virtueller model GB Speicher 12.1
  Virtueller Rechtssicherheit GB Speicher 9.47
  Big der Auslagerungsdatei 100 MB
  Auslagerungsdatei C:\pagefile.sys

  ----

  Name ATI Radeon HD 4800 Series
  PNP-Geratekennung PCI\VEN_1002 & DEV_9440 & SUBSYS_02781043 & REV_00\4 & 80E7924 & 0 & 0008
  Card Adaptertyp (0 x 9440) ATI graphics, Advanced Micro Devices, Inc. - scripte
  Adapterbeschreibung ATI Radeon HD 4800 Series
  Adapter RAM 1.00 GB (1.073.741.824 bytes)
  Installierte Treiber aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  Treiberversion 8.970.100.7000
  INF-Datei oem32.inf (section ati2mtag_RV7X)
  Farbebenen not available
  Farbtabelleneintrage 4294967296
  Resolution 1440 x 900 x 59 Hz
  32 bits/Pixel
  0xE0000000-0xEFFFFFFF Speicheradresse
  Speicheradresse 0xF7E20000-0xF7E2FFFF
  A-E-Port 0x0000E000-0x0000EFFF
  IRQ channel IRQ 4294967294
  A-E-Port 0x000003B0-0x000003BB
  A-E-Port 0x000003C0-0x000003DF
  Speicheradresse 0xA0000-0xBFFFF
  Treiber c:\windows\system32\drivers\atikmpag.sys (8.14.1.6264, 351,50 KB (359,936 bytes), 16.11.2012 20:39)

  Hello

  Try following the s method provided below and see if it helps:

  Method 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Method 2:

  Also check the power options, if your computer is configured to stop when idle.

  a. power by clicking on the Start button, open the Options click on the Control Panel, clicking system and Maintenance, and then clicking Power Options.
  b. in the select a power plan page, click on change settings for the plan under the selected plan.
  c. on the parameters of change in the plan page, click on change advanced power settings.
  d. on the Advanced Settings tab, expand lid and buttons power, expand power for the start menu button and then do one of the following:

  If you use a laptop, click on battery or plugged in (or both), click the arrow and then click sleep, Hibernate, or Shut Down.

  If you are using a desktop computer, click setting, click the arrow and then click sleep, Hibernate, or Shut Down.
  e. click OK and then click on save changes.

  Here are the articles that should give you more information on this topic:

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Check if you find an error recorded in the event viewer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  WHat information appears in newspapers events (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this helps, let us know the status of the issue.

• Problems with Flash video streaming in any browser (Windows 8.1)

  Hello.

  Since perhaps the last Chrome update (version 42.0.2311.90 m - I tried versions of 32 and 64-bit) or some 8.1 Windows updates (I don't know for sure), flash videos don't even start to buffer - they play only once the entire content is downloaded (or loaded into the reader of the site). Then, if I try to watch a video from a Flash Player based (like Dailymotion or Vimeo) interface, I have no streaming, and I have to wait a long time, watch a '1% ' or a wheel loading until the full content is available to watch.

  This is the case with all browsers, not just the Chrome (IE and Firefox too). I tried to update flash player (first version, 17,0,0,169 and then tried the beta version, a published April 14, 2015). No difference at all. So, I think that this could be a problem with the drive itself, or with some settings in Windows.

  
  

  So, lets go to the facts:

  -Happened all of a sudden no reason apparent - a day he worked, and he was not on the other day.
  

  -J' have the last version of every browser I use (Chrome, IE and Firefox).

  -My version of Flash Player is, currently, the latest version;
  -J' tried older versions of Flash Player. did not work;
  -This is not the case with HTML5, like Youtube video players, so I think that it is not a codec problem;

  -J' have the latest graphics driver nVidia. And it was happening even before I update the driver (I have a GeForce GTX 770);

  -J' tried to disable hardware acceleration on the Flash settings, nothing happened.

  -J' by default uses the Windows Firewall and defender. Tried to disable the firewall, nothing happened;

  -J' had looked all over the internet for the answer, but I can not find it. I already have all that Adobe troubleshooting pages told to do;

  -My internet connection is fine. It's a fast connection, and it's the wireless. I have several PCs connected to this network and video flash work well with them, that in this specific machine is not;

  -J' tried to uninstall flash player and install it several times with several different versions. Did not work;

  -Tried to disable as different versions of flash player on Chrome, nothing happened.

  
  

  The thing is, I can imagine that this might not be only a problem of flash player, but since this is the only problem with plugin, I, I thought you might have the answer.

  Thank you.

  Hello! It has been a while. If I could do the necessary research.
  First of all, thank you Jean-Luc for the answer.

  After the discussion, I discovered that it was not only not set buffer, but sometimes common downloads Flash videos too. Sometimes, I could see the download file only after being completely downloaded. So, at this point, I knew that was no more Flash video problems. Something must have been messing around with my proxy settings.

  I have fresh installed Windows 8.1 again. And I discovered that I had an app running in the background called "hora Buscapé na", which was a program automatically detect the best deals for products to buy here in the Brazil. I finished his task, and thing go back to normal, I guess. I tried to contact their support, but it's a maze to rethink the role of the contact.

  So, I'm sorry for the inconvenience and thank you for the help.
  I see many people with the same problem on the internet without answers, so for these people, there could be another application or process of screwing with your proxy servers.

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

• I need a video player Flash or HTML module, but none will install the component library plug-in Firefox software.

  I'm looking for a video player module Flash or HTML5, so I can watch Youtube and other videos in Firefox 51.0 Beta. But all the Add on Flash or HTML5 players in the library of add-on Firefox will download but refuse to install because none are compatible with the latest version of Firefox.

  I have instructions to download and install a 6.0.1 Android flash player compatible of Marshmallow directly from Adobe's Web site. But there are two 6.0.1 compatible Android files on the site names, and I don't know which one to use.

  Should I download and install the Flash player with the highest file alphanumeric name, assuming that it is the most recent version, or should I wait until I can get a definitive answer from Adobe?

  Oh, and happy Thanksgiving!

  My Firefox 51.0 b 1 Beta on Android plays video clips from YouTube in HTML without the need for any add-on.

  Office Firefox is similar to be able to play video content from YouTube HTML5.

  Try your Firefox as is, Happy Thanksgiving.

• problem with the tutorial: creating a dynamic playlist for streaming flash video

  Hi, someone tried the tutorial: creating a dynamic playlist for streaming flash video?
  
  I followed the instructions exactly as stated in the tutorial and test the fla file, it worked perfectly, when I open the swf file using macromedia flash 8. All looks good. Nothing has changed except that the url is replaced by 'rtmp://localhost/videosource' in the xml file.
  
  After I publish the file by using the parameter: network access only, I try to open the file swf and html file, the thumbnail does not appear and there is no way I can click on videos. What I see is that the list, and there is no answer the flash media server 2. All files in the same folder. Someone please help with this problem? Thank you

  .. .i debug movie step by step
  and realized that the xml file is read by the code...

  Your initial problem said it worked but not playing outside of the
  Flash authoring environment simply load the SWF from the hard drive.

  The Flash programming environment is an environment of confidence and so you really
  need to test what a swf loading in the mode of deployment since the
  hard drive is not a valid deployment, unless a Flash player installed is
  available outside the web browser that you would like you have the
  Authoring tool and your users will not.

  Use a browser with http://yourdomain.com/yourmovie.html to make final
  debugging.

  In this regard, you will need to debug movie when running in real time
  mode in a web browser with http:// A technical track, I suggested is of
  create a temporary TextField might be named out_txt and send the trace message to
  It's like out_txt.text += 'my Expression of Trace ".

  --
  LON Hosford
  www.lonhosford.com
  Number of happy bits exempts your way!
  "free23" wrote in message
  News:e4a37a$AK5$1@forums. Macromedia.com...
  Sorry but I don't understand what you mean... to debug the movie step by step
  and realized that the xml file is read by the code...
  It is a sample of my log files:
  #Fields: date time x - pid registered x x - ctx x-comment
  2006-05-15 20:08:58 3072 unloaded application instance (i) 2651170
  VideoSource/_definst_-
  2006-05-15 20:48:19 3848 (s) FCApplication 2641173 successfully loaded.
  2006-05-15 20:48:19 3848 (s) 2641173 Communication Executive
  successfully.
  2006-05-15 20:48:19 3848 (s) SimpleConnect 2641173 successfully loaded. -
  2006-05-15 20:48:19 3848 (s) successfully loaded 2641173 videoconference. -
  2006-05-15 20:48:19 3848 (s) 2641173 Video Playback loaded successfully. -
  2006-05-15 20:48:19 law enforcement components of Communication 3848 (s) 2641173
  successfully.
  2006-05-15 20:48:19 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: not defined.
  2006-05-15 20:48:19 3848 (e) 2641190 error: msg sent to the client command
  connection has been accepted. -
  2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: not defined.
  2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
  connection has been accepted. -
  2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: not defined.
  2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
  connection has been accepted. -
  2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: not defined.
  2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
  connection has been accepted. -
  2006-05-15 20:48:20 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: not defined.
  2006-05-15 20:48:20 3848 (e) 2641190 error: msg sent to the client command
  connection has been accepted. -
  2006-05-15 20:49:42 3848 (s) 2641173 sends this message: Hello! You are
  logged in as: false.

  I hope this helps...